summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* | The 9P monkey lets a failed write's op log a msg when another of its Twrites ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | succeeded A ctl line cut across Twrites runs a piece a Twrite: in seed 109, "Save Pl" ran Save and said so, and the next piece, "acem", was refused. one_failure_rule took the msg as the failed write's. It now flags a msg only when no Twrite of the op succeeded. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A terminal's rows asked for after its cached rows were dropped, before the ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | step's sweep, are scratch: the cached ones are freed, not overwritten dropPane clears the rows cache's pane but keeps its allocations until the next step's sweep, since they may still be borrowed. shellRows took a cache with no pane as free and wrote a new gpa-built entry over it, leaking the old one: the 9P monkey's seed 109 (a look searching a terminal after its pane was torn down in the same step) ended its session with the debug allocator's leak panic. A slot still holding rows now gets scratch rows, as one holding another pane's already did. A unit test drops and asks again under the testing allocator (it leaks without this). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A socket path too long for sun_path leaves no listener and the editor's turn ↵Gabriel Schneider30 hours
|/ | | | | | | | untouched: the GUI no longer calls into a freed one at startup listen started the editor's turn and pointed its answer_held and wake_parked hooks at the new Listener, then, when socketPath found the path too long for sun_path (108 bytes), freed the Listener with gpa.destroy while the hooks stayed set; the GUI's next rest (waitInput) called answerHeld on freed memory and died with SIGSEGV. The lapis bench's runs crashed for 12-character names in an 82-byte runtime directory (a 110-byte path) and not for shorter ones. The path is checked before anything is made; a unit test asks listen for a name too long and finds the turn's hooks clear and the turn not started. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Release Pardes 0.6Gabriel Schneider30 hours
|\ | | | | | | | | | | Merge: audit top-five cuts + tag sweeps + Config/DumpConfig (on the audit bug fixes C9, C2). Co-Authored-By: Claude Opus 5.5 <[email protected]>
| * Config opens the startup file, DumpConfig the settings report, and the ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | workspace tag reads Dump Themes Config Debug Exit Config (SPC f c) opens init, found as the settings report finds it (opts.startup_config_path: $XDG_CONFIG_HOME/pardes/init or ~/.config/pardes/init, and the macOS and Windows paths config.md gives). A pane that already holds it is gone to instead; a file on disk is looked at; with none, an empty pane is named for it, and Save makes its directory and any above it first (File.make_dirs, fs.makeDirs) before writing. Without a configuration directory it says so and opens nothing. The report Config used to open, the startup path and every live setting, is DumpConfig, in a +DumpConfig pane. No alias keeps the old meaning. The workspace tag's default words put Themes where NextColor was, NextColor staying a builtin, and Config beside it. A tag the user edited is kept as it was: a dump stores only an edited one (topbar_custom), and a restore puts back only that. theme.snap types NextColor onto the workspace tag to click it, and tagnav's walk back to Dump takes five long-word steps. The rest of the re-recorded goldens differ in the workspace words and their widths only. Co-Authored-By: Claude Opus 5.5 <[email protected]>
| * A middle or right sweep over a column's or the workspace's tag runs or looks ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | for what it swept, as a pane tag's does Both headers acted on the press: a middle or right press ran, or looked for, the word under it (or the header's selection when it was on that) at once, so a drag had nothing left to do. A sweep of `echo SWEPT` in a column tag ran a bare `echo`. They have done so since the headers were drawn apart from the panes; it is no regression, and the -l/Restore allocator fix (ompukopz) does not touch it. Now a press on a header holds a HeaderSweep (the column by its serial, or the workspace), which the drag extends, held to the header's row and text as a pane tag's sweep is. It is painted in its button's tint meanwhile, and the release runs what it swept in that header's context; a release that has not moved runs the word or selection a click always did. The other of middle and right cancels it (acme 2-3/3-2); the select button is inert, as a header's command already takes the held selection as its argument. Running on the release, a builtin from a header is announced as one from a pane tag is: the press used to set the announcement and the release clear it at once. find, restore, theme, topbarexec, ttyhelp, tutor and windowops re-recorded for that badge alone. headersweep.snap sweeps the column and workspace tags with the middle button and a word part with the right one, and cancels a sweep; headersweep-restored.snap sweeps both after Dump and Restore. