summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README.md4
-rw-r--r--docs/helix-keys.md4
-rw-r--r--docs/typ/builtins-gui.json1
-rw-r--r--docs/typ/builtins-tty.json1
-rw-r--r--docs/typ/cheatsheet.typ4
-rw-r--r--docs/typ/guide.typ2
-rw-r--r--docs/typ/reference.typ3
-rw-r--r--src/CHANGELOG.md5
-rw-r--r--src/config.zig13
-rw-r--r--src/pardes.zig47
-rw-r--r--src/tutor.txt4
-rw-r--r--test/snapshots/builtins.golden4
-rw-r--r--test/snapshots/builtins.snap1
13 files changed, 74 insertions, 19 deletions
diff --git a/README.md b/README.md
index 0a03bdba..4ad49cc6 100644
--- a/README.md
+++ b/README.md
@@ -9,8 +9,8 @@ Get the source with `git clone https://git.sr.ht/~gbrls/pardes && cd pardes`
(also at https://git.0x4200.cafe/pardes). Install with Zig 0.17:
`zig build -Dplatform=tty --prefix ~/.local` for
`pardes` in a terminal, or `-Dplatform=gui` for the `pardes-gui` window.
-The terminal should report the mouse; Shift-Esc needs the kitty keyboard
-protocol, and images need kitty graphics (else they are drawn as PETSCII
+The terminal should report the mouse; Shift-Esc (the Esc a terminal
+pane's program gets) needs the kitty keyboard protocol, and images need kitty graphics (else they are drawn as PETSCII
glyphs). Run `pardes` or `pardes FILE`.
Read the [guide](docs/typ/guide.typ) (about 15 minutes), then try `Tutor`
diff --git a/docs/helix-keys.md b/docs/helix-keys.md
index ddbab93b..0b71f60b 100644
--- a/docs/helix-keys.md
+++ b/docs/helix-keys.md
@@ -107,7 +107,7 @@ language-backend queries, and the shell pipe.
| `gh` / `gl` | line start / line end (last char, not the newline) | | helix-verified |
| `Ctrl-d` / `Ctrl-u` | half page down/up, cursor follows | matches `page_cursor_half_down/up` | helix-verified |
| `Ctrl-f` | full page down | matches `page_down`; file panes only get `Ctrl-b` (see next row) | helix-verified |
-| `Ctrl-b` | file panes: full page up. Terminal panes: **toggle raw tty/editor mode** (`opts.tty_toggle`, configurable; `Shift-Esc` also enters). In raw tty Shift-Esc goes to the child | tty toggle is pardes-specific and wins on terminals; harness `pane:"tty"` cases avoid `Ctrl-b` | helix-verified (file) / pardes-specific (tty) |
+| `Ctrl-b` | file panes: full page up. Terminal panes: **toggle raw tty/editor mode** (`opts.tty_toggle`, configurable). In raw tty Esc runs `Last` and Shift-Esc goes to the child as a plain Esc (`ProgramEsc on` swaps them) | tty toggle is pardes-specific and wins on terminals; harness `pane:"tty"` cases avoid `Ctrl-b` | helix-verified (file) / pardes-specific (tty) |
| `PageUp` / `PageDown` | full page | matches helix `page_up`/`page_down` (view scroll + cursor snap to the scrolloff edge) | helix-verified |
| `zt` / `zz` / `zb` | scroll current line to top / center / bottom | matches `align_view_top/center/bottom` (helix harness pins scrolloff to pardes' 3) | helix-verified |
| `Z` | sticky view mode: the `z` keys stay armed after each until Esc, which only leaves the mode; other keys do nothing meanwhile | helix's sticky view node | helix-verified |
@@ -122,7 +122,7 @@ language-backend queries, and the shell pipe.
