summaryrefslogtreecommitdiff
path: root/.agents
Commit message (Collapse)AuthorAge
* The docs: sam gotchas, Restore's log order and paths, stream reads, layout's ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | | current and active Round 13's doc findings: a sam gotchas box in the skill ($-1 with and without a final newline, N+1 at the end, ^/$ at the end, 2,1, y's leading empty piece, c's literal &, columns from 1); the skill's Restore log order made the true one (new, restore, restored, restoredcol); a relative Restore path is looked for in DumpDir then the session's directory, and a bare one takes the last dump; a follower sees each (xN) as a new line; reading data or xdata moves addr; a second read of look/exec on one fd is EOF (re-open or seek 0); /layout's current (the keyboard's column) and active (acme's activecol) defined; no room, not no rows left; why a scratch's dirty blocks nothing under 100 bytes; the changed record listed. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs say what Restore renumbers and re-runs, what Tty takes, and how a ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | range reaches a REPL Round 12's doc findings: the README's ctl line gains Restore, Placement and size (still 45 lines, detail in fs.md); Tty's argument is a shell and Tty on a pane's ctl opens a new pane; a .py pane's range goes to its REPL as an MX<q0> <q1> event write-back; after a Restore panes are renumbered (columns count from 1 again, so often keep theirs), a command pane shows exit ? and does not re-run, and REPL bindings are gone. acme's p adds no newline to what it prints (ecmd.c:744, pdisplay), so pardes's p does not either. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs give the full-column refusal, an Edit block left open at close, and ↵Gabriel Schneider8 days
| | | | | | | | | | | | byte columns Round 11's doc findings: the skill names the full-column refusal beside the 64-pane cap; fs.md and the skill say an Edit block still open when its open closes fails with unmatched { and an err; and line:col's byte columns get the tip for character columns from tools (the same on ASCII, else a search or #n). A unit test pins the unmatched { at close. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A detached session with no frontend takes its size from the root ctlGabriel Schneider8 days
| | | | | | | | | | A --detach session nobody is attached to stayed 80x24, too small for an agent's panes, and nothing could change it. The root ctl takes size <cols> <rows> while no frontend is attached (refused while one owns the size), and a client that attaches later still sets its own (the server compares with the core's size). Documented with the 80x24 default. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs say sel is writable, Edit blocks may span writes, and sig INT stops ↵Gabriel Schneider8 days
| | | | | | | | | | | | a REPL sel's write was documented in fs.md only; the skill says it now. With command lines held per open, an Edit block may come in several writes (a shell's line-at-a-time printf), so the heredoc advice goes. Kill never stopped what a REPL runs, since pardes did not start it; the docs point at pty/ctl sig INT. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The default Shell is $SHELL, else /bin/shGabriel Schneider8 days
| | | | | | | | | | With no Shell set, pardes ran fish, which a box may not have and a user may not use. The default is now the user's login shell ($SHELL), else /bin/sh; an explicit Shell still overrides it. The tests pin their own shell (snapshots bash, the python suites /bin/sh or bash) and pass with SHELL unset; the Config report and docs say where the default comes from. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A read on a closed pane's event ends ENOENT, and the pane cap is ENOSPCGabriel Schneider8 days
| | | | | | | | | | 9ns reads an error's words, not its errno: "window shut down" came out as EIO where every other file of a gone pane gives ENOENT, and "no pane slots" as EIO. The event and pty/data reads a pane closed under now say "no such pane: its window shut" (ENOENT), and the cap says "no space for a pane: 64 max" (ENOSPC; 9ns has no word for ENFILE). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Undo and Redo with nothing left say so, and the write succeedsGabriel Schneider8 days
| | | | | | | | | A pane's Undo or Redo with no step left did nothing and said nothing. It now says "Undo: nothing to undo" (or Redo's) as a message, not a failure, so a ctl write of it still succeeds as acme's silent Undo does. The docs give the 256-step history. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* addr reads empty after a failed address instead of failingGabriel Schneider8 days
| | | | | | | | With no address after a failed write, a read of addr itself failed (EIO through a mount), which reads as a broken file rather than as no address. It now reads empty, as an unset limit does; data and xdata still refuse. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Addresses snap to runes, not grapheme clustersGabriel Schneider8 days
| | | | | | | | | | sam and acme address runes; pardes snapped #n, line:col, dot and data's reads to grapheme clusters, so a lone combining mark or a CRLF's \r could not be addressed. #n, line:col, a search's match, dot (both ways) and data now land on rune boundaries (modal.runeStart and friends), and the tty's cell drawing is untouched. The README, fs.md and the skill say so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A command line cut across writes runs once whole, and look/exec answer per openGabriel Schneider8 days
