summaryrefslogtreecommitdiff
path: root/src/config.zig
Commit message (Collapse)AuthorAge
* SPC q runs Exit, refused once over unsaved panes as the tag word is, as ↵Gabriel Schneider36 hours
| | | | | | helix's :q Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A +Pager keeps its program's colours: the session parses what /pager is ↵Gabriel Schneider37 hours
| | | | written after its directory with ghostty-vt, SGR becomes spans drawn over the plain text, every other escape is dropped, and PagerColor off pages it plain
* Shift-Esc always backs out: in every mode and pane it goes to the previous ↵Gabriel Schneider38 hours
| | | | | | | | | | | | | | | pane, as Esc does from normal, and a raw program never sees it; Ctrl-b alone toggles raw Shift-Esc switched a terminal in normal or insert mode into raw, so the one key meant to get out of anything got a script or a person into a program instead. It is now handled before any mode: an open prompt is closed, insert mode left, a pending count dropped, and Last runs, the pane keeping its mode (a raw terminal stays raw). Ctrl-b is the only switch between raw and normal. The keymap's two chords become one, back_out; the cheatsheet row, the guide's mode table and the tutor say so, and the tty and builtins goldens are re-recorded. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* DumpDir refuses a relative directory and one that may not be written, up ↵Gabriel Schneider39 hours
| | | | | | | | | | | | | front, and a Dump that could not make its directory says permission denied A relative DumpDir was resolved from wherever pardes started, and one under a directory that may not be written was taken, the Dump failing later as `no such directory`. DumpDir now takes an absolute or `~` path whose nearest directory there may be written, and refuses any other with what it takes; a Dump refused by a directory above says permission denied (fs.deniedAbove), as a Save does. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A terminal's kitty graphics draw as glyph art where pixels cannot, and by ↵Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | choice: Petscii on the pane, TermImages for new ones Under an outer terminal without kitty graphics a tty pardes cannot pass a terminal pane's images on, so it draws them itself as an image pane's Petscii does: each row of an image is matched to C64-palette glyph art over the cells it covers (GlyphArt.renderRect, the exact-grid half of GlyphArt.render), cached while it is on screen. yazi is still told the kitty protocol works, so it keeps sending its previews. The same art is a choice anywhere: the Petscii builtin now takes a terminal pane too (PaneKind.picture), flipping its images between pixels and glyphs, and a terminal holding images, or drawing them as glyphs by choice, says petscii:on|off in its tag as an image pane does. TermImages real|petscii (default real) is what a new terminal starts with; it is in DumpConfig, /ctl and the reference. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* pardes - reads stdin into a +Pager pane, and is a terminal's PAGER and ↵Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | GIT_PAGER, Pager pardes|off to opt out; command panes page through cat A paging command in a terminal, or run through its pty/run, sat in less, and a pty/run never answered. `pardes -` now reads stdin to its end, strips terminal escapes (colour, OSC, overstrike), and shows it: inside a session as a clean <cwd>/+Pager pane made through pane/new and back at once, outside one as a new editor whose first pane it is, as `vim -` does. A terminal's shell gets PAGER and GIT_PAGER set to this pardes's own path and `-` where the user's environment sets neither; `Pager off`, a setting in /ctl, init and DumpConfig, leaves terminals started after it to the environment. A command pane's one-shot shell keeps cat, its output being a pane already. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The leader key's comment says where it applies: every normal mode, a tag's ↵Gabriel Schneider47 hours
| | | | | | | | | | | and a PDF's too, never a raw terminal's config.zig said leader paths apply in body normal mode only, but normal.zig takes the leader action for every target it handles, tags and the column and workspace tags included, and a PDF pane passes it through. The behaviour is the useful one; the comment is corrected. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Shell's help says what a bare Shell is: $SHELL if it is executable, else ↵Gabriel Schneider47 hours
