summaryrefslogtreecommitdiff
path: root/docs
Commit message (Collapse)AuthorAge
* A pane from pane/new is the session's directory's scratch, not the last ↵Gabriel Schneider3 days
| | | | | | | | | | active pane's No pane asked for it, so borrowing the directory of whichever pane last had the keyboard named it after an accident; acme's new window has acme's directory. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A pty/ctl winsize gives a terminal two rows at least, so it no longer reads ↵Gabriel Schneider3 days
| | | | | | | | | | | | busy for ever A one-row pty loses the prompt's input mark as soon as the prompt wraps, and busy detection never sees the shell idle again. Placement already keeps a new terminal at tag + 2 rows; a winsize write now keeps the pty at two. A pane dragged down to one body row keeps a one-row pty, since a taller pty than the pane shows would put its cursor below the pane. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A new pane with no room under the last goes last all the sameGabriel Schneider3 days
| | | | | | | | | | | | | A pane from pane/new or New takes the bottom half of its column's last pane, as acme's coladd does (cols.c:62-65); when that pane is too short to give it a tag and 2 rows, the fallback halved the tallest pane and put the new one under it, mid-column (the 7 9 8 found). It now goes last all the same, with half the tallest pane's rows (its tag measured at the column's width). Tty from a pane's ctl already follows acme's makenewwindow (the active column first, util.c:456-467); fs.md now says so rather than beside that pane. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* @p<serial>:<address> takes any sam address, as file:<address> doesGabriel Schneider3 days
| | | | | | | | | | @p<serial> took a line spot but an address after it (/re/, #n, $, 0/re/, a range) was dropped, the name failing the file check, and an unknown serial fell through to a search. The pane is now addressed like a file; a miss and a serial no pane has each log an err, and look reads back empty. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* One rule for failing builtins: the write fails, one err, no msgGabriel Schneider3 days
| | | | | | | | | | | | | | | | A builtin that failed through a ctl failed the write and logged its err, but through look, exec, tagexec or a column's exec it only said so on the message row, logged as a msg, and the write succeeded. Now every click write runs its builtin as a ctl line does (ctl.captured): a failure fails the write, with its words (EINVAL for malformed input, else EIO or what the words name), logs one err and no msg or announcement. get's Modified and a look miss are shown but logged once, as their err. A control character's refusal names its reason, a failed click reads back nothing, and look never reads back a pane closed since. The special case for a cut-short Edit through exec goes (the rule covers it); fs.md's table of exceptions becomes the one rule, as does the skill. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs: which writes fail, mark for one undo step, directory looks, the ↵Gabriel Schneider3 days
| | | | | | | | | | | | | | skill's log line Round 15's doc findings: one table of which files fail a write and which only say so; mark to make a loop's data writes one undo step; the 100-byte scratch exemption and the chord write-back in the skill; the skill's log line with ask, answer, changed, newcol, delcol and the restored records; a directory looked at opens a terminal that runs ls, and why; a plain word in a terminal is listed in +Search, its rows @p<serial>. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A prompt a 9P request opens is an ask, answered with answer, never stackedGabriel Schneider3 days
| | | | | | | | | | | Save through exec on a terminal (or a scratch) opened its path prompt on screen, where no script could see or answer it, and a second Save stacked another. Opened while a 9P request is served, it now logs ask <serial> save path; answer <path> on the pane's ctl saves there and closes it, answer - closes it; asked again, the open one stands. A pane closed with it open logs answer <serial> -. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Newcol at the column cap says so, and a desktop session holds 16 columnsGabriel Schneider3 days
| | | | | | | | | | | Newcol with every column slot taken, or a column too narrow to split, did nothing and said nothing. It now fails (a ctl write with it) with no space for a column: 16 max (ENOSPC through 9ns), or that the column is too narrow. MAX_COLS is 16 on a desktop, 6 on the board; each column costs about 8 KB of core state (the Pardes struct grows from 1.47 MB to 1.56 MB), most of it its tag's text. fs.md and the skill give the cap. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A chorded record written back with its two follow-ups runs once, with its ↵Gabriel Schneider3 days
