summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* A command or terminal pane refused for room is refused before anything is ↵Gabriel Schneider21 hours
| | | | | | | | | | | | | | | logged or answered of it, and a serial is never handed out twice A command pane with no room logged `new N` and `run N ls`, was answered to its exec, then went with `del N` and no `exit N`; and sync gave N back (`next_serial -= 1`) to the next pane made, so a script holding N found another pane under it. Tty did the same. Both now take a refused placement back at once, before the run is logged or the serial answered (the pane was never announced, so it leaves no record), and fail the write with no room. The decrement is gone: gaps are fine, and a serial once said names one pane for good. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A command line runs when its newline comes, or at its open's close, never ↵Gabriel Schneider21 hours
| | | | | | | | | | | | | | | | because a write was short: a long line cut by a mount is one line A write shorter than its message, and not a multiple of 4096, was taken as whole, its tail a line. 9ns cuts a FUSE write of up to 512 KiB into 65512-byte Twrites, the last one short, so a 600 KiB `Edit ,c/.../` arrived cut and its tail ran as an unknown control message; the 1 MiB refusal failed the same way. Each open now holds a partial line until its newline, or its release, which ends the last line; an Edit block is whole when it closes, as before. A name write with a NUL still fails its write at once. selfmount writes a 600 KiB Edit line and a 1.1 MiB line through a real 9ns mount; building.typ says how lines are cut. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Grep's miss says `Grep: text not found`: it is a literal search, and ↵Gabriel Schneider21 hours
| | | | | | | | | "pattern" suggested a regular expression Still ENOENT through a mount ("not found" is in 9ns's table, and the unit tests' errno-words check holds it so). The guide's quote follows. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Shift-Esc always backs out: in every mode and pane it goes to the previous ↵Gabriel Schneider21 hours
| | | | | | | | | | | | | | | pane, as Esc does from normal, and a raw program never sees it; Ctrl-b alone toggles raw Shift-Esc switched a terminal in normal or insert mode into raw, so the one key meant to get out of anything got a script or a person into a program instead. It is now handled before any mode: an open prompt is closed, insert mode left, a pending count dropped, and Last runs, the pane keeping its mode (a raw terminal stays raw). Ctrl-b is the only switch between raw and normal. The keymap's two chords become one, back_out; the cheatsheet row, the guide's mode table and the tutor say so, and the tty and builtins goldens are re-recorded. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Release Pardes 0.23Gabriel Schneider22 hours
| | | | Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs take round 36: empty names, get as an undo step, what a Dump keeps ↵Gabriel Schneider22 hours
| | | | | | and Restore reads, Find and Grep caps and notes, the ctl read's collapsed and fit/tint, PDF search hits, ./x misses, 1 MiB lines, DumpDir, bad dials, /pager files, rename previews, Lspinfo, and --wait from an agent Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A language server goes with its children when reaped, and every server's ↵Gabriel Schneider22 hours
| | | | | | | | | | | | | | process group is killed as pardes exits: no zls or `zig build --build-runner` outlives the editor The server is spawned with setsid, its own group's leader, but reap() signalled only its pid, and nothing reaped the servers at exit: the socket closing was left to tell them. zls busy in its build runner at a cold start did not notice, and lived on with its `zig build` for as long as no one killed it (found as three orphans 40 minutes after their sessions had gone). reap() now signals the group, and an atexit hook, registered at the first spawn, kills every server's group. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* `pardes --wait FILE` with $PARDES_9P set but no pane of its own (an agent's ↵Gabriel Schneider22 hours
| | | | | | | | | | | | or a script's EDITOR) asks that session and waits there, not a screen of its own Forwarding asked for $PARDES_PID and $PARDES_PANE, which only a pane's shell has, so a client that talks to a session from outside its panes got a full editor drawn in its terminal. With --wait and $PARDES_9P alone, the file is looked at through the session's root look and the wait is for that pane's del. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Mount dial with a network pardes does not dial (`nowhere!x`) is a bad dial ↵Gabriel Schneider22 hours
| | | | | | | | | | | address, EINVAL, not a session name that does not answer A dial with a `!` and no `/` that was neither tcp!, quic! nor unix! was taken for a session's name, failing as `dial failed: no answer`, EIO. It is now refused as the malformed address it is, before any dial. A path with a `!` in it still dials. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* DumpDir refuses a relative directory and one that may not be written, up ↵Gabriel Schneider22 hours
