| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
| |
Truncating the tag file replaced its text without an undo point, so the
cleared text was gone for good. It is recorded now like a typed edit, the
history is kept, and docs/fs.md says so.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
| |
Teardown freed the body's undo by hand beside the tag's deinit, and the
prompt line's characters by hand too; the three texts now go the same way,
so what a Text owns is freed in one place.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
| |
A column's or the workspace's tag has no pane, and asking one for it hit
unreachable; every caller guarded against that by checking `what` first.
An optional makes each caller say what it does without a pane, so a
forgotten guard no longer compiles into a crash.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
| |
The space between a pane's path and its commands belongs to the tag's own
text, so deleting it, or truncating the 9P tag and writing `Get`, ran the
path and the word together for Look and Exec. The prefix now adds a space
whenever the text does not start with one; every default text does, so the
default tags read and render as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
| |
A tag shows at most eight rows, so a longer one (a 9P write of many lines, or
`o` in the tag) put its caret on a line that was never drawn. Pane, column and
workspace tags now keep a first line on screen that follows the caret while
they have the keyboard, and the pointer and the pane text count their rows
from it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
With tags reduced to Texts, what is left of them is the computed prefix, the
default and saved tails, entering and leaving a tag and the headers: that goes
to tagline.zig, as acme keeps the tag half of a window in wind.c. Tag and
header drawing moves next to body drawing in body_layer.zig, and the tag hit
helpers go to tag_layer.zig with the Hit they read, where sameCell now also
tells the lines of a taller tag apart. The docs describe the tag as a Text.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
| |
A header is a Text like a pane's tag, so a newline typed or pasted into it
should show rather than hide the lines after the first; the panes below move
down to make room, as they do for a taller pane tag.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
A tag that is a text can hold a newline, and the tagline, the body under it
and the pointer all assumed one row. The pane's tag now takes a row per line
(up to eight, and never the body's last row); the body starts below it, the
rows a pointer counts start the body after the tag's lines, a click on any
line puts the tag's cursor there, and a pixel shell gets a tag layer per
line. A tag of one line draws exactly as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The headers had their own one-line editor with its own keys: Enter always
executed, h/l and J/K moved between headers and panes, Ctrl-c/x/v cut and
pasted, and TagLine refused a newline that 9P accepted. They are now Texts
like a pane's tag, with no prefix and a default until edited, so normal and
insert mode, undo and the look and execute keys are the body's. Moving
between them is the window keys' job: Up from a pane with nothing above it
reaches its column's tag and then the workspace's, Down comes back, and
Left and Right walk the column tags.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The tag was a fixed buffer with its own one-line editor, a cursor measured
across the path, and a hijack of the body's mode while it was typed into.
It is now the pane's second Text: its own characters after the computed
prefix (path, dirty marker, PDF page), which is never stored in it, so a
rename or a dirty marker never moves its cursor. Normal and insert mode are
the body's, undo included; `:` moves the keyboard between body and tag, the
tag remembers its cursor and starts on Save, and executing a word from it
hands the keyboard back. The mouse still sees the prefix: a sweep selects
across it and a click on the path drafts a new name.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
A search, pipe or Save prompt wrote its marker and answer onto the end of
the tag, so the tag's cursor, its selection, its 9P writes and a prompt
abandoned by a click all shared one buffer: the abandoned text stayed in
the tag and a 9P write landed inside the prompt. The answer is now its own
Text on the pane, typed in insert mode and shown on the notice band where
it was already drawn, and the tag never holds any of it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
acme keeps what edits a text in its Text (dat.h:171-190) and the window
holds a body and a tag of that type. The cursor, the selections, the modal
state and the edit-buffer undo move off Pane into Text.zig, Pane holds
them as its body, and the edit and normal-mode operations take the Text
they edit. Nothing changes in behaviour; this is the step that lets the
tag become a second Text.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Documentation only, no code change: README's reading order and layout,
docs/design.typ's paragraph on where pane kinds and editor parts live,
docs/helix-keys.md's code map (normalInput and the executors now in
normal.zig and edit.zig, insertTab in edit.zig), docs/open-questions.md
(execute and ttyForDir in exec.zig), and the comments that named pardes.zig
for fold, Cell, takesCommandLine and runBuiltin (tools/gen_themes.zig,
themes/helix.zig, detached/wire.zig, host_io.zig, lsp_zls.zig).
