pardes.git/test/snapshots/jumps.snap, branch main

Snapshots and GUI goldens run with the default Placement acme

2026-10-01T03:12:15Z

Their clicks follow the panes to where acme's placement puts them; doccol and splitparent stay on Placement pardes, which they cover. Co-Authored-By: Claude Opus 5.5

A column can be empty, as acme's can; new panes go where acme's makenewwindow puts them

2026-10-01T03:12:15Z

Newcol makes an empty column; closing a column's last pane leaves it empty with the keyboard on its tag; Delcol and Joincol alone take a column away; the session's last pane closing quits. The +New stand-in and replaceStillborn / stillborn_joiner are gone. Every new pane goes through exec.placeNew, which follows acme's makenewwindow (active column, empty column whole, blank space, halving the biggest) or, with Placement pardes, the old rules. ColumnTags is gone: column tags are always shown. A grip drag shows acme's box cursor. Co-Authored-By: Claude Opus 5.5

trunk: resume before the Reload experiment

2026-09-15T20:24:42Z

Empty marker on the last pre-Reload change. Keep the Reload experiment on reload (3801914), its first change on reload-start (200a1fc), and the unfinished performance investigation on reload-perf-wip.

host: the core owns the event loop; every platform becomes a vtable of optional methods

2026-08-25T12:42:07Z

look: richer path/range parsing, pdf rendering, corner-drag and stepgrain snapshots

2026-08-15T14:57:13Z

clipboard, n/N and the tty prompt: three things that were half-wired

2026-08-12T16:04:32Z

Three changes that all turned out to be the same shape -- a feature that worked in one direction, or for one pane kind, and quietly did not in the others. CLIPBOARD. Every register write emitted set_clipboard, so deleting one character threw away whatever the desktop was holding; multi-cursor yank took the join's early return and emitted nothing at all, so the same key reached the clipboard on one cursor and not on two. Nothing could READ the clipboard: the SDL shell had no SDL_GetClipboardText anywhere in it, and the tty shell never asked for OSC 52, so `p` from another application was dead in both. Now it is helix's split. y/d/c/p/P/R and the acme chords are the DEFAULT REGISTER and nothing else; the system clipboard is five words on helix's own letters -- SPC y, SPC Y, SPC p, SPC P, SPC R -- spelled as builtins so they land in Help and are executable like every other verb. The one exception is the tag `y` chord, which still mirrors out because a tag is always insert, so SPC cannot be pressed there, and copying the path out is the whole point of the chord. Reading is a new read_clipboard effect answered by an ordinary Event.paste, so the round trip is honest about being one: SDL and NSPasteboard answer inside the same drain, the browser answers a promise, and a terminal answers over OSC 52 or -- far more often -- refuses. A refused read is a paste that does not happen, and the request dies at the next keystroke rather than landing minutes late in whatever pane is focused by then. The tty shell also enables BRACKETED PASTE now and coalesces paste_start..paste_end into one event. Before this a paste arrived as a flood of individual key presses: plausible in insert mode, and in normal mode every pasted character ran as a command. n/N. They stepped the armed results buffer and immediately Looked each row, so you could not walk past a hit without opening it. They are a MOTION now: select the next look-able text, open nothing, and let Enter decide. What they step is the largest whitespace-delimited run look.resolve can act on (look.lookableSpan, wrapper punctuation peeled), over a RING of panes -- every pane that has performed a look, most recent first, then the output buffers that have not, newest first, and only if both are empty the pane in front of you. N is the exact inverse of n, computed rather than remembered: both directions ask the same question about the same spans and compare against the column the walk parks on, so x presses one way and x back land exactly where you started, pane boundaries and the ring's seam included. A ring rather than a list with two ends because a shell's cursor sits at the prompt, below everything it has printed, so a walk that could not come round would have nowhere to go on the very first press -- which is the case n/N were written for. One motion everywhere, no pane-kind or buffer-kind special case. The only thing a buffer may change is the GRAIN of what a step selects, and it does it with one flag rather than a branch: output_pane.Traits.commands (renamed from `executes`, which named one reader's behaviour rather than the fact) makes a row select WHOLE, because a ThemeSel line is a word to run and has no path inside it to pick out. `]d`/`[d` are not n/N -- they are helix's diagnostic motions, their job is to ARRIVE, and they still reach searchStep. THE TTY PROMPT. Leaving raw tty blanked the prompt row, and the command you had typed at that prompt shares the row, so it went too -- a shell out of tty read as output only. OSC 133 marks the row CELL by cell, so the two are separable: config.tty_blank = .prompt cuts the prompt's own columns and leaves the command, left-hugged at column 0 in line with the output under it rather than in a bay of blanks. .prompt_and_input is the old behaviour, kept. Because the row is now something you can put a cursor in, enterTty adds the hidden prompt width back before asking ghostty to walk the shell's own cursor to it -- the modal column on a cut row is short by exactly that much. Verified: unit-test 186/186 (nine new), snap 87/87 (new ttyprompt.snap), hxdiff 481 and hxparity 561 with 0 mismatches, tty and gui both build. And against the real binaries rather than the harness: in a pty, SPC y emits OSC 52 carrying exactly the selection while plain y emits nothing, SPC p issues the read and pastes the reply, and a bracketed paste of "dd..." inserts text instead of deleting two lines. In a real SDL window, SPC y then SPC p round trips through the system clipboard while the default register holds different text. Setting tty_blank back to .prompt_and_input reproduces all 86 old goldens byte for byte.