| | | | | | | | | | | | | front, and a Dump that could not make its directory says permission denied A relative DumpDir was resolved from wherever pardes started, and one under a directory that may not be written was taken, the Dump failing later as `no such directory`. DumpDir now takes an absolute or `~` path whose nearest directory there may be written, and refuses any other with what it takes; a Dump refused by a directory above says permission denied (fs.deniedAbove), as a Save does. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A ctl, exec or look line over 1 MiB is refused once, EINVAL in words a mount ↵Gabriel Schneider22 hours
| | | | | | | | | | | | | maps, and the rest of it is dropped through its newline, not run as a second line Past the 1 MiB a line may hold, the write that crossed it was refused and the pending text dropped, but what followed of the same line was taken as a new line and ran when its newline came: a second refusal, `unknown control message "zzz…"`, and a second err. The open now drops the rest through the newline, and the refusal says `invalid write: a line or Edit block over 1 MiB`. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look of `./x` that is not there is a miss, as `x` and `/abs/x` are: the ↵Gabriel Schneider22 hours
| | | | | | | | | | | write answered, the err logged, not ENOENT `./x` and `../x` failed their write with ENOENT while every other name that opens nothing was a miss the write was still answered with. They are misses now too, said and logged `look: ./x: no such file`. A pane's own directory gone stays a failure. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A pane's ctl read says Collapse and a PDF's PdfFit and PdfTint (`collapsed`, ↵Gabriel Schneider22 hours
| | | | | | | | | | | | `fit:height tint:full`), and a Dump keeps the PDF's two Neither showed in the tag or the ctl, and a Restore brought a PDF back at width fit and the default tint. The ctl read ends with `collapsed` when it is, and a PDF's `fit:` and `tint:` in the words PdfFit and PdfTint take; the dump's image record carries pdf_fit and pdf_tint (empty in older dumps: the defaults). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A PDF place `:P:H` whose search hit H is not on page P, or with no search, ↵Gabriel Schneider22 hours
| | | | | | | | | | | | | is a miss with an err, as a page past the last is The second number of a PDF place is a hit of the pane's search (its search rows are `file.pdf:P:H`), and one that named no hit turned to page P silently. pdf State.hitExists asks the pane's search for page P: a hit it does not have, or any hit with no search, is now `<file> has no search hit H on page P`, on the pane itself (`:P:H`) and from anywhere (`file.pdf:P:H`); a search row's hit is always there. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* /pager given a file that is not a directory says so, ENOTDIR, not `no such ↵Gabriel Schneider22 hours
| | | | | | directory` Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Lspinfo's exec answer is the +Lsp pane it fills: any language answer that ↵Gabriel Schneider22 hours
| | | | | | | | | | | fills a pane answers that pane, made or filled again The answer was taken from the asking pane's search pane, which a listing like +Lsp never sets, so Lspinfo answered the file pane. The pane the answer filled is now known from what fillResults made or refilled, whatever kind of listing it is. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Find's notes stay at the end, under the names it found, as Grep's do: `1 ↵Gabriel Schneider22 hours
| | | | | | | | | | directory skipped` no longer sorts first Find's rows are sorted by path as they are filled in, and the note line was sorted with them, so it led the list. The rows above the first note are sorted, the notes left where they are. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Grep and Find say when a cap hid what they might have found: `cut at 512 ↵Gabriel Schneider22 hours
| | | | | | | | | | | | | | | | hits`, `N files read only in part (first 256 KiB)`, `walk cut at N entries`; one that finds nothing leaves the +Search as it was Grep reads 256 KiB of a file and stops at 512 hits, and its walk at 20000 files or 100000 entries; Find stops at 512 names. A cap hit was silent, so a match past one read as `pattern not found`. The walk now notes each cap it hit (fs.WalkNotes) and the +Search says it in a line under the hits, as it says directories skipped; a search that found nothing but hit a cap opens the +Search with those lines, not a miss. A Find or Grep that finds nothing and passed nothing over leaves the directory's +Search with the last search's rows, its failure saying so, where it used to empty it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A language server that failed a moment ago is said to have failed, with when ↵Gabriel Schneider22 hours
| | | | | | | | | | it is tried again, not `language server for .zig not found` During the backoff after a failed spawn or handshake, ensure() answered NoServer, which the client turned into "not found" for a server that is installed. It is now Backoff, said `zls failed recently; retry in Ns`. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Rename the server answers for this file alone, while other open files of ↵Gabriel Schneider22 hours