docs/design.pdf is a retained fixture and is not regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Not a pure move: state moves. Pardes's `pipe_seq` and `pipe_wait` become
Pipe.zig's own fields `seq` and `wait`, and Pardes embeds one as
`pipe: Pipe = .{}`. pipeRequest reads only the request in flight, so it now
takes `pipe: *const Pipe` and the four shells call
`core.pipe.pipeRequest(id)` (their Pipe imports go away again); the other
pipe functions still need the panes and keep `p: *Pardes`, writing
`p.pipe.seq/wait`. Field reads in dump.zig, the shells' tests and two test
files follow (`core.pipe_wait` becomes `core.pipe.wait`). No behaviour
change.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change: the editor half of `|` that the earlier
change put at the end of selection_pipe.zig (PendingPipe, pipeMarker,
submitPipe, pipeRequest, pipeFailed, pipeCut, pipeOutput, pipeResponse,
and the eight pipe tests with nextPipeEffect) now lives in its own
Pipe.zig, so the pipe's editor state can become Pipe's own fields next.
selection_pipe.zig goes back to exactly what it was before this series: the
native runner and the boundary values the shells hand to their workers.
The moved code names the runner's types as `selection_pipe.X` again, as it
did in pardes.zig; callers change from `selection_pipe.submitPipe(p, ..)`
to `Pipe.submitPipe(p, ..)` (pardes.zig and the four shells).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Not a pure move: state moves. Pardes's three message-log fields
(`messages: [message_log]LoggedMessage`, `messages_head`, `messages_len`)
become the fields of Messages.zig itself (`log`, `head`, `len`), and
Pardes embeds one as `messages: Messages = .{}`. messageLog reads only the
ring, so it now takes `m: *const Messages` and is called
`p.messages.messageLog(i)` (Output's +Messages view and the log test);
logMessage still needs the panes and the 9P event log, so it keeps
`p: *Pardes` and writes `p.messages.log/head/len`. No behaviour change.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change (acme keeps dump and load in rows.c):
dumpState, restore, initFromDump and initDump go verbatim to the end of
dump.zig, after the dump format they read and write. Inside dump.zig the
moved code's `dump.` prefix drops, so `Pane` there is the dump record; the
one editor pane it names is spelled `pardes.panes.Pane`, and its other
`panes.X` references become `pardes.panes.X` because dump.zig's own tests
use `panes` as a local name.
The methods become free functions taking `p: *Pardes`: `p.dumpState()`
becomes `dump.dumpState(p)`, `core.restore(bytes)` becomes
`dump.restore(core, bytes)` and `Pardes.initFromDump(..)` becomes
`dump.initFromDump(..)`, in pardes.zig, the shells, layout.zig,
Terminal.zig, builtins.zig and the tests (38 receiver rewrites plus the
initFromDump calls). The tag-tail restore helpers stay with the tag code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change (acme keeps this in exec.c): execute,
commandText, max_exec_depth, executeBuiltinLine, applyStartupConfig,
runBuiltin and applySettingBuiltin; the getarg-style operand code
(withArg, PointerOperand, pointerOperand, heldSelection, chordEachSel);
takesCommandLine and the terminals commands run in (spawnTty, spawnV9fsTty,
spawnTtyWithMount, evictLonePristineTty, replaceStillborn, ttyForDir);
placeDoc; and the save path (submitSave, saveFile, saveTo, askWrite), with
the acme-chords test, go verbatim to exec.zig.