| | | | | | | | | | | | | argument Writing a chorded exec's three records back as read ran the argument and its location as shell commands. The first record (flag 8) now takes the next record as its argument when it comes in the same write, else the one kept from the click (or, with none kept, waits for it); its two follow-up records, however they are written, are consumed as its, never run. Tested written back together and one per write. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs: the raw paste's second Enter, event flags and write-back, a new ↵Gabriel Schneider3 days
| | | | | | | | | | | | | Tty's ls Round 14's doc findings: a raw pty/data paste of more than one line needs the second \r unless it ends in a newline (not only an indented last line); the event flag bits (1 builtin, 2 expansion, 4 filename, 8 chorded, with its two records) and what writing back each record kind does; why a new Tty types ls; and the sam box's N+1 for text without a final newline (out of range). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* follow new: a log follower that starts at the endGabriel Schneider3 days
| | | | | | | | | A follower read the ring's whole history before anything new, and there was no way to skip it. Writing follow new instead of follow skips what the open froze and waits for what comes after (tail -n0 -f); fs.md and the skill say that follow replays first. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* /commands says what each word does, and that the root's ctl takes EditGabriel Schneider3 days
| | | | | | | | | | | A /commands line gave a word, its argument and root or pane, but not what it does, and called Edit a pane's word though the root's ctl takes it too. Each line now ends with -- and the first sentence of the word's doc comment (read from builtins.zig itself, so there is one copy), and Edit is both. fs.md says a pane's word such as Undo or Msg is refused at the root. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An a, c or i text with no . line fails the Edit, as an open { doesGabriel Schneider3 days
| | | | | | | | | | sam takes the end of input as a text block's end, so a block cut short (a write that lost its tail, an open closed early) inserted half of itself. An Edit whose a, c or i text never meets its . line now fails with "a, c or i text not ended by a . line" and changes nothing, as an unclosed { does; at a close, logged as an err. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A pane has a tagexec: a word run as a click in its tagGabriel Schneider3 days
| | | | | | | | | | The workspace had /tagexec and a column its exec, but a pane's own tag could be clicked only by an event record. pane/<n>/tagexec runs each line as a click in that pane's tag (never redirected to its event reader, as a header's is not) and reads back what it touched. The README, fs.md and the skill list it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A looked word selects its next place in its own pane, as acme's look3Gabriel Schneider3 days
| | | | | | | | | | | | | | A plain word looked at (a look write, a right click, an ML record written back) opened another identically named +Search pane each time, until the panes ran out, and never wrapped. As acme's look3 searches the text for it (look.c:210), it now selects the word's next place in that pane after the dot, wrapping at the end, and opens nothing. LookWord list, a new root setting, keeps the +Search listing (search is the default); the rsearch snapshot and an output test that walk the listing say LookWord list. (The leader-path check over every builtin gets a comptime branch quota, as one more builtin took the GUI build past the default.) Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs: sam gotchas, Restore's log order and paths, stream reads, layout's ↵Gabriel Schneider3 days
| | | | | | | | | | | | | | | | | current and active Round 13's doc findings: a sam gotchas box in the skill ($-1 with and without a final newline, N+1 at the end, ^/$ at the end, 2,1, y's leading empty piece, c's literal &, columns from 1); the skill's Restore log order made the true one (new, restore, restored, restoredcol); a relative Restore path is looked for in DumpDir then the session's directory, and a bare one takes the last dump; a follower sees each (xN) as a new line; reading data or xdata moves addr; a second read of look/exec on one fd is EOF (re-open or seek 0); /layout's current (the keyboard's column) and active (acme's activecol) defined; no room, not no rows left; why a scratch's dirty blocks nothing under 100 bytes; the changed record listed. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A file changed on disk never reloads over unsaved editsGabriel Schneider3 days