| | | | | | | | | | | | | | | | | its language say the name, is previewed, never applied; Lspwhy shows the files synced first zls renaming at a declaration answers with that file's edits only, cold or warm, whatever it was told of (checked against zls directly: from a call site in main.zig it renames both files, from the declaration in util.zig it never does), so the first Rename applied in util.zig and left main.zig broken. The client now looks for the old name in the other open files of the language; when one says it and the answer left it alone, the edits are a preview with a row naming each such file, and the message row says the server renamed in this file only. Lspwhy carries the open files too, so its trace shows `synced X first` for the query it explains. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Restore reads a clean file from disk, and an unsaved one whose file changed ↵Gabriel Schneider22 hours
| | | | | | | | | | | | | | | | | | | | | since the Dump is said changed, its first Save asking before overwriting it A Restore put back the dump's copy of every file pane and armed the watch with the disk as it now was, so a file changed on disk after the Dump came back as its old text, marked clean, and the next Save wrote the old text over the new without a word. A clean file pane's text is now not in the dump: Restore reads its file (an older dump's copy is read past too, and used only when the file is gone). An unsaved pane keeps its text once, base64, the plain copy beside it dropped, with the hash of the file it was read against (`disk_hash`); a Restore that finds another there says the file changed on disk, and Save asks once before overwriting it, as for a change seen while it was open. file_watch.zig's own tests were never collected (no test root imported it): main.zig's test block does now, and the restored watch test says what a clean restore now reads. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Release Pardes 0.22Gabriel Schneider24 hours
| | | | Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs take round 35: cloud9's errno table, Restore's parser words, insert ↵Gabriel Schneider24 hours
| | | | | | after a match, LookWord list rows, the last-run awk without exit, command pane directories, rename previews, listings that keep the keyboard, set-value toggles, pty/run one line a write, /pager resolving, PDF :N:H, skipped directories and Lspinfo Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Petscii, Palette, Ascii, PdfFit and PdfTint take the state their tag word ↵Gabriel Schneider24 hours
| | | | | | | | | | | | | names, set rather than flipped: `Petscii on`, `Palette terminal`, `PdfFit width` Each could only flip, so a script had to read the tag to know which way a write would go. Each now takes an optional argument, the value its tag word shows (on|off for Petscii and Ascii, commodore|terminal for Palette, width|height for PdfFit, disabled|filtered|full for PdfTint), and sets it; bare, it flips as before. Anything else is refused with what it takes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A file name with a newline is refused naming it once: `pardes: ↵Gabriel Schneider24 hours
| | | | | | | | | | two\nlines.txt: a file name is one line...`, not `a file name: a file name ...` The refusal's subject was the words "a file name", and its reason began with them again. It now names the name given, its newline shown `\n`, as /log and /index show one. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A second LookWord list look in a directory refills its +Search, as a ↵Gabriel Schneider24 hours
| | | | | | | | | | terminal's word looks already did, rather than stacking another Each word looked at with LookWord list opened a +Search of its own in the same directory. Word looks now share the directory's one, the next word refilling it; a `/` search still keeps a +Search each. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* `@pN:` looks at pane N, its trailing colon dropped as any look's is, and a ↵Gabriel Schneider24 hours
| | | | | | | | | | | line past the end is said one way: `<file>:N has no line N`, for `:N` as for `file:N` lookAt dropped a trailing `:` from what it read but resolved the target from the text as written, so `@p33:` was `no match for "@p33:"`. And `:99999` said `address out of range` while `file:99999` said `has no line 99999`: a bare line number past the end now says the latter too. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A terminal's petscii:on survives Dump and Restore: the dump says it, and the ↵Gabriel Schneider24 hours
| | | | | | | | | | restored terminal draws its graphics as glyph art again An image pane's Petscii choice was dumped; a terminal's was not, so a Restore brought it back drawing pixels. dump.Terminal carries petscii, and a restored terminal is turned to glyph art when it was. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A name write to a terminal, image or PDF and Edit on a pane with no text are ↵Gabriel Schneider24 hours
| | | | | | | | | | | refused EINVAL, in words a mount maps so: `invalid rename: ...` and the data write's own refusal `rename not allowed: ...` went out EPERM, and `Edit ,d` on a PDF ran and failed late, EIO, while a data write there was EINVAL. The rename refusal now says `invalid rename` with EINVAL, and Edit on a pane with no text is refused before anything runs with the data write's words. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* `:N:H` looked at on a PDF pane turns to page N, as `book.pdf:N:H` does from ↵Gabriel Schneider24 hours