The methods become free functions taking `p: *Pardes`. executeBuiltinLine
is called from ~170 places as `p.executeBuiltinLine(..)`, so Pardes keeps
one declaration alias for it and those call sites stay; the other 104 calls
change from `p.execute(..)` to `exec.execute(p, ..)`. ninep/ctl.zig has a
local named exec, so it writes `pardes.exec.execute` instead of importing
the file.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change (acme keeps this in look.c): expanding the
word under a click (ExpandedWord, expandedWord, expandedSel, cursorWordSel),
the n/N walk (LookFrom, lookEdge, lookStand, lookWalkPanes, lookPast,
wholeRowSpan, lookSpanIn, lookWalk, landLookSpot, noteLookSource,
armLookWalk), search results (Search, SearchStart, submitSearch,
lookFirstHit, runSearch, searchStep, jumpResult), the look-hover preview
(LookHoverWait, LookHoverPreview, FileWordSpan, PdfWordPreview,
invalidateLookHover, cancelLookHover, lookHoverPane, noteLookHover,
refreshLookHoverFromRaw, advanceLookHover) and lookAt with its targets
(focusPaneLine, selectSpan, openPaneTarget, focusPaneByPath,
clearNavigationSelection, resolveLookTarget, locationText,
canonicalLookLocation, pdfLinkLocation, followPdfLink), with five tests, go
verbatim to the end of look.zig after its word and target resolution.
The methods become free functions taking `p: *Pardes`; their 143 call sites
change from `p.lookAt(..)` to `look.lookAt(p, ..)` (tests reach them as
`pardes.look.x`). Inside look.zig the moved code's `look.` prefix drops.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A look's answer is the pane it opens or the place it jumps to; its own name
on the message row was only noise over that. Look now declares
`pub const quiet = true;`, like Msg, so runBuiltin skips the announcement.
A registry test checks that Look is quiet and Del still announces.
23 snapshot goldens drop the "Look" chip from the message row and nothing
else: chordcut find hscroll images jumps layout-open look-center look-dir
look-file look-file-1col lookloaded lsp lsp-client lspcomplete lsprelpath
psearch stepgrain syntax tag tagbottomimage tagnav ttylook ttytaken.
Updated with --update --jobs=1 on exactly those scripts; every changed row,
compared screen by screen against the old golden, differs only by the
blanked chip (and its style runs), and two full snap runs after the update
pass.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change: handleMouse with dragUpdate, dragRelease,
seamIdxAt, reportGesture, gestureRange, dispatchPointerBuiltin,
mirrorTtySelection and chordCutPaste, the pointer hit helpers
(bodyHitForPane, sameTagCell, tagColumn, sameBodyCell), chromeTarget with
ChromeTarget, paneAt, the Drag state type with clampBorderCol/Row, the seam
test fixtures and thirteen pointer and drag tests go verbatim to mouse.zig.
The methods become free functions taking `p: *Pardes`; their 36 call sites
change from `p.handleMouse(..)` to `mouse.handleMouse(p, ..)`, including
web.zig's chromeTarget and macos.zig's paneAt. The Mouse event type stays
in pardes.zig with the rest of the event vocabulary.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change: the key-to-role matching (isPrefix,
roleBindingName, normalInput), multiOnce, the selection regex prompt
(startSelRegex, selRegexArmed, applySelRegex), KeyState, Replay and
replaySels, handleNormal, executeNormalAction and handlePdfNormal, with two
tests, go verbatim to normal.zig.
The methods become free functions taking `p: *Pardes`; their 22 call sites
(handleKey, the mouse, look walk, lsp, runBuiltin, body drawing and edit.zig)
change from `p.handleNormal(..)` to `normal.handleNormal(p, ..)`.
test/lspbench.zig's second anchor follows its needle into src/normal.zig.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change (acme keeps this in text.c): which text a
pane edits and how it maps to the screen (editText, editTextEol,
setEditText, paneCursorLines, paneByteAtDisplay, pinPaneCursor,
flatSurface, paneWrapWidth), insert mode (enterInsert, handleInsert,
insertKey, insertTab, exitInsert, clampFileCursor), the d/c/y/p edit
operations with replace, case, join, indent, comment, number, textobjects
and surround, undo and redo, yank/clipboard/paste (setYank, setClipboard,
ClipRequest, clipRequest, typeToTty, applyPaste, clipYank), and the pointer
selections as text (PointerTextSelection, pointerTextSelection,
capturePointerSelection, paneText, pointerSourceLine, selectionText,
spanHas, currentSelText), with four tests, go verbatim to edit.zig.