| `y` | yank each range's text into the register (`"<reg>` names one, else `"`), one value per range | line-yank vim-ism removed (phase 5); yank keeps selection AND cursor (helix). The system clipboard is `"+y` / `SPC y`, helix's own split: a `d` of one character never clobbers what the desktop holds | helix-verified |
| `u` / `U` | undo / redo | restores the pre-edit selection (helix); snapshot granularity, `Alt-u`/`Alt-U` are the same two: helix walks a history tree by time with them, and pardes's history is linear, so earlier and later ARE undo and redo | helix-verified |
| `p` (normal) | paste the register after each range: value i at range i, the last value repeated when there are fewer | helix `paste_impl`. `"+p` asks the system clipboard (`SPC p`); on a tty that read is OSC 52, which most terminals refuse: an honest no-op rather than a paste of the wrong text | helix-verified |
-| `Esc` (body normal) | clear a pending modal prefix / exit select mode, keeping the selection, then run `Last`: hop to the pane you were in before this one, whichever kind it was, exactly like `SPC j j` — so held down it alternates between two panes, two files as readily as a file and its shell. A PDF pane is the ONE exception: there Esc is the document's own cancel (drop the mouse selection and the search overlay, stay where you are reading) and `Shift-Esc` is the hop out, while raw tty only intercepts unmodified Esc at a detected shell prompt | Pardes-specific focus binding layered on helix's cleanup. A leader path, tag, topbar or search owns Esc while it is active; raw tty forwards it | pardes-specific (cleanup helix-verified) |
+| `Esc` (body normal) | clear a pending modal prefix / exit select mode, keeping the selection, then run `Last`: hop to the pane you were in before this one, whichever kind it was, exactly like `SPC j j` — so held down it alternates between two panes, two files as readily as a file and its shell. A PDF pane is the ONE exception: there Esc is the document's own cancel (drop the mouse selection and the search overlay, stay where you are reading) and `Shift-Esc` is the hop out, while raw tty takes unmodified Esc as `Last` and sends Shift-Esc to the program (with `ProgramEsc on`, Esc goes to the program except at a detected shell prompt) | Pardes-specific focus binding layered on helix's cleanup. A leader path, tag, topbar or search owns Esc while it is active; raw tty forwards it | pardes-specific (cleanup helix-verified) |
| `Esc` (insert) | back to normal mode, cursor right after the insertion (no vim left-step) | | helix-verified |
| `Enter` (normal) | acme **look** chord: EXPLICIT selection, else file-ish word under cursor | pardes-specific, keep (helix normal-mode Enter unbound). Covers helix `gf`. Implicit motion residue falls back to the cursor word | pardes-specific |
| `Tab` (normal) | acme **execute** chord | pardes-specific, keep; explicit-selection rule as Enter | pardes-specific |
diff --git a/docs/typ/builtins-gui.json b/docs/typ/builtins-gui.json
index f602ee92..851b8673 100644
--- a/docs/typ/builtins-gui.json
+++ b/docs/typ/builtins-gui.json
@@ -109,6 +109,7 @@
{"name": "Pet", "leader": null, "also": [], "arg": true, "scope": "root", "setting": false, "choices": null, "doc": "An optional SDL workspace-tag companion; never consumes input or text cells."},
{"name": "Petscii", "leader": "SPC t p", "also": [], "arg": true, "scope": "pane", "setting": false, "choices": null, "doc": "glyph art over the host's pixels: an image pane's picture, or the kitty graphics a terminal's program placed (yazi's previews)"},
{"name": "Placement", "leader": "SPC c p", "also": [], "arg": true, "scope": "root", "setting": true, "choices": "acme, pardes", "doc": "Where a new pane goes: acme, as makenewwindow does, or pardes, the older rules."},
+ {"name": "ProgramEsc", "leader": null, "also": [], "arg": true, "scope": "root", "setting": true, "choices": "on, off", "doc": "In a raw terminal, Esc goes to the program and Shift-Esc backs out, on; off (the default) swaps them."},
{"name": "Putall", "leader": null, "also": [], "arg": false, "scope": "root", "setting": false, "choices": null, "doc": "acme's Putall: every pane holding unsaved edits to a file is saved, each as its own Save; one that is refused (changed on disk since, a write that fails) says so and the rest are saved all the same."},
{"name": "Recent", "leader": "SPC f r", "also": [], "arg": false, "scope": "root", "setting": false, "choices": null, "doc": "List the files opened lately, closed ones too, each a place to open again."},
{"name": "Redo", "leader": null, "also": [], "arg": false, "scope": "pane", "setting": false, "choices": null, "doc": "Redo the last undone edit."},
diff --git a/docs/typ/builtins-tty.json b/docs/typ/builtins-tty.json
index e02f4201..e1276117 100644
--- a/docs/typ/builtins-tty.json
+++ b/docs/typ/builtins-tty.json
@@ -96,6 +96,7 @@