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | The PDF benches share their clock, fatal exit, hash, count parser and effect ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | drain, and lspprobe is lspbench's probe subcommand B4: test/bench_util.zig holds what pdf_bench, pdf_pointer_bench, pdf_scroll_bench and pdf_sections_bench each copied (nowNs x4, fatal x3 named per bench, mix x3, parsePositive/parseCount x3, drainEffects x2). They stay four entry points: pdf_bench links its own mupdf module (with its C source and c_heap) where the others link the core's, which one executable cannot import under one name, and their reports and identities are each bench's own. pdf_sections_bench had rotted since the pane's cursor and selections moved to its body and the render revision became next_raster_revision; it builds and runs again. C6: tools/lspprobe.zig is lspbench's `probe` subcommand (zig build lspbench -- probe <kind> <file> <line>:<col>), and the lspprobe build step goes; docs/lsp.md names the new command. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Dumps and init files from before 0.0.4 load no more of their old tag ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | formats, and three orphan test scripts go A2: a restored pane's tag tail comes from the dump's tag_tail, which every dump since 0.0.4 writes; the 27 earlier default tails that were recognised to upgrade, restoreTail, tailClass, savedPrefix and restoreTailAt, pdf_view's and image's legacySavedPrefix, a terminal's TTY tag prefix and its raw output tail replay, and the ThemeSel, FontSel and ColumnTags words (init lines and dumped output names) go, with their tests; the CHANGELOG says so. A4: test/fs_soak.py, referenced nowhere (monkey9p.py does its work). A6: test/column_grip.py and test/look_placement.py, referenced nowhere; the six review scripts docs/ui-review.md names stay. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | The hosts' Save, Dump and DumpThemes writes and their shell reaper are ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | host_io's, once, where the tty, the gui and the detached session each had a copy writeFile, writeDump and dumpThemes were byte-for-byte the same in tty.zig, gui.zig and detached/server.zig but for how each reaches its core, and the gui's and the session's reapers the same but for a pid <= 0 against == 0 (a pid is never negative there). Each vtable entry is now a line calling host_io's. ttyTaken, fgName, killJob and ptyResize stay each shell's: they are already one call to host_io each, and what differs is how a shell reaches its pty (an optional with a file, an optional with an fd, a bounds-checked array). macos.zig keeps its copies (no macOS build here to check it). No behaviour changes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Zig files go to zls as a child process through the protocol client, as every ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | other language does: the in-process ZLS backend goes lsp_zls.zig (1,522 lines), the zls dependency, build.zig's zls wiring and the import graph it baked into the options only for it, and main.zig's reference go. lsp_client's table gains a zls row (PARDES_LSP_ZIG overrides it); Hover, Rename, Diagnostics, WsSymbols, Lspinfo and gd answer through it (checked with lspprobe and the snapshots against zls 0.16.1-dev). What changes for a user: zls must be on PATH; a completion's rows are zls's candidates at the cursor, where the linked analyser gave each one's declaration; document symbols carry no signature. The Zig snapshots (lsp, lspcomplete, lspcompletemoved, lspdebug, lsprelpath) run the real zls now: lspdebug reads the client's explain and report, lsprelpath spells gr's rows where it spelled a completion's, and their goldens are recorded again (stable over three runs). Lspinfo still opens with its backend line. The ReleaseFast tty binary is 105.35 MB to 96.28 MB, the Debug one 296.5 MB to 245.9 MB. docs/lsp.md, web.md, design.typ and the README say so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | The GUI embeds its shaders' GLSL from shaders/ always: the 14 prebuilt ↵Gabriel Schneider30 hours