| | | | | | | | | | | | | | | A watched file rewritten on disk was loaded over a buffer's unsaved edits and its dirty flag cleared, so Exit and Del no longer asked about them. A clean buffer still reloads; one with edits keeps its text and stays dirty, says <file> changed on disk (get reloads it, Save overwrites it), logs changed <serial>, and its Save warns once before overwriting the newer file, as acme's Put refuses a file modified since read (exec.c:577); get asks as ever (winclean, exec.c:513). The restored-watch test's dirty case now keeps the snapshot, and the filewatch snapshot script (re-recorded by name) checks both halves: the edited pane keeps its edit and says so, the clean one reloads. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs say what Restore renumbers and re-runs, what Tty takes, and how a ↵Gabriel Schneider3 days
| | | | | | | | | | | | | | | range reaches a REPL Round 12's doc findings: the README's ctl line gains Restore, Placement and size (still 45 lines, detail in fs.md); Tty's argument is a shell and Tty on a pane's ctl opens a new pane; a .py pane's range goes to its REPL as an MX<q0> <q1> event write-back; after a Restore panes are renumbered (columns count from 1 again, so often keep theirs), a command pane shows exit ? and does not re-run, and REPL bindings are gone. acme's p adds no newline to what it prints (ecmd.c:744, pdisplay), so pardes's p does not either. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A command run from a column's tag gets its pane in that columnGabriel Schneider3 days
| | | | | | | | | A command from a column's tag ran in a command pane at the foot of the last column, however far from the tag, and could reuse a finished one anywhere. It now goes to the tag's column, under both placements, and reuses only a finished command pane in that column. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Repl's unknown-language refusal names a few whole and points to the restGabriel Schneider3 days
| | | | | | | | | The refusal listed every language and was clipped to fit, ending mid-word. It now names six, those that start as the word did first (pithon: python), says how many more, and points at docs/tags.md, which lists them all. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* size says its limits, keeps every pane its rows, and ptys follow their panesGabriel Schneider3 days
| | | | | | | | | | | | size refused an out-of-range line without saying the range, took a size too small for the panes (leaving bodies of no rows), and a terminal squeezed to its tag kept a pty of its old size. The refusal now names 20x6 to 4096x4096 (a bare size is EINVAL like any malformed line), a size that would leave any pane less than its tag and 2 rows is refused and undone, and a terminal's pty is resized with its pane down to one row (only a folded or unplaced one keeps its grid). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Tty and Shell refuse a directory: not a shellGabriel Schneider3 days
| | | | | | | | | | A directory passes access(X_OK), so Tty /etc made a pane whose shell exited 127 and Shell /etc was taken. The shell lookup now refuses a directory, and both say "not a shell: /etc is a directory" (Tty and Shell share one refusal, host_io.Shell.refusal). shellset's golden takes the shared wording (re-recorded by name). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs give the full-column refusal, an Edit block left open at close, and ↵Gabriel Schneider3 days
| | | | | | | | | | | | byte columns Round 11's doc findings: the skill names the full-column refusal beside the 64-pane cap; fs.md and the skill say an Edit block still open when its open closes fails with unmatched { and an err; and line:col's byte columns get the tip for character columns from tools (the same on ASCII, else a search or #n). A unit test pins the unmatched { at close. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A detached session with no frontend takes its size from the root ctlGabriel Schneider3 days
| | | | | | | | | | A --detach session nobody is attached to stayed 80x24, too small for an agent's panes, and nothing could change it. The root ctl takes size <cols> <rows> while no frontend is attached (refused while one owns the size), and a client that attaches later still sets its own (the server compares with the core's size). Documented with the 80x24 default. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Words from the workspace and column tags run in the session's directoryGabriel Schneider3 days
| | | | | | | | | | A command or Tty run from the workspace tag or a column tag started in the focused pane's directory, though those tags have none of their own. As acme's row and column tags do, they now run in the session's directory, where pardes started (Pardes.sessionDir); a pane's tag and text keep the pane's. The same for /tagexec, a column's exec and ctl. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* +Errors with no room anywhere logs its text rather than fail the EditGabriel Schneider3 days