| | | | | | | | | | | | | | | | A mount cuts a write at its message size, and each piece ran on its own: a line cut at the boundary ran as shell commands and a 50 KB Edit block broke. An open of look, exec, tagexec, any ctl or a column's exec now keeps an unfinished last line, or an Edit block still open, until its next write or its release, and never runs a fragment. The same open record holds what its last write touched, which a read on it answers (as /net/tcp/clone does); an open that never wrote reads the session's last as of its open. A release that runs a held line waits for quiet and counts as a change; a clicked line with a control character is still refused at its write. Tested in unit tests, fs.py (python client, 8 KiB) and selfmount.py (the kernel mount, a 1000-line seq burst and a 50 KB Edit block). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs say the errno that fits, Joincol's order, the pane cap, the paste's ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | second Enter, a follower across Restore, and why wc waits Dogfood round 9's doc findings: ENOENT for a missing pane, file or dump is right, so the skill says EIO or an errno that fits; Joincol folds into the column on the right, the joined panes below its own; the skill gives the 64-pane cap; Python's second \r is needed only when the paste lacks a trailing newline; a log follower loses nothing within a session, but a Restore hangs it up; and a tag word gets no file argument, as in acme, so bare wc waits on stdin (pardes has no $%). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The workspace tag has /tagexec, every exec file reads back what it touched, ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | and a tag's words log as the session's /tagexec runs a word as a click in the workspace tag, as col/<serial>/exec does in a column's. A column's exec was write-only; it and /tagexec now read back the serials the last write touched, as /exec does. A click in a tag no longer goes to the focused pane's event reader, and what a word run from a column's ctl or exec or /tagexec says is logged msg -, not against the focused pane. The README, fs.md and the skill say so, and document the answer record. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Kill stops a command pane's whole command, its & jobs includedGabriel Schneider8 days
| | | | | | | | | | With job control on, a command's & jobs get process groups of their own, so Kill's signal to the foreground group and the shell's group left them running, orphaned. A stop of a command pane now signals every process group in its shell's session (Linux; a /proc scan). Jobs still outlive a command that exits on its own. Docs and the skill say it per route. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A column has a ctl, an exec and an rmdir over 9P, and Restore maps its serialGabriel Schneider8 days
| | | | | | | | | | | | | | A script could read and write a column's tag but not act on the column. col/<serial>/ctl takes Delcol, Joincol, New and Tty, each acting on that column as from its tag; col/<serial>/exec runs a word as a middle click in the tag; rmdir col/<serial> closes an empty column and refuses one with panes (ENOTEMPTY, an err record saying why). The root ctl's refusal of Delcol and Joincol points at col/<serial>/ctl. A dump keeps each column's serial and Restore logs restoredcol <old> <new>; the dump golden gains them. Documented: Joincol's survivor, the column on the right, keeps its serial and tag. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Columns are named by stable serials over 9P, as panes areGabriel Schneider8 days
| | | | | | | | | | | /col/<n> named a column by its index, which shifts when a column left of it closes: exactly what scripts trip on. A column is now /col/<serial>, its serial kept while it lives and never reused; /layout lines give serial and index (`<serial> <index> ...`), active names the serial, /index's last field is the column's serial, and the log says newcol and delcol with serials. Docs, the skill and the tree's README say so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The tree serves the layout: /layout, /tag and /col/<n>/tagGabriel Schneider8 days
| | | | | | | | | | | | | A script could not see where the panes sit or edit the tags a person clicks in. /layout lists each column, its index, x and width in cells, current or not, empty or full, and its panes' serials, then the active column; /tag is the workspace tag and /col/<n>/tag a column's, read and written as a pane tag is (one line: a newline written in is a space, and a truncating write drops the one ending it); /index's lines end with the pane's column; the log says newcol <n> and delcol <n>. acme serves no column files, and the docs say so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Docs answer round 7's questionsGabriel Schneider8 days
| | | | | | | | | The grip's two terminal cells (the mode, then * for unsaved text), a new terminal's new N / then rename and the ls it runs at its first prompt, the tag offsets an x record carries, Del k and Del j, each builtin's msg in the log and its serial, and m=$NINE_MOUNT under 9ns --unix in the skill. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A send to Python's REPL runs once, the Enter after the paste, not in itGabriel Schneider8 days