|/ | | | | | | | copies, identical to their sources, go, and so does the label saying which was used shaders/prebuilt/*.glsl were byte-identical to shaders/X.glsl or to prefix.glsl + post/X.glsl (checked with cmp, all 14), kept only so a -Dprebuilt-shaders build could name them; EffectCode and Config then labelled the GUI's shader source as live or prebuilt. The GUI embeds shaderSource (a concatenation, no glslc) either way now; the prebuilt SPIR-V stays, and zig build shaders refreshes only it. Config's report and EffectCode lose their GUI shader source line. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* F1-F25, Insert and the keypad reach a GUI's terminal panes: one vaxis key ↵Gabriel Schneider30 hours
| | | | | | | | map, vaxis_input.zig, for the tty, the gui and the board The vaxis-to-Event key mapping was copied in tty.zig, gui.zig and esp32p4.zig, and the copies had drifted: the gui's (its stdin feed, which test windows and a gui started in a terminal read) had 9 arms against the tty's 26, without the function keys, Insert or the keypad, so they reached a terminal pane as private-use codepoints. vaxis_input.zig holds effCp, mapKey and keyEvent once; the gui posts through postKey, and a test runs F5, Insert and the keypad's Up through it into a terminal pane. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A session restored from a dump is built as a fresh one is: its column and ↵Gabriel Schneider30 hours
| | | | | | | | workspace tags take several selections, and its 9P files have a time dump.initDump copied Pardes.init's construction and had drifted from it: it never gave the column and workspace tags their allocator, so after -l or Restore they could not hold more than one selection, and never set fs.started, so every 9P mtime read 0. Pardes.create is now the one construction, allocators, tags, the tree's clock and the mounts, that init and initDump both start from. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Release Pardes 0.5Gabriel Schneider30 hours
| | | | Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Merge: Terminal rename + Kill signal orderGabriel Schneider30 hours
|\
| * Kill stops a command's shell before its jobs, so the line never runs on to ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | its next command in between signalTty signalled the running job's group first, then scanned all of /proc for the session's & jobs, then the shell. A job dead of the signal lets a job-control shell run the line's next command, and once pids wrap below the host's older processes the scan takes long enough for it to: "sleep 0.4; touch killed" killed at 150ms touched the file. The host_io test caught it every run after the pids wrapped (pid_max 4194304, new pids near 17000, 229 older processes above them to scan). The shell's group now goes first, then the session's groups, then the foreground one. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Terminal.zig is terminal.zig: a file of functions and no fields takes a ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | namespace's lowercase name The last of the deferred renames, now that the tty and theme agents have landed: panes.terminal at its importers, the alias lines in Text.zig and File.zig and panes.zig's own uses following. dump.zig's Terminal struct, a dump record, is not this. The served sources list and docs/design.typ name the new file. test/perf.zig's references change, so the three perf baselines take its new harness id with their numbers as recorded. No behaviour changes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Merge: renames/folds + tagline accents for every themeGabriel Schneider30 hours
|\ \
| * | acme tints a tag's file name, +Name and Tty word quietly, in its own ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DMedblue #000099 acme tints nothing in a tag, but the tint is a pardes indicator the user wants in every theme. #000099 is acme's own (draw.h DMedblue, its dirty button): a navy that reads as ink until you look for it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
| * | A theme that names no tint for its tags' names takes one of its own hues, so ↵Gabriel Schneider30 hours