| | | | | | | | | Edit's p and = put their output in +Errors, and when its column had no room the placement refusal failed the whole Edit. +Errors now tries every column with room, the last first, and with none its text is logged as msg records, a line each; the Edit succeeds. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An exec line over 1024 bytes fails the write, naming the limitGabriel Schneider3 days
| | | | | | | | | | A command line longer than the 1024 bytes a command pane takes was said on the message row after the write had already succeeded. An exec write (the root's, a pane's, tagexec, a column's) now refuses it before anything runs, EINVAL with "a command line is at most 1024 bytes" and an err record; a builtin's line, a long Msg or an Edit block, is not limited. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A failed builtin's err replaces its msg, and (xN) is a running totalGabriel Schneider3 days
| | | | | | | | | | | A builtin failing a ctl write logged its Verbose announcement, its words as a msg, and the write's err, so the same failure again never repeated the newest record and never collapsed. Its err alone is logged now (the msg is still shown and kept in +Messages). A repeat of a record a follower has read is a new line with the running total, (xN) being N in all. fs.md states both rules. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Shell refuses a name that is no executable, and bare restores the defaultGabriel Schneider3 days
| | | | | | | | | | | Shell took any word and the host quietly ran another shell at the next spawn. It now refuses a path or name that is not executable ("Shell: x: no executable by that name", failing a ctl write, logged err), a bare Shell goes back to the default, and a default $SHELL that is not executable falls back to /bin/sh. shellset's golden takes the refusal on the message row (re-recorded by name). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Edit's x, y and s match whole runes, as addresses doGabriel Schneider3 days
| | | | | | | | | | | mvzr matches bytes, and only the addr path widened a match to runes, so ,x/./a/|/ on é split it into invalid UTF-8 and ,s/./X/g gave a combining sequence four X's. Edit's matches now go through the same rune alignment (and an empty match steps a rune, not a byte). runeStart no longer walks a stray continuation byte back onto the ASCII before it: an invalid byte is a place of its own. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs say sel is writable, Edit blocks may span writes, and sig INT stops ↵Gabriel Schneider3 days
| | | | | | | | | | | | a REPL sel's write was documented in fs.md only; the skill says it now. With command lines held per open, an Edit block may come in several writes (a shell's line-at-a-time printf), so the heredoc advice goes. Kill never stopped what a REPL runs, since pardes did not start it; the docs point at pty/ctl sig INT. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* No placement leaves a pane shorter than its tag and two rowsGabriel Schneider3 days
| | | | | | | | | | | | | | | | Placement could split a pane down to a tag and one row, or give a new one less. Every placement now checks the pane it made and each pane it shrank against its tag (wrapped at its width) plus two rows: where they lack the room, the column's tallest pane is halved instead, and where none can give it the new pane is refused with "no space for a pane in that column" (ENOSPC over 9P) and closed at the step's end, once its maker is done with it. splitBelow and splitParent leave two body rows (a boot layout, split before any row exists, is as before). Re-recorded by name: lookpanes (panes one or two rows lower) and splitparent (the 6-row squeeze now refuses); fs.py closes the scratches and long-named panes it no longer needs, since its 24-row session filled. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The default Shell is $SHELL, else /bin/shGabriel Schneider3 days
| | | | | | | | | | With no Shell set, pardes ran fish, which a box may not have and a user may not use. The default is now the user's login shell ($SHELL), else /bin/sh; an explicit Shell still overrides it. The tests pin their own shell (snapshots bash, the python suites /bin/sh or bash) and pass with SHELL unset; the Config report and docs say where the default comes from. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A read on a closed pane's event ends ENOENT, and the pane cap is ENOSPCGabriel Schneider3 days
| | | | | | | | | | 9ns reads an error's words, not its errno: "window shut down" came out as EIO where every other file of a gone pane gives ENOENT, and "no pane slots" as EIO. The event and pty/data reads a pane closed under now say "no such pane: its window shut" (ENOENT), and the cap says "no space for a pane: 64 max" (ENOSPC; 9ns has no word for ENFILE). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A pane closed with its question standing logs answer <serial> -Gabriel Schneider3 days