The methods become free functions taking `p: *Pardes`; calls change from
`p.insertKey(..)` to `edit.insertKey(p, ..)` (pardes.zig, body_layer.zig,
selection_pipe.zig, builtins.zig, test/hxdiff.zig, test/perf.zig). In
executeNormalAction the `.edit => |edit|` capture becomes `|op|`, since it
would now shadow the edit import. test/lspbench.zig's first anchor follows
its needle into src/edit.zig.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change: renderBody, renderBodyLayer,
paintPointerSelection, paintSourceSelection, paintTerminalSelection and
bodyText go verbatim to the end of body_layer.zig, which already held the
body's layer geometry and hit-testing, so the pane body as the surface shows
it is one file. The file doc now says so.
The methods become free functions taking `p: *Pardes`; their 16 call sites
(render and renderPane, the tag painter, selection and dump code) change
from `p.renderBody(..)` to `body_layer.renderBody(p, ..)`. pardes.zig gains
`pub const body_layer = @import("body_layer.zig");`; pointerSourceLine,
selRegexArmed and cellBounds become pub because the moved code calls them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change: the Message stamp helpers, LoggedMessage,
setStatus, setMessage, showMessage, dismissMessage, dismissLine,
advanceMessages, advanceLine, messagesAnimating, MessageMotion,
messageFrames, messageMotion, noticeText, noticeLife, blendRgb,
logMessage, messageLog, reportError, the notice painters (leaderText,
noticeCols, Printed, printRight), collectNotices, and the six message
tests go verbatim to Messages.zig.
The methods become free functions taking `p: *Pardes`. setStatus,
setMessage and reportError are called from ~170 places as `p.setMessage(..)`,
so Pardes keeps three declaration aliases (`pub const setMessage =
Messages.setMessage;`) and those call sites stay as they are; every other
call changes from `p.x(..)` to `Messages.x(p, ..)` (46 of them). The five
shells' `pardes.Pardes.Message` become `pardes.Messages.Message`. The
message ring's fields stay on Pardes for now; moving them into Messages is
a separate change.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change: submitPipe, pipeRequest, pipeFailed,
pipeCut, pipeOutput and pipeResponse, the PendingPipe they share,
pipeMarker, and the eight pipe tests with their nextPipeEffect helper go
verbatim to the end of selection_pipe.zig, so the whole of `|` (runner,
boundary values, prompt, request and atomic edit) is one file. Inside that
file the `selection_pipe.` prefix drops; the file doc now says it holds both
halves.
The methods become free functions taking `p: *Pardes`: the four shells'
`core.pipeRequest(id)` become `selection_pipe.pipeRequest(core, id)`, and
pardes.zig's two calls change the same way. pushUndo becomes pub because
the pipe's edit calls it; PendingPipe.deinit becomes pub for Pardes.deinit.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change: the Theme type, the curated palettes,
fold and the themes ring with its two comptime checks, themeContrast, mix,
ChromeTheme, ChromeAnimation and initial_chrome, the Pardes methods that
load theme files and switch themes (nextThemeFileGeneration,
requestThemeFile, ThemeFileRequest, themeFileRequest, failThemeFile,
loadThemeFile, finishThemeInitialization, invalidateThemeDependentRasters,
setThemeIndex), and the ten theme tests go verbatim to colors.zig.