| | | | | | | | | | | /bin/sh, not "the login shell" The settings table and the bad-value refusal said bare Shell returns to the login shell, but defaultShell takes $SHELL when it can run it and /bin/sh otherwise; the passwd entry is never read. Both now say what the code does. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The cheatsheet draws mouse buttons as a mouse, keys as chips, and pairs as ↵Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | tables #btn and #chord draw a mouse (left button, wheel, right button) with the pressed part filled; the wheel is a narrow slot on a paper halo, hollow or filled, so it never reads as a button. A chord is the held button, then for each click the held one and that one down, with arrows between; #btn(.., shift: true) adds a ⇧. HTML gets a span with an aria-label. A key is one soft pill with no border: a combination (Ctrl-w) reads Ctrl + w and a sequence (g g, SPC f c) g › g, separators muted inside it; #keys("h", "j", ...) sets alternatives as separate pills. The drift test reads every key a #keys call names. #pairs sets key | meaning content as a two-column table on alternating tints; split: 2 sets the leader map as two such tables side by side. The mouse chords get their own table: cut, paste, copy (B1-B2 then B1-B3, one B1 hold, as mouse.zig says), 2-1 with an argument, 2-3 cancelling. The A4 page draws its own title and drops the content's level-1 heading. docs/typ/README is the function contract for content files. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The tutor follows the guide's order, points at its sections, and no longer ↵Gabriel Schneider47 hours
| | | | | | teaches $ as line end or the terminal tag's old words; a test checks the words, paths, chords and tags it names Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A one-page A4 cheatsheet, the first file of a Typst docs corpus in docs/typGabriel Schneider47 hours
| | | | | | | | | | | | docs/typ/cheatsheet.typ holds the facts as semantic calls (#key, #btn, #chord, #word, #tag, #addr, #file, #cmd, #doc); docs/typ/style.typ defines those once, drawing them for paged output and emitting HTML elements under --features html; docs/typ/cheatsheet-a4.typ is the page. `zig build cheatsheet` renders it when typst is on PATH. A config.zig test reads every .typ in docs/typ and fails when one names a builtin, key binding or default tag pardes no longer has. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* DumpConfig writes a setting this shell cannot show as a "# Word unsupported" ↵Gabriel Schneider47 hours
| | | | | | | | | | | comment, GripWidth among them on the tty, so the whole report writes back to /ctl The report said it could be written back as is, but "Lift unsupported" and the tty's "GripWidth 100" were each refused by the root ctl, and "DumpDir (none)" would have named a directory "(none)". Those lines are now comments, and a test writes every line of the report back. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Every setting's bad-value refusal names what it takes: InactiveDim 0-100, ↵Gabriel Schneider47 hours
| | | | | | | | | | | | MessageLinger 0-60000 milliseconds, a path's limit, a font's form A setting that chooses among words named them, but one that takes a number, a path or a font said only "bad value" over 9P and "does not take that value" from a tag, leaving the range to be guessed. The refusal, both ways, now says its range or what it takes, from one table beside the words. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* After a ThemeFile, the root ctl and DumpConfig say ThemeFile and its path, ↵Gabriel Schneider47 hours
| | | | | | | | | | | so what they report writes back Both said Theme and the name inside the .zon, which no Theme knows, so writing the report back to /ctl failed with "no theme". While a loaded ThemeFile is the theme in effect they now say the word that loaded it. A Dump carries the line too, so a Restore reloads the file. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* DumpConfig's lines that set nothing start with #, and a line starting with # ↵Gabriel Schneider47 hours
| | | | | | | | | | | | | | runs as nothing at an exec, a ctl or the init file DumpConfig's information lines ("Platform: tty", "Startup config: ...") began with words. Written back, as the report means to be, or clicked, each ran as a shell command or failed as an unknown control message. Each now starts with `# `. A line starting with `#` is a comment, as in a shell: it runs as nothing, silently, at an exec, at the root's, a pane's or a column's ctl, and in the init file. Documented in fs.md and config.md. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* DumpConfig prints each setting as the ctl word that sets it, reads ↵Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | unsupported for one the frontend lacks, and includes LocationsConfig The report meant to be feedable back as configuration, but several lines were not. Shell and Font each took three to six lines of "requested", "effective" and "pending". The transition read "Panel transition PanelSlide", with no Panel word. WindowOpacity and TaglineSize carried "(pending)" and "(build-time only)". A GUI-only toggle such as Ligatures was left out on the tty, and LocationsConfig was missing altogether. Now every line up to a blank one is a word and its value: - Shell <path>; - Font <name>:<size>; - one on/off line for each Panel word; - `unsupported` for a setting this frontend does not have; - LocationsConfig as it would be typed. After the blank line comes what is in effect but set by no word, phrased so that none of it starts with a ctl word. The test checks that each line before the blank one starts with a setting word. The GUI scripts that read the font lines (font_size.py, appearance_gallery.py) now read the new ones. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Release Pardes 0.6Gabriel Schneider47 hours
|\ | | | | | | | | | | Merge: audit top-five cuts + tag sweeps + Config/DumpConfig (on the audit bug fixes C9, C2). Co-Authored-By: Claude Opus 5.5 <[email protected]>
| * Config opens the startup file, DumpConfig the settings report, and the ↵Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | workspace tag reads Dump Themes Config Debug Exit Config (SPC f c) opens init, found as the settings report finds it (opts.startup_config_path: $XDG_CONFIG_HOME/pardes/init or ~/.config/pardes/init, and the macOS and Windows paths config.md gives). A pane that already holds it is gone to instead; a file on disk is looked at; with none, an empty pane is named for it, and Save makes its directory and any above it first (File.make_dirs, fs.makeDirs) before writing. Without a configuration directory it says so and opens nothing. The report Config used to open, the startup path and every live setting, is DumpConfig, in a +DumpConfig pane. No alias keeps the old meaning. The workspace tag's default words put Themes where NextColor was, NextColor staying a builtin, and Config beside it. A tag the user edited is kept as it was: a dump stores only an edited one (topbar_custom), and a restore puts back only that. theme.snap types NextColor onto the workspace tag to click it, and tagnav's walk back to Dump takes five long-word steps. The rest of the re-recorded goldens differ in the workspace words and their widths only. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | The GUI embeds its shaders' GLSL from shaders/ always: the 14 prebuilt ↵Gabriel Schneider47 hours
|/ | | | | | | | copies, identical to their sources, go, and so does the label saying which was used shaders/prebuilt/*.glsl were byte-identical to shaders/X.glsl or to prefix.glsl + post/X.glsl (checked with cmp, all 14), kept only so a -Dprebuilt-shaders build could name them; EffectCode and Config then labelled the GUI's shader source as live or prebuilt. The GUI embeds shaderSource (a concatenation, no glslc) either way now; the prebuilt SPIR-V stays, and zig build shaders refreshes only it. Config's report and EffectCode lose their GUI shader source line. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Afterglow (G14) is removedGabriel Schneider47 hours
| | | | | | | | | | | The user, looking at the lapis showcase: "one of the animations is like a flashing on the whole pane or something, that is really bad, just remove it". Every changed cell glowing meant a pane whose whole text changed (a file opened, a +Search refilled, a terminal's output) lit up at once: replacing a pane's text took its mean brightness from 38 to 70 and back over 250 ms. Gone like Ripple and Glitch: the builtin, the setting, its Chrome fx bit, the GUI's diff state and decor, the test, and the docs, which keep the user's words.
* Merge: 9P rounds 18-20 + Recent + renames + render G11-G14, tty track, ↵Gabriel Schneider47 hours
|\ | | | | | | cursor + faithful themes
| * Shader files compile again on save; an attached GUI runs the session's post ↵Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | chain shader_build.zig takes the Shadertoy compile out of the GUI's Post: the process that holds the core compiles each chain file behind the prefix on a thread, watches its directory (file_watch's new shader slots), and on a change reads and hashes each file, compiling only one whose bytes moved. A failed compile keeps the last good SPIR-V and is said once; the same bytes are never compiled or reported twice. A file is read with std, not fs.zig's readFile, whose turn hand-off a worker thread does not hold. A detached session compiles for its frontends and sends them the chain (wire post: each pass's scene and level or the file's SPIR-V, and ShaderAnimation) on attach and on every change, so an attached GUI runs the same passes, levels and animation as a local one while still reading no disk and running no program. The attached GUI describes its frames to the chain from the session's chrome and redraws an animating chain on its own.