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | every theme draws a file's name, a +Name and the Tty word off the tag's ink The faithful ports (neobones_dark, dracula, tokyonight, the *bones, ...), every helix import and any theme file set no tag_name_fg, and ChromeTheme fell back to the plain ink: their tags lost the accent the pardes themes have. The user's neobones_dark looked tinted before only because the Sep 24 build had no such theme and fell back to orchard. The tint is now derived when unset: the theme's keyword colour, else the first of its ANSI accents, syntax, grip, selection or diagnostic colours with a hue, placed at the lightness nearest the ink where the hue holds, at least 4.5:1 on its ground (half a point under the ink's own where the ink has less to spare) and 0.07 off the ink in OKLab. Each ground, plain and focused, gets its own. A theme that names its tint keeps it exactly. Tests: every theme's chrome keeps both tints off the ink and legible; every theme draws a file's basename, +Errors and Tty+sh in a tint, focused or not. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | fs.py waits for a new file's pane to be named, not only madeGabriel Schneider30 hours
| | | | | | | | | | | | pardes --wait NEWFILE reads pane/new and then writes the pane's name, two requests; the test checked /index for the name as soon as the pane showed, and a gate run caught it between them. It waits for the name now. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | locations_config.zig and locations_cache.zig fold into locations.zig, the ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | Locations setting and cache beside what uses them Config (75 lines) was re-exported from locations.zig already, and Cache (213) served only its format; locations.zig is 683 lines with them. The cache's own Result, which would be ambiguous beside locations' Result in one file, is Cache.Hit, what its comment already called it. pardes.zig, dump.zig and main.zig import locations.zig. No behaviour changes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | tag_layer.zig folds into Layer.zig, whose TagHit its two functions work onGabriel Schneider30 hours
| | | | | | | | | | | | Two functions (sameCell, columnAt) on Layer.TagHit, 32 lines with their imports, used by edit.zig, mouse.zig and look.zig: they sit with the type now, called Layer.sameCell and Layer.columnAt. docs/design.typ names Layer.zig in its place. No behaviour changes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Mini.zig is mini.zig: a file of functions and no fields takes a namespace's ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | lowercase name The naming the split agreed on, deferred until now; panes.mini is its name at its importers. File.zig keeps its alias line (const Mini = panes.mini) so the file another agent is working in changes by that line alone. The served sources list and docs/design.typ name the new file. No behaviour changes; test/perf.zig's two references change, and since the perf harness is keyed by its own text, its three baselines are recorded again (under other agents' builds, so a little slower). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | shader_build.zig is ShaderBuild.zig: a file that is a struct (its fields are ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | the post chain's builds) takes a type's name The naming the split agreed on: a file with fields is a type, TitleCase, as Messages.zig and Layer.zig are. Its importers bind it as ShaderBuild; comments and docs/render-pipeline.md name the new file. No behaviour changes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Messages.messageLog is Messages.at: the ring's i-th record, read as ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | p.messages.at(i) The rename deferred from the file split; no behaviour changes. Output.zig's one call follows. Co-Authored-By: Claude Opus 5.5 <[email protected]>
| |
| \
| \
| \
| \
| \
*-----. \ Merge: loose end + msize 64K + docs slimming + docs-audit fixes + monkey-gui ↵Gabriel Schneider30 hours
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | + tty ssh acked frames
| | | | * | Over a slow link the tty keeps one frame in flight: it asks the terminal to ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | answer after each, and draws the latest state when it does
| | | | * | vaxis sends a frame with nothing changed as nothing: its secondary-cursor ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | test read equal as changed
| | | | * | A blank whose ink alone changed is skipped in vaxis's own frame diff, not ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | weighed up per cell in the tty
| | | * | | The 9P monkey allows a look's misses to each Twrite that succeeded, not to ↵Gabriel Schneider30 hours
| | | | |/ | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | none when one failed A look line written a byte a Twrite is a look a byte, each its own write logging its own miss; when its last byte was a control character that one write failed, and the oracle dropped every miss allowance on the path, so seed 51 failed with 21 errs for 1 refused write. Allowances are now counted over the Twrites that succeeded (and an hwrite's only once it has). Co-Authored-By: Claude Opus 5.5 <[email protected]>