| | | | | | | | | | | | A one-line send (print(1)) to Python 3.14 stopped at ... and needed another Enter: its REPL takes a bracketed paste, and an Enter read in the same read as the paste is part of the paste, one line or not (checked in a real pty). Into a REPL that asked for bracketed paste, the Enters (two for an open block) now wait for its next output, its answer to the paste, or 250 ms with nothing. fs-test runs python3 in a real pty and checks a one-line exec prints at once; the docs' pty/data recipe says to send the Enter apart. Co-Authored-By: Claude Opus 5.5 <[email protected]>
*-. Merge: 9P round 6 + empty columns + render (acme theme, grips, Lift, Motion)Gabriel Schneider8 days
|\ \
| * | A column can be empty, as acme's can; new panes go where acme's ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | makenewwindow puts them Newcol makes an empty column; closing a column's last pane leaves it empty with the keyboard on its tag; Delcol and Joincol alone take a column away; the session's last pane closing quits. The +New stand-in and replaceStillborn / stillborn_joiner are gone. Every new pane goes through exec.placeNew, which follows acme's makenewwindow (active column, empty column whole, blank space, halving the biggest) or, with Placement pardes, the old rules. ColumnTags is gone: column tags are always shown. A grip drag shows acme's box cursor. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | A pane's question is logged as ask, and answer on its ctl answers itGabriel Schneider8 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A script could not answer the several-REPLs question, which only a key could. Every question a pane asks on its notice band (which REPL takes an exec, Del's side from the keyboard) is now logged as `ask <serial> <what> <choices>`, and `answer <choice>` on the pane's ctl answers it as that key would, `answer -` taking it back as Esc does. One function answers for a key and for the ctl. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | A Python block sent to a REPL gets the second Enter that ends itGabriel Schneider8 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A dogfood agent's `def` sent to python3 sat open at the continuation prompt: a block whose last line is indented is not over at one Enter, pasted into 3.13's REPL or typed into the old one (checked against python 3.14 in a real pty, both ways). A send to a Python REPL now adds that second Enter, and the pty/data recipe in the docs and the 9P skill says to. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | pty/status reads the pty's size as winsize set it, on a line of its ownGabriel Schneider8 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A dogfood agent wrote winsize 100 30 to pty/ctl and pty/status went on reporting the pane's grid, and the status line had no newline to end it. The size winsize sets is kept until the pane resizes and gives the pty its grid again; ctl's winsize read back and status both report it, and status ends with a newline. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | A look with a blank in its pattern addresses, file:N selects the line, and a ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | | | | | | | | | miss is said, logged and reads back empty Round 6: look calc.py:/return a/ was a word search, since a blank ended the address; calc.py:99 past the end focused the file and said nothing; and /look still read back the pane before a miss. A pattern after the colon may now hold blanks; file:N selects the line, newline included, as acme's does; a line past the end opens and focuses nothing; and every miss (no match, a bad address, a line past the end) says so, logs err <serial> look: why, keeps the selection, and leaves look reading back empty. Documented, with file:0/re/ for the first match, since acme evaluates the address from the file's dot. Five goldens change: a look at file:N now selects the line. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | A write of an Edit block reaches Edit whole, on a pane's ctl, the root's and ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | | | | | | | | | exec Every write was split into lines, so a { group or an a/c/i text block written to ctl or exec became lines of their own: i/.../ and } ran as shell command panes that exited 127. An Edit line now takes the lines after it while its group is open or its text block waits for its . line (sam_edit.needsMore, asking sam's parser), on all three; the root ctl takes Edit at the active pane. s/re/text/N counts as sN/re/text/ does. The docs and the skill show a block written by heredoc or env printf, since bash's printf writes line by line, and take round 5's doc list: get refusing once, the (xN) on a repeated err, limit bounding only a forward search's end, line:col's clamping, and $NINE_MOUNT under 9ns --unix. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | ^ in a pattern with \n matches at every line start, and a ^ or $ that cannot ↵Gabriel Schneider8 days