Esc alternates between the last two panes; Toggleterm is gone

2026-08-10T12:17:07Z

Esc ran Toggleterm, which hopped between the newest DOC and the newest TERMINAL. That distinction never earned its keep. It made Esc unpredictable — which of three panes you landed on depended on their kinds, not on where you had been — and it could not alternate between two files at all, which is the case you hit most. Editing two files, Esc did nothing. The replacement already existed. Last (SPC j j) is "the pane you were in before this one, whichever it was": it walks the jump stack for the newest entry naming a different pane and restores its line and column. So Esc, and Shift-Esc in tty, now run Last, and Toggleterm is deleted rather than renamed — a third implementation of "go to the other pane" was the thing to avoid. SPC w t goes with it; the w group is the four directional moves, and the jump group already had SPC j j. Held down, Esc alternates. Two files, a file and its shell, a file and a +Search — all the same, because Last has no notion of kind to get wrong. This depends on the swap in the same series: Last reads the stack backwards, and until hopping stopped appending, the pane you came from could fall off it. windownav.snap needed only its keys and prose changed — its golden did not move at all, which is the useful evidence here: for the one scenario the old builtin handled well, Last produces an identical focus sequence. Coverage for what it did not handle is new: a unit test opens a second FILE by looking its name and asserts Esc alternates between two panes of the SAME kind, which is the case that used to be a no-op. Docs follow: tutor.txt, docs/helix-keys.md, docs/design.typ, and the builtin index goldens, which are now one row shorter. 75/75 snapshots, both unit suites, and the macOS ABI build all pass.

boot a file argument alone

2026-08-10T12:17:07Z

focus history is a stack of locations, and the Jumplist is that same stack

2026-08-01T18:02:08Z

One container, not two: focus_hist (a stack of pane ids rebuilt every sync) is now jumps[] + a current pointer, and the +Jumps buffer is a RENDERING of that array — nothing copies it, nothing shadows it. prevFocus, Toggleterm, Look's directory order, Back/Forward, Last and Jumplist all walk the one list. A pane id is reused, so a location that only remembered an id would retarget after a respawn: panes now carry a monotonic serial and an entry whose slot holds a different serial is dead. trackJump compacts those out and fixes the pointer in the same pass. The push rule lives in ONE place and says: a location is worth remembering when you cannot see it any more — a different pane, or more than a bodyful of rows away in the same one. So hjkl never grows the list and 100G, a search hit and a goto-definition do. Ctrl-o/Ctrl-i walk it, SPC j j toggles the last two, SPC j l lists them. Ctrl-i IS Tab on a legacy host, where the binding simply never fires and Tab-executes is untouched; kitty reports them apart. SPC j o/i work anywhere. Two goldens moved, both the SPC ? Help listing gaining four rows.