| | | | | | | | A follower that saw ask never heard the question end when its pane closed first. Retiring a pane with a question still up now logs answer <serial> - before its del. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A msg said again word for word is that line counted in the logGabriel Schneider3 days
| | | | | | | | | | 1000 Undos with nothing left made 2000 log lines: the Verbose announcement and the answer each time. A msg repeating the newest record is now that record counted, (xN), as err's already were (shared as pushCounting), unless a follower has read it; and a builtin's own words that start with its name take the place of its announcement just before them. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Undo and Redo with nothing left say so, and the write succeedsGabriel Schneider3 days
| | | | | | | | | A pane's Undo or Redo with no step left did nothing and said nothing. It now says "Undo: nothing to undo" (or Redo's) as a message, not a failure, so a ctl write of it still succeeds as acme's silent Undo does. The docs give the 256-step history. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* addr reads empty after a failed address instead of failingGabriel Schneider3 days
| | | | | | | | With no address after a failed write, a read of addr itself failed (EIO through a mount), which reads as a broken file rather than as no address. It now reads empty, as an unset limit does; data and xdata still refuse. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A limit write that fails keeps the limit it hadGabriel Schneider3 days
| | | | | | | | | A shell's > truncates limit, which lifted it, before the write; a write that then failed left no limit at all. The truncation now keeps the old limit until that open's write, and a failed write puts it back; a bare truncation still lifts it once its open is released. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Addresses snap to runes, not grapheme clustersGabriel Schneider3 days
| | | | | | | | | | sam and acme address runes; pardes snapped #n, line:col, dot and data's reads to grapheme clusters, so a lone combining mark or a CRLF's \r could not be addressed. #n, line:col, a search's match, dot (both ways) and data now land on rune boundaries (modal.runeStart and friends), and the tty's cell drawing is untouched. The README, fs.md and the skill say so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A line address past the last newline is sam's empty line thereGabriel Schneider3 days
| | | | | | | | | Forward line addresses followed acme's number(), which refuses the empty line after a text's last newline, so 1 of an empty buffer and 2 of "a\n" were out of range and Edit 1i/header/ failed on an empty file. They now follow sam's lineaddr (editors/sam/address.c:180-215): #0,#0 and #2,#2. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A command line cut across writes runs once whole, and look/exec answer per openGabriel Schneider3 days
| | | | | | | | | | | | | | | | A mount cuts a write at its message size, and each piece ran on its own: a line cut at the boundary ran as shell commands and a 50 KB Edit block broke. An open of look, exec, tagexec, any ctl or a column's exec now keeps an unfinished last line, or an Edit block still open, until its next write or its release, and never runs a fragment. The same open record holds what its last write touched, which a read on it answers (as /net/tcp/clone does); an open that never wrote reads the session's last as of its open. A release that runs a held line waits for quiet and counts as a change; a clicked line with a control character is still refused at its write. Tested in unit tests, fs.py (python client, 8 KiB) and selfmount.py (the kernel mount, a 1000-line seq burst and a 50 KB Edit block). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs say the errno that fits, Joincol's order, the pane cap, the paste's ↵Gabriel Schneider3 days
| | | | | | | | | | | | | | second Enter, a follower across Restore, and why wc waits Dogfood round 9's doc findings: ENOENT for a missing pane, file or dump is right, so the skill says EIO or an errno that fits; Joincol folds into the column on the right, the joined panes below its own; the skill gives the 64-pane cap; Python's second \r is needed only when the paste lacks a trailing newline; a log follower loses nothing within a session, but a Restore hangs it up; and a tag word gets no file argument, as in acme, so bare wc waits on stdin (pardes has no $%). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The workspace tag has /tagexec, every exec file reads back what it touched, ↵Gabriel Schneider3 days