{"name": "PdfTint", "leader": "SPC t i", "also": [], "arg": true, "scope": "pane", "setting": false, "choices": null, "doc": "Tint the PDF page to the theme, or show it as printed, stepping through them (or to the one named, `disabled|filtered|full`)."},
{"name": "Petscii", "leader": "SPC t p", "also": [], "arg": true, "scope": "pane", "setting": false, "choices": null, "doc": "glyph art over the host's pixels: an image pane's picture, or the kitty graphics a terminal's program placed (yazi's previews)"},
{"name": "Placement", "leader": "SPC c p", "also": [], "arg": true, "scope": "root", "setting": true, "choices": "acme, pardes", "doc": "Where a new pane goes: acme, as makenewwindow does, or pardes, the older rules."},
+ {"name": "ProgramEsc", "leader": null, "also": [], "arg": true, "scope": "root", "setting": true, "choices": "on, off", "doc": "In a raw terminal, Esc goes to the program and Shift-Esc backs out, on; off (the default) swaps them."},
{"name": "Putall", "leader": null, "also": [], "arg": false, "scope": "root", "setting": false, "choices": null, "doc": "acme's Putall: every pane holding unsaved edits to a file is saved, each as its own Save; one that is refused (changed on disk since, a write that fails) says so and the rest are saved all the same."},
{"name": "Recent", "leader": "SPC f r", "also": [], "arg": false, "scope": "root", "setting": false, "choices": null, "doc": "List the files opened lately, closed ones too, each a place to open again."},
{"name": "Redo", "leader": null, "also": [], "arg": false, "scope": "pane", "setting": false, "choices": null, "doc": "Redo the last undone edit."},
diff --git a/docs/typ/cheatsheet.typ b/docs/typ/cheatsheet.typ
index d2df7e70..36bff0a7 100644
--- a/docs/typ/cheatsheet.typ
+++ b/docs/typ/cheatsheet.typ
@@ -72,8 +72,8 @@ Helix-style: motions *select*, then an edit acts on the selection. Mode box: bla
== Keys: panes
#pairs(
[#key("Ctrl-w") #keys("h", "j", "k", "l")], [then a direction: focus a neighbour (not in insert or raw `$`)],
- [#key("Esc")], [back to the previous pane (raw: only at a prompt with nothing typed; insert: to normal)],
- [#key("Shift-Esc")], [back to the previous pane from any mode, with the kitty keyboard protocol or in the GUI; elsewhere a plain Esc],
+ [#key("Esc")], [back to the previous pane (insert: to normal)],
+ [#key("Shift-Esc")], [back to the previous pane from any mode but raw, where it is the program's Esc; needs the kitty keyboard protocol or the GUI, elsewhere a plain Esc],
[#keys("Ctrl-o", "Ctrl-i")], [jump history back, forward; this file first],
[#key("Alt-n")], [new terminal below],
[#key("Alt-c")], [move the pane to a new column],
diff --git a/docs/typ/guide.typ b/docs/typ/guide.typ
index 7058592f..93bc653a 100644
--- a/docs/typ/guide.typ
+++ b/docs/typ/guide.typ
@@ -42,7 +42,7 @@ steps raw, normal, insert.
#pairs(
[#mode-box(" ") normal], [#key("Esc"): back to the previous pane (#word("Last")), unlike helix. #key("Shift-Esc"): the same.],
[#mode-box("^") insert], [#key("Esc"): back to normal. #key("Shift-Esc"): out of insert and back to the previous pane.],
- [#mode-box("$") raw], [#key("Esc"): to the program, except at a shell prompt with nothing typed on it, where it goes back to the previous pane. #key("Shift-Esc"): always back. Either way the terminal stays raw.],
+ [#mode-box("$") raw], [#key("Esc"): back to the previous pane. #key("Shift-Esc"): an Esc to the program. Either way the terminal stays raw. #word("ProgramEsc") `on` swaps them back: #key("Esc") goes to the program, except at a shell prompt with nothing typed on it, and #key("Shift-Esc") always goes back.],
[a PDF], [#key("Esc"): clears the selection and the search highlights. #key("Shift-Esc"): back to the previous pane.],
)
diff --git a/docs/typ/reference.typ b/docs/typ/reference.typ
index 05176951..455d2645 100644
--- a/docs/typ/reference.typ
+++ b/docs/typ/reference.typ
@@ -415,6 +415,7 @@ word clicked in a tag does. The same lines go in the startup file
[#word("MessageAnimation")], [on: messages ease in and dissolve],
[#word("MessageLinger"), #word("MessageFall"), #word("MessageDissolve")], [800, 180, 150 milliseconds, at most 60000],
[#word("PagerColor")], [on: the next paged text keeps its colours],
+ [#word("ProgramEsc")], [off: in a raw terminal #key("Esc") goes back a pane and #key("Shift-Esc") is the program's Esc; on swaps them, and #key("Esc") goes back only at an empty shell prompt],
[#word("Pager") `pardes|off`], [`pardes`: what a terminal's commands page through, `pardes -`; `off` leaves `PAGER`, `GIT_PAGER` and `SYSTEMD_PAGER` as the environment has them (#doc("fs", section: "pardes-stdin")). It applies to terminals started after it],
[#word("Placement") `acme|pardes`], [`acme`: where new panes go (#doc("fs", section: "placement"))],
[#word("BootShell") `keep|replace`], [`keep`; `replace` closes the untouched lone shell a dragged document lands beside],
@@ -969,7 +970,7 @@ it was.