|/ / | | | | | | | | | | | | | | work is refused A pattern naming a newline runs over the whole text, where mvzr's ^ is only the text's start: /^def .*\n/ from #0 failed, and Edit ,x/^def .*\n/.../ silently did nothing. A leading ^ is now tried at each line start from the search's own; $ just before \n is dropped, as it changes nothing; any other ^ or $ in such a pattern is refused with why, since mvzr would read it as the text's ends. ^ inside an alternation holds only where a search starts, an mvzr limit, documented. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Edit runs sam's command language on a pane's body, as acme's Edit does, in ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | one undo step Over 9P a rename everywhere was a loop of addr and data writes. Edit, from a tag, a pane ctl or exec, parses sam's commands as acme's edit.c does and runs them as ecmd.c does against the text as it was, collecting the changes in order as elog.c logs them and applying them at once: addresses (the addr file's, line:col included), x y g v c a i d s p = m t, u alone, and { }. One undo step; any error, in acme's words, changes nothing, fails a ctl write and is logged. p and = print to the directory's +Errors. Left out, and said: the file commands, the pipes, \1-\9 (mvzr keeps no submatches), and changes out of sequence, which acme applies with a warning. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | addr takes line:col, as Look's file:12:5 doesGabriel Schneider8 days
| | | | | | | | | | | | A script that knows a line and column had to count bytes to write #n. `12:5` is now the point at line 12, column 5 (bytes from 1, clamped to the line's end and snapped to a character's start, as Look's cursor is), and it composes like any simple address. A pardes extension, documented as one; sam reads it as a syntax error. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | The docs say how a --detach=NAME session is posted, what > does to tag, ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | where #n inside a character lands, and what tag click offsets count; a refusal says which ctl takes the word, and a lock refusal who holds it Dogfood round 4's doc list: the recipe assumed pardes/<pid>; the README said tag writes append, though > replaces the editable text; #n inside a multibyte rune or grapheme snaps to its start, unsaid; a tag click's offsets count the path. A word written to the other ctl now says write it to pane/<n>/ctl or /ctl, and a held lock says another open of that ctl holds it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A followed log, event or pty/data answers a read inside its last answer from ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | it again, so bash's read loses nothing bash's read on a seekable fd takes a chunk, keeps one line and lseeks back to just past it; a stream had already moved on, so the rest of the chunk was lost and a while-read loop over the log dropped records. Each stream open keeps its last answer and the offset it was read at, and a read strictly inside it is answered from it; a read at the same offset, as a client that ignores offsets makes, still gets the next record. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A shell's > on addr no longer resets it, so echo /re/ > addr searches onGabriel Schneider8 days
| | | | | | | | | | | | Truncating addr reset it to #0, so a shell's find-and-replace loop matched the first hit for ever, .+#1 read 1 1 each time, and foo x foo y foo became foobarbarbar... acme resets addr on the first open (xfid.c:105-108), for clients that hold the fid; a shell cannot. Here neither an open nor a truncation resets it: the address written is evaluated from the last one, and 0 or , starts over. Documented as a departure from acme. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Sixteen 9P connections, and the next one is told there is no room instead of ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | being reset Four slots ran out under scripts plus a mount, and the fifth client was closed without a word, which through a mount looks exactly like a dead session. pardes now serves sixteen, and builds against cloud9 09b77cf, whose runner answers the Tversion of a client it cannot seat with an Rerror "too many connections" and tells pardes, which logs `err - 9p: too many connections`. QUIC keeps its own sixteen and still just closes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | An Exit or Restore refused over a ctl write names every unsaved pane, not ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | just the first Each pane got its own message, but a ctl write fails with its first error only, so a script was told about one pane, and the next Exit discarded both. The refusal now lists them all, as acme's rowclean does, and says the next one discards them all. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A look takes acme's file:addr and :addr, and one that finds nothing changes ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | nothing A look at `file:/re/` or `:/re/` searched for the words instead of addressing, and a miss left an empty +Search pane and a cleared selection, while a hit answered the +Search pane on /look. Now an address after a colon (acme look.c:450) is evaluated in the file from its dot; a miss says no match and leaves the panes and the selection alone; a hit reads back as the pane the text is selected in. Both live in lookAt's one flow, so they are one change. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | pardes builds against cloud9 2a7137c, whose 9ns reads a reply that came in ↵Gabriel Schneider8 days