| | | | | | | | | | anywhere, not a refusal that a PDF has no text A PDF's own pane took only `:N`; `:5:3` was refused as no text to address while `book.pdf:5:3` turned to page 5 (its search hit 3). lookPdfPage now reads the page before a colon and the hit after it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* /pager resolves its directory, `~` and `..` alike, and refuses one that may ↵Gabriel Schneider24 hours
| | | | | | | | | | | | | not be written, permission denied; `pardes -` from such a directory pages into the session's `/tmp/../etc` named a +Pager `/tmp/../etc/+Pager`, a second one beside `/etc/+Pager`, and `~/x` was refused as relative. The directory is now home-expanded and resolved before it is checked, and one that may not be written is refused as a file's name there is (fs.deniedAbove). `pardes -` run in such a directory (`git log` under /usr/src) asks for the session's +Pager instead, so its text is still paged. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A refused /pager write leaves its open no answer, not the +Pager it answered ↵Gabriel Schneider24 hours
| | | | | | | | | | before writePager emptied the answer only once the directory had passed, so a read after a refused write on the same open still gave the last write's serial. It is emptied first, as a refused look or exec leaves none. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Lspinfo before any query says a server is not started yet, its first query ↵Gabriel Schneider24 hours
| | | | | | | | | | starting it, not `off` while it is on PATH A server is spawned on its first query; until then its row said `off`, which reads as disabled. It now says `not started yet (its first query starts it)`; a server disabled by its environment still says so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Rename, references and the like tell the server of every open file of its ↵Gabriel Schneider24 hours
| | | | | | | | | | | | | | | | language first, so a rename reaches files it had not seen and the preview lists them zls renames only in the documents in its store, and syncDoc told it of a file only when a query was asked from it, so renaming in progress.zig left main.zig unchanged and broken, with no preview. For a query whose answer can reach other files (rename, references, implementation, workspace symbols, calls and type hierarchy), the host snapshots every other open file and the client syncs those its server answers for first. The mock server answers a rename in each document it was told of; lsp-rename-files opens main.rs by a look, renames from lib.rs, and its preview lists both. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Rename that previews other files answers its preview pane to the 9P write ↵Gabriel Schneider24 hours
| | | | | | | | | | | | | that asked it, and says on the message row that it previewed and applied nothing A multi-file Rename filled a +Search preview but the waiting exec write answered the pane it was asked from, and nothing was said. lspResponse now notes the pane it filled (fs.lsp_result); the write that waited for the answer reads that pane back, as a look or an exec answers the pane it went to, and the message row says `Rename: N edit(s) across files, previewed, not applied`. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Grep and Find pass over a directory they may not open and keep every other ↵Gabriel Schneider24 hours
| | | | | | | | | | | | hit, saying in one line how many they skipped One `chmod 000` directory anywhere under a pane made every Grep say `pattern not found` and every Find `access denied`: the walk's `try w.enter`/`try w.next` ended it at the first refusal. Each is now counted and passed over, and the +Search ends `N directories skipped: permission denied` under the hits. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Every EINVAL or ENOENT refusal a unit test meets must say its errno in words ↵Gabriel Schneider24 hours
| | | | | | | | | | | | | | a 9ns mount maps back: pardes re-pins cloud9, whose fs.enameErrno knows acme's address and argument refusals The tests' request helper asks cloud9's fs.enameErrno, the rules 9ns turns a refusal's words back into an errno with, for every EINVAL and ENOENT a request is refused with, and fails the test when a mount would hear another (EIO, mostly): "this pane has no text to address" was one. The re-pinned cloud9 maps acme's own refusals, which pardes keeps in acme's words: no match for regexp, address out of range, addresses out of order, range past end of body and the rest. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Release Pardes 0.21Gabriel Schneider25 hours
| | | | Co-Authored-By: Claude Opus 5.5 <[email protected]>
* addr, dot and limit on a pane with no text are refused `invalid address: ↵Gabriel Schneider25 hours
| | | | | | | | | this pane has no text to address`, which a mount reads as EINVAL, not EIO 9ns maps a refusal back to its errno by its words; "this pane has no text to address" held none it knows. The reference quotes the new words. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* /pager's refusals say invalid, so a mount's shell hears EINVAL: `pager: ↵Gabriel Schneider25 hours