The methods become free functions taking `p: *Pardes`; their call sites
change from `p.setThemeIndex(i)` to `colors.setThemeIndex(p, i)` (37 of
them, in pardes.zig, builtins.zig, file_watch.zig, macos.zig and two test
files). pardes.zig keeps `pub const Theme/themes/native_theme_count/
ChromeTheme = colors.X;` for the shells that name them, and sync and
enterTagEdit become pub because a moved test calls them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move: Color, FontRole, CellStyle, Cell, AsciiDiff, PanelCellDiff,
ImageCacheKey, NativePlacement, ImagePatch, ImagePlace and Surface, with
their eight tests, go verbatim to the new surface.zig with the imports they
use. pardes.zig keeps one `pub const X = @import("surface.zig").X;` line
per type, as it already does for Pane, Rect and the tag layers, so the
shells' `pardes.Cell` / `pardes.Surface` spellings do not change.
Surface.print, clearRect and overlayDash become pub because render calls
them from pardes.zig. surface.zig is added to pardes.zig's test block and
to the embedded source list.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
Pure move: the body of `pub const Pdf = struct { ... }` is now the file
pdf_view.zig, dedented, with the imports it uses; panes.zig keeps
`pub const Pdf = @import("pdf_view.zig");`, so `panes.Pdf.x` callers are
unchanged. The file is not Pdf.zig because pdf.zig (the MuPDF module) sits
beside it and the two names are one file on a case-insensitive disk.
pdf_view.zig joins the embedded source list.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
| |
Pure move: the body of `pub const Terminal = struct { ... }` is now the file
Terminal.zig, dedented, with the imports it uses; panes.zig keeps
`pub const Terminal = @import("Terminal.zig");`, so `panes.Terminal.x`
callers and Pane's `Terminal.State` field are unchanged. Terminal.zig
joins the embedded source list.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
| |
Pure move: the body of `pub const File = struct { ... }` is now the file
File.zig, dedented, with the imports it uses; panes.zig keeps
`pub const File = @import("File.zig");`, so `panes.File.x` callers and the
`File.State` field of Pane are unchanged. File.zig joins the embedded
source list.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
Pure move: the body of `pub const Output = struct { ... }` is now the file
Output.zig, dedented, with the imports it uses; panes.zig keeps
`pub const Output = @import("Output.zig");`, so `panes.Output.x` callers
are unchanged. decorateRow and RowDecoration.styleAt become pub because
File calls them from another file now. Output.zig joins the embedded
source list.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move: the body of `pub const Image = struct { ... }` now sits at the
end of image.zig, dedented, under a "the image pane" banner, so the image
thing (decoding, glyph art, and the pane that shows it) is one file. Its
nine `image.X` self-references lose the prefix; image.zig gains the four
imports the pane code uses. panes.zig keeps `pub const Image =
@import("image.zig");`, so `panes.Image.x` callers are unchanged.
image.zig joins the embedded source list, since the pane code left
panes.zig which was on it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
| |
Pure move: the body of `pub const Mini = struct { ... }` is now the file
Mini.zig, dedented, with the imports it uses; panes.zig keeps
`pub const Mini = @import("Mini.zig");` so every `panes.Mini.x` caller is
unchanged. Output.resetBody becomes pub because Mini calls it from another
file now. Mini.zig joins the embedded source list in fs.zig.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
shut down
The held read is now kept by the Ticket cloud9's Conn.hold() gives its
park and answered through Conn.answerWith(), which makes the answer only
while that very park still waits, instead of walking the engine's slots
by tag; pardes no longer reaches into the engine for it. A second read on
an open whose read is held fails with file in use rather than sitting
parked where nothing answers it, and a read that waits with no open
record to hold it is logged and asserted on. A read on an event or
pty/data open whose pane closed answers acme's "window shut down"
(editors/acme/xfid.c:1005). The pane keeps its run's and its lock's open
handles, checked through openOf on use, not record indices. Docs: lock
from a shell needs a held fd, and a command that clears the screen may
read as cut.
Needs cloud9 zvuqvnzy (cca47d63), which adds Conn.hold, waiting and
answerWith; build.zig.zon still pins 82d8152c until that is pushed and
re-pinned.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
A clear or reset while the command ran, a start or end mark that came on
the alternate screen, or a garbage end pin read as a complete answer;
now any of them, like a start that scrolled out, answers exit N cut.