= On screen <on-screen>
-- *Esc at a prompt.* pardes knows a shell prompt with nothing typed on it
+- *Esc at a prompt* (with #word("ProgramEsc") on). pardes knows a shell prompt with nothing typed on it
from the OSC 133 marks it injects into bash and fish (marks a shell sends
itself do not count); for other shells, from no program holding the
terminal, typed text or not.
diff --git a/src/CHANGELOG.md b/src/CHANGELOG.md
index 362aaf5b..76a1fd56 100644
--- a/src/CHANGELOG.md
+++ b/src/CHANGELOG.md
@@ -24,6 +24,11 @@
scroll as it glides, instead of jumping a row of the track at a time.
- A click in another pane glides the cursor once, straight to where it
was clicked, no longer first to that pane's old cursor.
+- Esc in a raw terminal goes back to the previous pane, as it does from
+ normal mode; Shift-Esc sends the program its Esc. `ProgramEsc on`
+ restores the old way round. A terminal without the kitty keyboard
+ protocol sends Shift-Esc as a plain Esc, so under one a program gets
+ no Esc unless ProgramEsc is on.
- Built with Zig 0.17. A bare `zig build` still puts the binaries in
`~/.local/bin`, now as a copy beside the prefix, which `--prefix` no
diff --git a/src/config.zig b/src/config.zig
index 8166954d..f3cc0948 100644
--- a/src/config.zig
+++ b/src/config.zig
@@ -153,6 +153,7 @@ pub const leader_path = paths: {
table.set(.JumpTrail, null);
table.set(.ChipShadow, null);
table.set(.ThumbFlash, null);
+ table.set(.ProgramEsc, null);
if (builtins.capabilities.lift) table.set(.Lift, null);
table.set(.Motion, null);
table.set(.InactiveDim, null);
@@ -283,8 +284,9 @@ pub const jump_keys = [_]struct { chord: Chord, cmd: Builtin }{
};
/// Shift-Esc: the Esc nothing swallows. In every mode and pane it does what
-/// Esc does from normal mode, back to the previous pane (Last); a raw
-/// terminal's program never sees it. Ctrl-b alone toggles raw.
+/// Esc does from normal mode, back to the previous pane (Last); in a raw
+/// terminal plain Esc does it and Shift-Esc is the program's Esc, unless
+/// ProgramEsc is on. Ctrl-b alone toggles raw.
pub const back_out: []const Chord = &.{.{ .cp = Key.escape, .shift = true }};
pub const tty_toggle_default: u21 = 'b';
@@ -764,6 +766,9 @@ pub const Runtime = struct {
/// T7: in a terminal, a pane's scroll thumb brightens as it scrolls and
/// fades back (truecolor terminals).
thumb_flash: bool = false,
+ /// In a raw terminal, Esc goes to the program and Shift-Esc backs out
+ /// (off, the default: Esc backs out and Shift-Esc is the program's).