| | * / | The GUI monkey lives in test/ and runs as zig build monkey-guiGabriel Schneider30 hours
| | |/ / | | | | | | | | | | | | | | | | | | | | It was a scratch tool (.scratch/render/tools/gui_monkey.py) that the gates rely on and that imported fs.py from a workspace since removed. It is test/gui_monkey.py now, importing from its own directory, and zig build monkey-gui -Dplatform=gui runs it on the built window, the same hidden test windows; it exits 1 when a combination fails, and its outdir is optional. Co-Authored-By: Claude Opus 5.5 <[email protected]>
| * | | Newcol shares a column's rows out again when its narrower tags would leave a ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pane under its tag and two rows, or is refused A seeded sweep of placements (New, pane/new, Edit =, Tty, look, Delcol, deletes, refusals included) over screens 6 to 40 rows high found no refused placement that leaves a pane short since lyltlqnz and lrpzwyom; the pane a row short came from Newcol, which halves a column's width so long tags wrap onto more rows, raising those panes' minimums with no rows moved. Newcol now shares each such column's rows out again, and where a column has not the rows for every minimum there is no new column (Newcol: no space for a column: the panes' tags would not fit), as a size too small is refused. The sweep, 300 seeds, is the test; a user's drag or a tag grown by editing may still take a pane under, as before. Co-Authored-By: Claude Opus 5.5 <[email protected]>
| * | | The 9P server offers 64 KiB frames, not 8 KiBGabriel Schneider30 hours
| |/ / | | | | | | | | | | | | | | | 8192 was kept for round 24 because 64 KiB seemed to hang fs-test's restore detached space; that was the batch-wake overflow fixed in kmqtwqsm, which any msize could hit, and fs.py passes at 64 KiB with it. A client asking for more now gets it, so a write up to 64 KiB less 24 is one Twrite, and round 24's no-newline cutoff (write_room, the negotiated msize less 24) follows: fs.py checks a 20000-byte ctl line from a 64 KiB client is taken whole. Each of the 16 connection slots holds its buffers at the larger size. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | A tag write past the limit says tag: no space: over 4096 bytes, which 9ns ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | maps to ENOSPC as the docs say The tree answers ENOSPC, but through a mount 9ns maps the words, and tag: over 4096 bytes carried none it knows, so a shell saw EIO. The words now hold no space; docs/fs.md says ENOSPC again. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | A 9P error past 128 bytes keeps its reason: the path in it gives up its ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | middle to … An Rerror carries 128 bytes (Plan 9's ERRMAX) and the engine cut longer text there, and a builtin's failure was first clipped between words to 256 with ...: either way the end, which says why, was what went. tree.handle now fits a long reason by cutting the middle of its longest path, else of the whole text, on a character boundary, and reportFailure fills its buffer the same way. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | A Dump makes every directory missing on the way to its DumpDir, as a fresh ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | HOME needs outPath made only the last directory, so on a HOME with no ~/.local/share the default DumpDir failed no such directory. It now makes each missing parent, as mkdir -p; the known-wrong line in docs/divergences.md goes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | pardes NEWFILE in a pane opens a pane named it in the session, as acme's B ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | does, and a start with no terminal says so A name that did not exist yet failed resolveOs, so the launch fell through to starting an editor of its own, which on a pty with no controlling terminal (a detached session's) ended in a NoDevice error trace. A new name's directory is now resolved and the name kept: the launch reads pane/new and writes that path to the pane's name, so Save creates the file, and --wait waits on that pane (the git commit case). A standalone start whose /dev/tty will not open prints why and exits 1. fs.py covers both; the known-wrong line in docs/divergences.md goes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | A dump holds every column a session may, 16, not 6Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | Dump of a session with more than 6 columns failed bad dump columns, since dump.zig's max_cols was 6 while a session holds MAX_COLS. It is MAX_COLS now; the limit's lines in docs/fs.md and docs/divergences.md go. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | The docs and the 9P skill say each fact once, in the file that owns it, and ↵Gabriel Schneider30 hours