| | | | | | | | | | | | | | and a tag's words log as the session's /tagexec runs a word as a click in the workspace tag, as col/<serial>/exec does in a column's. A column's exec was write-only; it and /tagexec now read back the serials the last write touched, as /exec does. A click in a tag no longer goes to the focused pane's event reader, and what a word run from a column's ctl or exec or /tagexec says is logged msg -, not against the focused pane. The README, fs.md and the skill say so, and document the answer record. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Kill stops a command pane's whole command, its & jobs includedGabriel Schneider3 days
| | | | | | | | | | With job control on, a command's & jobs get process groups of their own, so Kill's signal to the foreground group and the shell's group left them running, orphaned. A stop of a command pane now signals every process group in its shell's session (Linux; a /proc scan). Jobs still outlive a command that exits on its own. Docs and the skill say it per route. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* $ may end any alternative in a pattern, not only the lastGabriel Schneider3 days
| | | | | | | | | | mvzr refuses $ anywhere but at the very end, so /h$|zz/ and Edit ,x/r$|pi/ were bad patterns while /zz|h$/ worked. Its matcher already ends an alternative at .end, so a build-time patch, anchor-checked like the group one, lets $ stand before | and ). The upstream report is in docs/mvzr-group-backtrack.md. Co-Authored-By: Claude Opus 5.5 <[email protected]>
*-. Merge: 9P rounds 7-8 + layout files + loose ends + G3 cursorGabriel Schneider3 days
|\ \
| | * G3: the focused cursor glides a jump on the Motion flavour's springs, and blinksGabriel Schneider3 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The core owns the motion, as Lift: animation.CursorGlide keeps the focused cursor's four corners on springs (leading corners at the flavour's pace x2.4, trailing ones x follow, so a jump smears and collapses; a long jump bows by the flavour's arc), sampled at each frame's own time. A step of a cell or less, insert mode, a focus change and any scroll (a file's view, a terminal's output) land at once; a snap lands a glide under way too. The quad is clamped to the focused pane when drawn (never its springs). Chrome carries it on the wire (cursor_glide: bit 1 a cursor, bit 0 gliding; cursor_alpha; cursor_quad, grid cells; cursor_idle_ms): the GUI draws the quad as an overlay in the cursor's colour, at 85% (70% on the long flavours) rising to solid as it lands, and hides the cells' cursors while it does: one or the other every frame. Only the focused cursor glides. Blink (CursorBlink, on by default in pixel shells) is the shell's: from cursor_idle_ms and when the frame arrived, solid while typing and 500 ms after, 530 ms halves with 80 ms eased edges, solid after 10 s idle, and never while the window is unfocused or minimized or on a virtual clock. An edge redraws the last frame with no core render (level B, blink_redraws); an attached GUI blinks from the same field without a frame per edge. Tests: snaps a cell, glides a jump with smear and bow, arrives under a pixel by 150 ms on smooth and lands exactly, shifts with a scroll; blink holds, eases, stops; the core glides a jump (ge) frame by frame (gliding exactly while it moves, alpha rising, exact at rest), snaps a step (j) and a switch to insert mid-glide; a terminal's scrolling output lands its cursor; wire round-trip of the cursor record. Shared files: src/animation.zig, src/pardes.zig, src/config.zig (toggle CursorBlink), src/surface.zig, src/detached/wire.zig.
| * | The board image links again: sources are no longer embedded by default on ↵Gabriel Schneider3 days
| |/ | | | | | | | | | | | | | | | | | | | | | | | | esp32p4 uzksuumxruzr turned -Dembed-sources on for esp32p4 (before it, the board was the one build without them). The sources are ~1.8 MB against a 1.5 MiB app partition, so the object built but the firmware did not link: .flash.rodata overflowed by 786392 bytes and .flash.text by 1732312. Default off everywhere; -Dembed-sources=true still embeds them. Without them the image is 1459760 B, 113104 B under 1.5 MiB. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | The tree's README and fs.md answer round 8's doc questionsGabriel Schneider3 days
| | | | | | | | | | | | | | | | | | | | | | The README's log line names newcol, delcol, ask, restored and restoredcol; it says what $m is under 9ns --unix; and a build that embeds no sources no longer lists src/ (derived from the build, and tested). fs.md says what the rest of a typed line does after Kill for each shell (fish runs on, bash abandons it), that Exec <text> in a .py pane runs a command and never the REPL, and why appending to a tag wants printf and a leading blank. Co-Authored-By: Claude Opus 5.5 <[email protected]>
generated by cgit v1.3 (git 2.53.0) at 2026-10-03 22:48:30 +0000