+ program_esc: bool = false,
/// How long a message stays after the key or click that dismisses it.
message_linger_ms: u16 = 800,
/// How long its fall into the row takes, easing out (§8.1: arriving,
@@ -1022,7 +1027,7 @@ pub const Runtime = struct {
/// The message timings a setting word sets, each in milliseconds.
pub const MessageTime = enum { linger, fall, dissolve };
- pub const Toggle = enum { colors, wrap, tree_context_tag_style, tag_bottom, debug, focus_tint, syntax_bold, pager_color, verbose, message_animation, ligatures, cursor_blink, selection_glow, hover_glow, occlusion, parallax, jump_trail, chip_shadow, thumb_flash };
+ pub const Toggle = enum { colors, wrap, tree_context_tag_style, tag_bottom, debug, focus_tint, syntax_bold, pager_color, verbose, message_animation, ligatures, cursor_blink, selection_glow, hover_glow, occlusion, parallax, jump_trail, chip_shadow, thumb_flash, program_esc };
/// A bundled post pass, a Shadertoy file in shaders/post/: the CRT, and
/// G4's bloom, vignette and grain (docs/effects.md).
pub const Scene = enum { crt, bloom, vignette, grain };
@@ -1090,6 +1095,7 @@ pub const Runtime = struct {
.{ .word = "JumpTrail", .action = .{ .toggle = .jump_trail }, .doc = "In a terminal, a jump of the cursor leaves a short trail that fades, on or off." },
.{ .word = "ChipShadow", .action = .{ .toggle = .chip_shadow }, .doc = "In a terminal, a notice chip casts a cell's shadow right and down, on or off." },
.{ .word = "ThumbFlash", .action = .{ .toggle = .thumb_flash }, .doc = "In a terminal, a pane's scroll thumb brightens as it scrolls and fades back, on or off." },
+ .{ .word = "ProgramEsc", .action = .{ .toggle = .program_esc }, .doc = "In a raw terminal, Esc goes to the program and Shift-Esc backs out, on; off (the default) swaps them." },
.{ .word = "Lift", .action = .lift, .availability = .lift, .doc = "How the focused pane stands off the page: off, shadow, rim or auto." },
.{ .word = "Motion", .action = .motion, .doc = "How animations move: off, crisp, smooth, bouncy or playful." },
.{ .word = "InactiveDim", .action = .inactive_dim, .doc = "Fade the unfocused panes' text by a percentage, 0 through 100, 0 off." },
@@ -1876,6 +1882,7 @@ pub const Runtime = struct {
.jump_trail => "JumpTrail on\n",
.chip_shadow => "ChipShadow on\n",
.thumb_flash => "ThumbFlash on\n",
+ .program_esc => "ProgramEsc on\n",
},
.shell => "Shell fish\n",
.tagline_size => "TaglineSize 73\n",
diff --git a/src/pardes.zig b/src/pardes.zig
index 72470490..c885acc2 100644
--- a/src/pardes.zig
+++ b/src/pardes.zig
@@ -6374,10 +6374,23 @@ pub const Pardes = struct {
}
const pane = p.panes[p.active] orelse return;
p.noteTyped();
+ // In a raw terminal the two Escs swap unless ProgramEsc is on: Esc
+ // backs out, and Shift-Esc is the program's, sent as a plain Esc.
+ const raw_esc = key.cp == Key.escape and !key.ctrl and !key.alt and !p.settings.program_esc and
+ pane.isTerminal() and pane.body.mode == .tty and pane.focus == .body and pane.prompt == .none and
+ tagline.focusedHeader(p) == null;
+ if (raw_esc and key.shift) {
+ p.leader_on = false;
+ p.ctrl_w_pending = false;
+ panes.terminal.followOutput(pane);
+ var plain = key;
+ plain.shift = false;
+ return panes.terminal.forwardKey(p, p.active, plain);
+ }
// Shift-Esc backs out of whatever the pane is in -- a prompt, insert
// mode, a pending count, a raw program -- to the previous pane, as
// Esc does from normal mode. Nothing under it sees the key.
- if (hit(key, config.back_out)) {
+ if (raw_esc or hit(key, config.back_out)) {
p.leader_on = false;
p.ctrl_w_pending = false;
if (pane.prompt != .none) {
@@ -6405,8 +6418,8 @@ pub const Pardes = struct {
p.ctrl_w_pending = false;
if (key.ctrl and !key.alt and key.cp == p.opts.tty_toggle)
return p.toggleTty(p.active);
- // Bare Escape leaves only at a shell prompt (Shift-Esc, above,
- // always).