The output is read from at most output_rows rows above its end instead
of the whole history on the editor's thread (cut if that clips it), a D
with no status answers exit ? rather than exit 0, and running out of
memory answers error out of memory rather than cut.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
A client doing an edit of several writes to addr and data had no way to
keep another client's from landing in between. acme's window ctl takes
lock and unlock for this (editors/acme/xfid.c:603-611): a qlock that
blocks a second locker, owned by the fid that wrote it and given up when
that fid is clunked, binding only clients that ask. pardes does the same:
the open's record holds it, a second lock parks until unlock, close or
the pane closing, and no other write is refused for it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Snapshots (and /log's cursor), runs, and the reader_handle constants for
event and pty/data each reused the open handle and each validated
handle and node on its own. Now p.fs.opens is one table of 64 records,
each the node it was opened on and a tagged union of what it holds, like
lib9p's per-fid aux and acme's Fid (editors/acme/dat.h:373-385): one
lookup (openOf), one release, ENFILE when full. A held read lives in
its open's record, so it goes with the release. Opens that hold nothing
answer handle 0 and take no record.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
addr, limit, the event queue and its readers, pty/data's queue, a waiting
run and the /log announcement flag lived in p.fs.panes[slot], reset when
the pane went; a reused slot is how the bug class came in. acme keeps the
same state on its Window (editors/acme/dat.h:226-266), so now Pane.fs
holds it: announced, retired (noteRetire, which still answers a waiting
run and drops the listener count first) and freed with the pane itself.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
A following log, event, pty/data or a pty/run before its answer used to
answer .again and wait for a wakeAll, which only the parked-write path
asked for, so the band-aid had every queue push set turn.parked. Now the
core keeps such a read (ctlfs.hold) and, as the turn is given up after
anything that queued a record, ran a command out or closed a pane,
answers it on its own connection, the way factotum answers the log reads
it keeps and acme an event read. Only a read the engine still holds
parked is answered, because cloud9 tells the backend nothing of a
Tflush, so a flushed read spends no record.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
| |
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
and E.BUSY
The answer is now the header line (exit N, or exit N cut M when only the
last 64 KiB were kept, or exit N cut when its start scrolled out of the
history), then what the command printed: the screen text between its C and
D marks, which the marks handler pins so scrolling keeps them.
Also from review: a plain /log open honours its offset until follow is
written, so tail -n and less work; whitespace-only run lines are refused.
cloud9 is pinned at 82d8152c: 9ns keeps up to 32 requests in flight per
mount so a waiting read no longer freezes the rest of it, and E.BUSY
replaces the errno pardes spelled locally.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Review fixes to pty/run and /log:
- Both are streams with a per-open cursor. A shell's exec 3<>file shares
one offset between write and read, so cat <&3 after echo make >&3 asked
for offset 5 and got "0" instead of "exit 0"; log after follow lost its
first bytes the same way.
- A run is accepted only in pardes's own tagged input phase, so a nested
shell's prompt (ssh, a shell with its own integration) is never taken for
this shell's.
- A line the shell refused is taken back so the next finds the prompt
clear: bash's continuation prompt (now tagged k=c) gets Ctrl-C and the
answer waits for the fresh prompt; a bash syntax error (no C, but a D) is
answered at once; fish's kept line gets Ctrl-U (a Ctrl-C sent while fish
redraws is lost). fish's right prompt no longer reads as typed input.
- bash marks a command's start from PS0 on bash 4.4+, not a DEBUG trap, so
a user's own DEBUG trap (bash-preexec, atuin) survives. bash's own job
notices now show as in plain bash (ttyfollow golden).
- 32 run slots; a new line on an open starts a fresh answer.
Checked live in bash, fish, and fish with a right prompt.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
/pane/<n>/pty/run takes factotum's rpc shape: write one line on an open,
read the answer on that same open. The answer is exit N once the command
ended and the shell is back at a prompt; busy at once when a command runs,
text is typed at the prompt, or the shell has not drawn its first prompt;
error not run when the shell refused the line without running it (fish on
a syntax error keeps it on the prompt, so it is taken back with Ctrl-U);
error shell gone when the pane closes or its shell is replaced; error no
prompt marks for a shell pardes could not instrument.