|/ | | | | | | | before a hang-up 9ns failed every waiting call as soon as one send met a closed socket, so an answer the server sent just before hanging up could be lost: the Restore write's, when pardes cuts its connections. The docs no longer say the Restore write usually fails through a mount; only an older 9ns could, and the log stays the authority. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs say which shell a command runs in, what Kill's word matches, where ↵Gabriel Schneider8 days
| | | | | | | | dumps go and in what time, and how to send code to a REPL Dogfood found the docs saying $SHELL -c where commands run the root ctl's Shell, the README's log line missing run, exit, send, dump and restore, Kill's argument unexplained, and nothing on Repl - and bare Repl, on bracketed paste for multi-line code over pty/data, or on the UTC dump time. The Restore write's ECONNRESET through a mount is documented rather than fixed: pardes sends the answer before the hang-up, and 9ns drops it when its next send fails first. The REPL decision is recorded with the others, and the fs guide says a builtin's word still runs first. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A click written back to event is done as the click, REPL and all; a REPL's ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | ctl line names it Writing an M record back from a .py body with a REPL bound ran the text as a shell command (exit 127), where the click itself went to the REPL. acme does what the click would have done (xfideventwrite, xfid.c:842-844), so a body X record written back now goes the way a middle click goes: to a bound REPL, bracketed or line by line, the several-REPLs question included. An F record, a line written to exec, was never a click and still runs as a command. For a readable list of bindings, the smallest place: a bound terminal's ctl line ends with its id after current/notcurrent. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The log's run record carries the whole command line, after the new record of ↵Gabriel Schneider8 days
| | | | | | | | | | | its pane run logged the line's first word only, and before the new record of the pane it ran in, since panes are announced at the end of a step. It now carries the whole line as msg carries its text (control characters, newlines too, as spaces), and announces the new pane first. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The 9P docs find the mount through $NINE_MOUNT, and then the editor is just ↵Gabriel Schneider8 days
| | | | files
* A terminal bound as a language's REPL takes the execs made on that ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | | | | | | | language's files Repl python in a terminal's tag or on its ctl binds it (Repl - unbinds, Repl bare says the binding, the same word again changes nothing), with an id, python-a, python-b, in its tag. An exec made by a gesture on the body of a file in that language -- a middle click or the execute key, on any text, a single word too -- or on the REPL's own body is typed into it, bracketed if its program asked for that, else line by line with a once-said warning for Python's blank lines, then Enter; the message row says -> python-a in the tag's name tint, the log send <from> <to> <id>. Several bound for the language: the pane asks which on its notice band, as Del asks, one key answering, Esc none, nothing remembered. The gesture is known where it is dispatched (mouse.zig, the execute key), so the tag's words, Exec <text> run by name and a command word @`cmd` stay commands, and a 9P exec is never sent. A finished command pane is no REPL; bindings are not dumped. The docs spell out the escapes, the pdb and input() caveat and the no-bracketed-paste papercut. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A command line runs as its own command pane unless it is clicked at a ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | | | | | | | | shell's prompt A middle click, an exec write or a tag word that no builtin knows was typed into some terminal for the pane's directory, sharing whatever state that shell was in and answering nothing, so a misspelling vanished into a shell. Now only a line clicked at an interactive terminal's prompt is typed there. From anywhere else it runs as a command pane: a terminal whose child is $SHELL -c the line in the pane's directory, full emulation, which shows its output and then exit N from the host's reaping of the child, and stays. A finished command pane is the next command's for its directory, which runs below what it showed after a '% line' line (acme appends to +Errors and never clears it, util.c:213); a running one gets a second pane. Kill ends a command pane's whole process group, the log records run and exit, exec reads back the command pane's serial, and a line is at most 1 KB, read off the pane as the host forks rather than carried in every spawn effect. ttyForDir's search for a free shell is gone. The goldens of chordcut, cmdword and layout-open change where a file's exec now opens a command pane, and ttytaken is rewritten to exec from the terminal itself; docs/open-questions.md records the decision. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The root exec is a click at the keyboard's pane, and goes to its event ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | reader too A line written to the root's look or exec is a click at the pane with the keyboard, and in acme every click on a window whose event file is open goes to its reader; the root's acted at once. It now goes to the reader as the pane's own does. The docs say what that means for a helper holding event (its own exec comes back as a record: run it through ctl, or write the record back), and why an event record counts bytes where acme counts runes: every offset pardes serves is in bytes, #n and q0/q1 too, so the count follows them rather than switch alone, and an acme library reads it right for ASCII text. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* docs: the log's restore record, not the Restore write's answer, says a ↵Gabriel Schneider8 days