| | | | | | | | | | | invalid directory "relative": must be absolute` 9ns maps a refusal back to an errno by its words, and "the directory must be absolute" and "one directory a write" held none it knows, so a shell through the mount got EIO for both. They now say `invalid`, as every EINVAL here does, and the reference quotes the new words. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Recipes work through a pane of their own, its look and exec, and keep a ↵Gabriel Schneider26 hours
| | | | | | command pane while their open lasts; the docs give cmd panes, the err grep, alt-screen prompts, /pager's refusals, Tty+ on a ctl, --, and theme failures in words Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Restore whose ThemeFile fails to load changes no theme: the session goes ↵Gabriel Schneider26 hours
| | | | | | | | | | | | | on showing the one it did, its file still the one named A Restore makes a fresh core, which started at the default theme and asked for the dump's ThemeFile; when that file had broken since, the failure reverted to what the fresh core had loaded, nothing, and ink became orchard. A Restore that asks for a ThemeFile now carries over the theme the old session showed and the file it loaded (and its Theme, unless the dump names one), so a failure there changes nothing. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A msg record carries what was said, not the message row's clock: `msg 21 ↵Gabriel Schneider26 hours
| | | | | | | | | | dumped themes ...`, no `04:39:41 ` before it Messages a host stamps (saved, reloaded, dumped themes) went into the log with their clock and its double blank. The log has no times; noteMessage records the words after the stamp (Message.body). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A pane ctl takes Tty+bash as exec and the tag do: a word that takes its ↵Gabriel Schneider26 hours
| | | | | | | | | | argument after a + is no unknown control message there checkBuiltin split a line at its first blank only, so `Tty+bash` was one unknown word on a ctl while exec ran it. It now splits at the + for the words whose registry entry says they take one so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* /pager refuses a directory that is not there, ENOENT, and a relative one, ↵Gabriel Schneider26 hours
| | | | | | | | | | EINVAL: no +Pager named into a missing directory, none quietly the session's `/(/+Pager` was made for a missing absolute directory, and a relative one fell back to the session's without a word. An empty line still asks for the session's directory. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A body write to an image or a PDF says its body takes no writes, not that ↵Gabriel Schneider26 hours
| | | | | | | | | | the pane has no text "(a terminal, ...)" A terminal's body takes writes (its keys), so the old words named the one kind that does. data, sel and dirty keep "this pane has no text", which is true of all three. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Restore and ThemeFile failures say why in words, a ZON one with its line: ↵Gabriel Schneider26 hours
| | | | | | | | | | | | | | never FileTooLarge, ParseZon or a bare `parse zon` Restore read failures named the Zig error (FileTooLarge, NotAFile, ReadFailed), a file that is no dump said `not a pardes dump (ParseZon)`, and a ThemeFile that did not parse said `parse zon`. Messages.errorWords says an error in words (the few that read badly spelled out plainly, the rest spaced and lower case, as reportError did), and zonWhy gives the parser's first error with its line: `not a pardes dump: line 1: expected ...`, `theme file x.zon: line 3: ...`. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A name under a directory that may not be searched or written is refused, ↵Gabriel Schneider26 hours
| | | | | | | | | | | | | | permission denied, and a Save there says so, not no such directory `pardes noperm/a/b/c` and `pardes /proc/1/root/x` took the missing directory for one Save would make, opened a pane and exited 0; its Save then said "no such directory". fs.deniedAbove finds the nearest directory there and asks whether it may be searched and written: forwarding refuses such a name, exit 1, "permission denied", and a failed Save says "permission denied", which the writer's 9P error carries as EPERM (9ns: EACCES). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* `--` ends pardes's options: `pardes -- -dash.txt` opens the file named -dash.txtGabriel Schneider26 hours
| | | | | | | It said `no such option: --`. What follows `--` is a name, one at most, as for any other positional. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A shell's prompt drawn on the alternate screen is a prompt: a terminal whose ↵Gabriel Schneider26 hours
| | | | | | | | | | | | | | | | program was killed there is no longer busy for ever htop killed with `sig KILL` leaves the emulator on its alternate screen; bash comes back and draws its prompt there, marks and all, but promptInputReady refused any prompt on the alternate screen, so pty/status said busy 1 and pty/run answered a bare `busy` for good. A prompt mark there now counts. A run sent at such a prompt leaves the alternate screen in the emulator first, as a reused command pane does, so its output lands on the primary screen and is read whole, not `exit 0 cut` with nothing. Busy there with no prompt drawn, and no program name to give, a run is told `busy alternate screen`. Co-Authored-By: Claude Opus 5.5 <[email protected]>
generated by cgit v1.3 (git 2.53.0) at 2026-10-02 10:09:21 +0000