| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
| |
A terminal's body came back as the screen's rows, a long line cut where the
terminal wrapped it and the last line with no newline. The body (and a
terminal's Save, and the length its ctl reports) now joins wrapped rows by
ghostty's wrap flags, as pty/run's output does, and ends the last line with
a newline.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tags wrapped one cell early to keep a cell for the caret past a full row,
so a tag that exactly filled its column broke as De / l. acme's frame wraps
a box only when it is wider than what the row has left, and frptofchar
clamps the tick past a full line's end to the frame's edge. Tags now wrap
at their full width; the caret past a full row sits at the tag layer's
edge, and on the pane's last cell in a terminal grid, which has none past
it. Two tiny-screen tests collapse their tags, as the others do, and the 41
goldens that moved were re-recorded by name after the same check: rows
shift back up under the shorter tags and nothing else changes. chordcut's
file-body clicks moved back with them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
| |
After Restore a dogfood agent's command panes were fish shells under a stale
`(make) exit 0` tag. The dump's terminal record now keeps a command pane's
line and status, and Restore brings it back done: what it printed, its exit,
no shell and no rerun.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
| |
A dogfood agent's `Tty bash` pane came back from Restore running fish: the
dump kept its directory but not the shell it was opened on. The dump's
terminal record now carries that shell (empty for the configured one, as
older dumps read), and Restore starts it again.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
A dogfood agent ran `exit 3` through pty/run: the reader got ENOENT, and
the log went straight to del. The hosts now read a shell's exit status at
its pty's end as they do a command's; a run waiting on the line answers
`exit 3` with what it printed, the log says `exit <serial> 3` before
the pane's `del`, and an open run still stats after its pane is gone
(cat fstats its input). Pins cloud9 f35b7ed, whose stat of an open fid names
its open. Writes to a gone pane's pty/data, held open or not, fail ENOENT.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
acme's frame wraps a tag at its right edge and the window grows to show
every row (wind.c wintaglines); Tagup/Tagdown shrink it to one row and back.
Pane tags used to be one row, scrolled sideways to the caret. Now a tag's
lines wrap at its width (one cell kept for the caret past a full row) and it
starts expanded; insert-mode Up on the first row collapses it, Down on the
last row expands it, and Alt-Up/Alt-Down do so in either mode. A word the
wrap breaks across rows is still one word to a click and a selection.
Column and workspace tags keep scrolling sideways.
Tests read body rows relative to the body's first row; the 41 snapshot
goldens that moved were re-recorded by name after a programmatic check that
each differs only by body rows shifting under the taller tags, and twelve
scripts whose clicks targeted fixed rows now click the same text.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |\ \ |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The painters of a pane's body and tag (renderBody and its selection,
gutter, syntax, ANSI and wrap-marker passes; paintPaneTag; paintHeaders;
renderPane; the image and PDF grid paths) take the Surface they paint as a
parameter. The body layer and the tag layers paint straight into their own
temporary surfaces, and the std.mem.swap of p.surface around those calls is
gone. No behaviour change.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
freed at one
The ranges beside the primary were an inline array in every Text, which at
1024 grew each pane by about 60 KiB. They are now allocated when a second
range appears (Text.reserveSels) and given back when the selection is one
range again (Text.dropSels); a column's or the workspace's tag allocates from
Text.gpa, any other text from its pane's. A refused tag edit restores them by
copy. The Pane size budget is back to 128 KiB, and a test holds that a single
cursor allocates nothing for them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
helix goto_last_modification: every range moves to the end of the last
change (the start of a deletion, the end of an insertion), extending in
select mode. The position is kept on the Text in surface rows, set where
setEditText hands a body its new text, so a terminal's typed text has one
too and moves with its scrollback.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The limit was 64 everywhere, which helix-golf's enumerate_and_align outgrows
(%s |\d+ makes 121 ranges). It is now memory.limits.selections, per platform,
and the counts that hold it are u16. The ranges stay inline in each Text, so a
pane grows by about 80 KiB on the desktop (three texts and the regex prompt's
snapshot); the Pane size budget in Terminal.zig moves from 128 to 160 KiB and
says why.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
read it whole
setEditText freed the text a tag edit was handed once it had copied the
tag's own part out of it, but every caller reads that text back to place the
cursor, and surround goes on to edit it again: ms and md in a tag read freed
memory. The same held for a terminal without an edit buffer and a text with
no pane. The text is now kept until the next such edit (edit.retireEditText),