| | | | | | | | | | Restore happened The answer gets 200 ms to leave before the connections are cut, so a slow client may see only the cut; the new log's 'restore <path>' record is what to trust. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* docs: what dogfooding asked of the second roundGabriel Schneider8 days
| | | | | | | | | | | | The served README, the skill and docs/fs.md now say where an address search starts, that an event record's text may hold newlines and is read by its count, that truncating tag clears its default words too (append to keep them, u in the tag to get them back), how Dump and Restore behave and where dumps go, that Kill stops only the foreground job (the rest of 'sleep 30; echo done' still runs) and that Joincol needs a column to the right. The skill and fs.md had Collapse as a column word; it folds the pane it is given. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* docs: through a mount a malformed write is EINVAL and one that fails is EIO, ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | and the error words keep it so The served README said every refused write reads as EINVAL, but a mount's errno is 9ns's reading of the error's words, so a no-match or out-of-range address and a refused Exit came back EIO, as the dogfood run saw. That split is the useful one, malformed against failed, so the docs now state it rather than the words being bent to EINVAL; a test pins each error's words to its side of it. It caught one: 'regular expression search took too long' read as ENAMETOOLONG, and now says it gave up past its step budget. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An address searches back after a minus, and a range ending before its start ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | | is refused -/re/ searched forward, since only ?re? set the direction, where acme's address() takes the direction a minus set (addr.c). And #100,#50 was taken, leaving data to act on an empty range at 100; sam refuses it as 'addresses out of order', which acme leaves out, and so does pardes now. The rest of the dogfood report on addresses already held and is now tested: an expression is evaluated from the current address, as acme evaluates it from w->addr (xfid.c:446), so a search starts where the last address or data write left it and . is that address. Taking . as the selection instead, as the report asked, would part from acme, which has dot only in its ctl messages; the docs say which is which. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A click that takes no text tells the event reader nothing, and click records ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | are tested for their offsets Dogfooding saw a body right-click reported as ML0 0 2 3 qty. On file panes the offsets were right in every case tried here (a scratch made over 9P and clicked while another pane is active, after a hover, scrolled, soft-wrapped, tab-indented, inside parentheses); the test now holds them. The 0 0 form is a terminal's body, which has no offsets to give (its body is a history snapshot); since the event file now takes a record back whole, such a record can still be written back and done, and the docs say so. What the test did find: a click on whitespace sent an empty record, where acme's look3 and execute return without a word on an empty expansion (look.c:37, exec.c:141). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A line written to a pane's own look or exec goes to the event reader holding ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | the pane A script writing to pane/N/exec bypassed the client holding that pane's event file, which a middle click on it would not: acme sends a window's clicks to its event reader (look.c:53, exec.c:173). Such a line is now an F record at 0 0 carrying its text; the root's look and exec still act at once. acme takes back only origin, action and range, which a record with no place in the text cannot use, so the whole record as read is taken too, and for an empty range acts on its text. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Restore answers its writer before hanging up, and the log records dumps ↵Gabriel Schneider8 days
| | | | | | | | | | | | | | | | and restores A client that wrote Restore saw its connection cut with no answer, and could not tell a Restore from a crash. The listener now lets the writer's answer out before the cut, and cuts only the old editor's connections, refusing their requests meanwhile; a client that dials during it is the new editor's and stays. Dump logs 'dump <path>' and the restored editor's log 'restore <path>'. Keeping connections across a Restore was weighed and left: the fids name the old editor's panes and opens, so it would mean carrying serials and open records into the new one, where acme's Load only adds windows. tty's Restore also closed its shells' ptys without reaping them; it retires them now. Co-Authored-By: Claude Opus 5.5 <[email protected]>
generated by cgit v1.3 (git 2.53.0) at 2026-10-09 04:45:31 +0000