+ // With ProgramEsc on, bare Escape leaves only at a shell prompt
+ // (Shift-Esc, above, always).
if (key.cp == Key.escape and !key.ctrl and !key.alt and !key.shift and exec.takesCommandLine(p, p.active))
return exec.runBuiltin(p, .Last, p.active, "", null);
panes.terminal.followOutput(pane); // typing snaps back to live output
@@ -8442,10 +8455,36 @@ test "Esc back into a file leaves its view where it was" {
try std.testing.expectEqual(@as(usize, @intCast(row)) -| @as(usize, dp.rows) / 2, dp.file.?.scroll);
}
-test "raw tty Escape only leaves at a shell prompt" {
+test "raw tty Esc backs out and Shift-Esc is the program's Esc" {
+ if (platform == .web) return;
+ const p = try Pardes.init(std.testing.allocator, .{ .cols = 80, .rows = 24, .file = "mise.toml" });
+ defer p.deinit();
+ _ = exec.spawnTty(p, 0);
+ const shell = p.active;
+ const pane = p.panes[shell].?;
+ var buf: [256]u8 = undefined;
+ _ = drainWrites(p, &buf);
+
+ p.update(.{ .key = .{ .cp = 'x', .text = "x" } });
+ _ = drainWrites(p, &buf);
+ p.update(.{ .key = .{ .cp = Key.escape } }); // past typed text too
+ try std.testing.expectEqual(@as(usize, 0), p.active);
+ try std.testing.expectEqualStrings("", drainWrites(p, &buf));
+ try std.testing.expectEqual(Text.Mode.tty, pane.body.mode);
+
+ p.update(.{ .key = .{ .cp = Key.escape } }); // back into the shell
+ try std.testing.expectEqual(shell, p.active);
+ _ = drainWrites(p, &buf);
+ p.update(.{ .key = .{ .cp = Key.escape, .shift = true } });
+ try std.testing.expectEqual(shell, p.active);
+ try std.testing.expectEqualStrings("\x1b", drainWrites(p, &buf));
+}
+
+test "with ProgramEsc raw tty Escape only leaves at a shell prompt" {
if (platform == .web) return;
const p = try Pardes.init(std.testing.allocator, .{ .cols = 80, .rows = 24, .file = "mise.toml" });
defer p.deinit();
+ p.settings.program_esc = true;
_ = exec.spawnTty(p, 0);
const shell = p.active;
const pane = p.panes[shell].?;
diff --git a/src/tutor.txt b/src/tutor.txt
index 8f5cf241..5df02f1a 100644
--- a/src/tutor.txt
+++ b/src/tutor.txt
@@ -29,8 +29,8 @@
pane you were in before (not what helix does). Come back with
Esc again.
3. Press Alt-n: a terminal opens, in NORMAL mode. Press Ctrl-b: its
- box shows $ (RAW), and keys go to the shell. At its empty prompt,
- Esc brings you back here; the terminal stays $.
+ box shows $ (RAW), and keys go to the shell. Esc brings you back
+ here; the terminal stays $. Shift-Esc sends the shell an Esc.
-> Guide: Modes
diff --git a/test/snapshots/builtins.golden b/test/snapshots/builtins.golden
index b9d5c5b2..9eb9718b 100644
--- a/test/snapshots/builtins.golden
+++ b/test/snapshots/builtins.golden
@@ -59,8 +59,8 @@
|44: 29 pane you were in before (not what helix does). Come back with
|45: 30 Esc again.
|46: 31 3. Press Alt-n: a terminal opens, in NORMAL mode. Press Ctrl-b: its
-|47: 32 box shows $ (RAW), and keys go to the shell. At its empty prompt,
-|48: 33 Esc brings you back here; the terminal stays $.
+|47: 32 box shows $ (RAW), and keys go to the shell. Esc brings you back
+|48: 33 here; the terminal stays $. Shift-Esc sends the shell an Esc.
|49: 34
|50: 35 -> Guide: Modes
|51: 36
diff --git a/test/snapshots/builtins.snap b/test/snapshots/builtins.snap
index fc0ab796..c59b79d6 100644
--- a/test/snapshots/builtins.snap
+++ b/test/snapshots/builtins.snap
@@ -32,6 +32,7 @@ wheel up 110 50
wheel up 110 50
wheel up 110 50
wheel up 110 50
+wheel up 110 50
wait 10000 Look enter, right-click
wait 10000 Exec tab, middle-click
wait 10000 Filter