|/ / | | | | | | | | | | say only what a live session does Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Release Pardes 0.4Gabriel Schneider30 hours
| | | | | | | | Co-Authored-By: Claude Opus 5.5 <[email protected]>
| |
| \
*-. \ Merge: 9P round 24 + acme compat + fuzzer fixes + --wait + tty perf fixes + ↵Gabriel Schneider30 hours
|\ \ \ | | |/ | |/| | | | 9P monkey
| | * The 9P monkey's one-failure rule is a write's: a refused open, create or ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | remove, or a write to pane/new, must log no err The coordinator's reading of fs.md, now documented (slnyzzps): only a write or truncation logs its reason; a refused open (pane/new's and an OTRUNC one included), create or remove is its Rerror alone, and so is a write to pane/new. The oracle allowed an err or none for those, and required one for a refused pane/new open. Co-Authored-By: Claude Opus 5.5 <[email protected]>
| | * The 9P monkey counts the lines a write runs as the tree does: a short ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | write's unended tail is a line of its own Since round 24 (uwzuqzxp), a write to a lines file shorter than a Twrite holds is whole, as acme takes each write, so a look line written a byte a Twrite is as many looks as bytes, each missing with its own err. one_failure_rule still split the data on newlines whole, allowed one err, and failed the fixed smoke seed (20260929 step 607, size 20 6 written in bytes to look: 7 errs). served_lines models the tree's write (tree.zig) and has a self-check run at start. Co-Authored-By: Claude Opus 5.5 <[email protected]>
| | * A 9P monkey drives random requests at a throwaway session and checks the ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | documented rules test/monkey9p.py starts pardes --detach with its own HOME, XDG dirs and runtime dir, speaks raw 9P (test/ninep.py) with a timeout on every reply and Tflush for held reads, and after each seeded operation checks that pardes is alive, the one-failure rule over a marker-delimited log window (with and without a follower), /index against /pane, and chunked against whole reads. Every run writes a replayable ops log; a failure is saved with its seed and step, shrunk by delta debugging over replays, and the run goes on in a fresh session. Teardown makes the fuzzer a subreaper and kills every process carrying the session's token. zig build monkey-9p -- --seed N --steps M | --replay F | --shrink F; a 150-step fixed-seed smoke run is part of fs-test. Co-Authored-By: Claude Opus 5.5 <[email protected]>
| * | Snapshots leave out a blank cell's ink, which shows nowhere and the tty now ↵Gabriel Schneider30 hours
| | | | | | | | | | | | keeps from the frame before
| * | The terminal's capabilities are taken up when its answer comes, not at the ↵Gabriel Schneider30 hours
| | | | | | | | | | | | first key after it
| * | Faded ink on blank cells is not sent to the terminal: a focus change sent ↵Gabriel Schneider30 hours
| | | | | | | | | | | | every blank of the other panes again
| * | A lone ESC read by itself is the Escape key at once, not after a 50 ms waitGabriel Schneider30 hours
| |/
* | pardes --wait (-w) in a pane returns only once the pane its file landed in ↵Gabriel Schneider30 hours
| | | | | | | | | | | | | | | | is deleted, so it can be $EDITOR A launch inside a pane forwards its file to the session's look and returned at once, so fish's Ctrl-O (edit_command_buffer), git commit and crontab -e read their still-unedited file back and went on. With --wait, as acme's E against B and read the way plan9port's E reads acme's log, it finds the pane /index names the file by (the one already showing it, if open), follows /log on one connection with 'follow new', reads /index once more to catch a Del that came first, and then blocks with no deadline until that pane's del record: exit 0, or 1 when the connection ends with the session. The 9P client's one-shot requests keep their 2 s deadline; its new follow takes it for the setup only. Outside pardes nothing changes. --help, docs/fs.md, the README and the 9P skill say to set EDITOR='pardes --wait', which GIT_EDITOR follows. Tested in fs.py (it returns within 50 ms of the Del, a second -w waits on the same pane, one whose session is killed exits 1) and end to end: fish 4.8 in a detached session, echo hi, Ctrl-O, the waiting launch idle in poll, the line edited over 9P, Save, Del, and fish ran echo edited. Co-Authored-By: Claude Opus 5.5 <[email protected]>
generated by cgit v1.3 (git 2.53.0) at 2026-10-02 09:03:33 +0000