The end comes from the shell's OSC 133 marks. ghostty parses D's exit
status and drops it, so the stream now runs through a handler that wraps
ghostty's and follows prompt -> input -> running -> done. The marks pardes
injects into bash and fish carry aid=pardes and only those count, so fish
4's own marks (which doubled ours), a nested shell's, and a stray 133;D in
printed output are ignored.
Checked end to end against real bash and fish: false, exit 7, a syntax
error, sleep, busy while running, and the pane closing mid-command.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
file; pty/ctl reads back
A read parked on a queue was retried only when some unrelated write had
to wait, so a follower of /log (and a reader of event or pty/data) slept
until then. Pushing a record now marks the turn parked, and giving the
turn up wakes them (measured: stuck past 3 s before, 0 s after).
event and pty/data consume what they read, so a second open for reading
is refused with rio's "file in use" (EBUSY through 9ns); writers still
get in, and pty/data queues output only for an actual reader. pty/ctl
reads back "winsize C R", in the words it takes.
/log fixes from review: a record longer than a read comes in pieces (a
shell read loop failed on long lines), every repeated message is logged,
a record bigger than the ring is cut to fit instead of emptying it, the
ring is reserved at boot so recording never allocates, and panes present
at boot are recorded first.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
/log is now one ring (64 KiB, 4 KiB on the board) that records new, del,
rename and save, and a msg line for everything the editor says. An open
freezes it, so cat log shows what happened lately and ends; writing
follow to that same open makes reads past it wait for newer records, and
a follower the ring outran reads lost N first.
The message log keeps the pane's serial, not its reusable slot.
A test now fails when the tree serves a file /README never mentions; it
caught pty/status, now documented along with typing through pty/data.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
| |
bash and fish now print OSC 133;D;<status>, which ghostty already parses;
the planned /pane/<n>/run file reads it to answer when a command finished
and how.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
the pane a directional Del grows
A pane that joins a column whose only other pane is an untouched empty
scratch (Newcol's, or the stand-in a closed column leaves) takes the column
whole. Checked at the end of the step, since the pane that asked for the
joiner is often the placeholder itself.
Del k|j focuses the pane that took the rows.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
| |
The five arena buffers are zeroed globals instead of undefined fields, so a
Debug build keeps them in .bss rather than writing 160 MB of 0xAA filler
into every binary (Debug pardes 839 MB -> 246 MB).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Any new glyph re-uploaded the whole 2048x2048 atlas: 4 MB copied into the
transfer buffer and then to the texture, about half a millisecond of CPU on
the frame, and the GPU's copy on top. Glyphs fill the atlas pen-style, a band
of rows at a time, so a frame's new glyphs sit in a band a cell or two tall.
The atlas now keeps the rows drawn into since the last upload (cachedGlyph
widens them by each raster's rows: plain glyphs, ligature strips, tagline and
grip glyphs alike), and uploadAtlas copies and uploads just those rows, at the
same offset in the transfer buffer as in the stage; the texture keeps the
rest. A reset (a font, size or tagline change) marks every row, as
the texture's first upload does, so those still send the whole atlas. A test
replays uploads over glyphs of every kind and a reset, and checks that no row
outside the dirty rows ever differs from what the texture holds.
Hidden captures of 27 layouts, including new glyphs typed and printed, font
and size switches, and Ligatures off and on, are byte-identical to before.
Over 10 interleaved rounds (160x50 cells), a frame that draws new glyphs
spends 12-50 us uploading instead of about 0.5 ms: a terminal printing twelve
new glyphs a line goes from 1.04 to 0.55 ms of renderFrame CPU on such frames
(-34% over the scenario's frames, 9 of 10 rounds faster, -20% to the GPU
fence), a typed glyph's frame from 0.89 to 0.38 ms, and opening a file of 600
new glyphs from 9.1 to 8.7 ms. The first frame and a font size change still
upload everything and cost what they did; other frames are unchanged.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
|