which covers every caller at once; the callers the audit found reading it
back are surround's two, the paste and replace paths, the number adjust, and
the insert-mode Enter.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |/ /
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Insert mode dropped the selection on the first key and restored only the
primary's appended-over span on Esc. Now each insert-mode edit is made at the
bare cursor as before, and the range is then carried through it with helix's
Range::map rules: typing slides an i range and stretches an a range, Enter
(which now also drops the blanks before the cursor, as helix does) slides or
stretches by what the cursor moved, and an arrow collapses. The replay gives
every other range the same. Esc after a pulls each range's end back by one
(helix restore_cursor), which replaces Text.append_at. The wiX-edit-drops-sel
and msel-append waivers are gone.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
| |
command
A program that crashed out of a full screen left the command pane's emulator
in the alternate screen with mouse reports, bracketed paste or a hidden cursor
on, and the next command ran in that. Before the '% line' separator the pane
now leaves the alternate screen, turns those modes off and soft-resets
(DECSTR). The docs add that a command which clears the screen and its
scrollback erases the pane's history above it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Kill quit the editor, which in acme is Exit; acme's Kill stops the
commands it started. Exit now quits as acme's does (exec.c, rowclean):
it refuses once, naming each pane with unsaved text, and quits when
asked again with nothing edited since (a small scratch is not asked
about). Kill, bare or with names, stops the commands pardes typed into a
terminal (an exec, a middle click, a pty/run) while their shell's marks
say they run, by SIGTERM to the terminal's foreground job, never to the
shell (acme posts the kill note, which terminates). Both are session
builtins; the topbar's Kill becomes Exit, same width, and every golden's
topbar row changed by exactly that word (checked line by line); the
builtins script scrolls one more row for the index's new line.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
| |
The log said new N / and later del N <cwd> for a terminal, with no rename
in between, though a terminal is named by its directory. setCwd now logs
the rename once the pane has been announced. A terminal's ctl line gave
body length 0 while its body reads its history; it now counts that
history (without keeping a copy).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
A tag that is a text can hold a newline, and the tagline, the body under it
and the pointer all assumed one row. The pane's tag now takes a row per line
(up to eight, and never the body's last row); the body starts below it, the
rows a pointer counts start the body after the tag's lines, a click on any
line puts the tag's cursor there, and a pixel shell gets a tag layer per
line. A tag of one line draws exactly as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The tag was a fixed buffer with its own one-line editor, a cursor measured
across the path, and a hijack of the body's mode while it was typed into.
It is now the pane's second Text: its own characters after the computed
prefix (path, dirty marker, PDF page), which is never stored in it, so a
rename or a dirty marker never moves its cursor. Normal and insert mode are
the body's, undo included; `:` moves the keyboard between body and tag, the
tag remembers its cursor and starts on Save, and executing a word from it
hands the keyboard back. The mouse still sees the prefix: a sweep selects
across it and a click on the path drafts a new name.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
acme keeps what edits a text in its Text (dat.h:171-190) and the window
holds a body and a tag of that type. The cursor, the selections, the modal
state and the edit-buffer undo move off Pane into Text.zig, Pane holds
them as its body, and the edit and normal-mode operations take the Text
they edit. Nothing changes in behaviour; this is the step that lets the
tag become a second Text.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change (acme keeps dump and load in rows.c):
dumpState, restore, initFromDump and initDump go verbatim to the end of
dump.zig, after the dump format they read and write. Inside dump.zig the
moved code's `dump.` prefix drops, so `Pane` there is the dump record; the
one editor pane it names is spelled `pardes.panes.Pane`, and its other
`panes.X` references become `pardes.panes.X` because dump.zig's own tests
use `panes` as a local name.
The methods become free functions taking `p: *Pardes`: `p.dumpState()`
becomes `dump.dumpState(p)`, `core.restore(bytes)` becomes
`dump.restore(core, bytes)` and `Pardes.initFromDump(..)` becomes
`dump.initFromDump(..)`, in pardes.zig, the shells, layout.zig,
Terminal.zig, builtins.zig and the tests (38 receiver rewrites plus the
initFromDump calls). The tag-tail restore helpers stay with the tag code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
|
|
Pure move: the body of `pub const Terminal = struct { ... }` is now the file
Terminal.zig, dedented, with the imports it uses; panes.zig keeps
`pub const Terminal = @import("Terminal.zig");`, so `panes.Terminal.x`
callers and Pane's `Terminal.State` field are unchanged. Terminal.zig
joins the embedded source list.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