| * T7: the scroll thumb flashes as a terminal pane scrollsGabriel Schneider47 hours
| | | | | | | | | | | | | | ThumbFlash (off by default) brightens a body's scroll thumb toward the ink when its view moves and fades it back over 250 ms, truecolor only. The tty present path now clears shell_continuous once before its effects and each effect only raises it, so the trail and the flash no longer mask each other.
| * T1: ChipShadow, a terminal's notice chips cast a cell's shadowGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | ChipShadow on|off (off; the tty shell's, §9.2 T1): each notice chip casts a shadow one cell right and one down inside its own pane's body: on a blank cell a half block (▌ right, ▀ below, ▘ at the corner) in a colour 35% darker than the ground (OKLab), so the shadow is half a cell thick; under text the ground itself darkened. Never the cursor's cell, a selection, a tag or another chip; truecolor terminals only. Tests: the shadow lies right of or below the chip, never in it; nothing with it off or without truecolor. Snapshots unchanged. Feel review: .scratch/render/tty/shadow/.
| * T2: JumpTrail, a terminal cursor's jump leaves a short fading trailGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | JumpTrail on|off (off; the tty shell's, §9.2 T2): a jump of three cells or more leaves three to five cells of trail behind the cursor along its path, their ground mixed toward the text's colour in OKLab (most beside the cursor), fading out over 120 ms. Truecolor terminals only (vaxis's answer, or COLORTERM truecolor/24bit); never the cursor's own cell, a selection or anything outside the focused pane's body; none under Motion off. It rides the continuous path (Pardes.shell_continuous) while it lasts; a few cells of output a frame. docs/effects.md opens the terminal track with the audit under decision 2 (keep and polish, remove nothing). Tests: a ten-cell jump lights 3 to 5 cells behind the cursor on its row, gone by 120 ms; a one-cell step and a terminal without truecolor light none. Feel review: .scratch/render/tty/trail/ (a real tty session replayed through pyte at 60 fps).
| * G14: Afterglow, changed text glows a moment and fadesGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Afterglow on|off (off, a pixel shell's; Chrome.fx bit 4): the GUI keeps the grid it last drew and when each cell changed; a body cell whose text changed glows in the theme's accent, at most 18% and under the text's contrast floor, fading with an ease-out over 250 ms, one flat rectangle a run of cells that changed together; never a tag or a grip, the cursor or a selection; a scrolled body (its first line moved) starts over rather than lighting up whole. On the continuous path while anything glows. Tests: three changed cells glow as a run of two (the cursor's left out), gone by 250 ms, a scroll lights nothing. Gates as before; goldens byte-identical. Feel review: .scratch/render/afterglow/.
| * G13: Parallax, lapis's dots drift with the text at a quarter of its speedGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Parallax on|off (off, a pixel shell's; Chrome.fx bit 3). A body region carries its first line (Region.line, a file's scroll or a terminal's grid offset; the wire's region record grows a u32). The GUI offsets each body's page dots by a quarter of its line in rows, and of G6's glide offset while one runs, so the pattern drifts with the text and settles with it; the cell shader reads it from the instance's serial slot, whose per-cell dissolve noise G7 left unused (the dead noise code goes). Tests: a scrolled body tells its line; the shift handed to the shader is a quarter of it within the dots' period. Measured in a capture: four lines move the dots 13 px (140 px / 4 mod 22). Gates as before, goldens byte-identical. Feel review: .scratch/render/parallax/.
| * G12: Occlusion, pane bodies darkening faintly toward their edgesGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | Occlusion on|off (off, a pixel shell's; Chrome.fx bit 2 — the glow bits field is now `fx`): four soft strips cast from just outside each pane body inward, clipped to the body and round a cursor, black pre-warped to linear light, 2% at most (§9.1) and under the lift's contrast ceiling, in the pane's own group. Tests: the shade stays inside the body, off the cursor, at most 2%. Gates as G11. Feel review: .scratch/render/occlusion/ (with an x40 diff).
| * G11: HoverGlow, a soft underline of light under a look-hover's wordGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | HoverGlow on|off (off, a pixel shell's; Chrome.glows bit 1, SelectionGlow bit 0 now that there are two): under the word a look-hover would open (its cells in the affordance's tint) a strip three logical pixels tall along its foot, blurred by one, in the theme's accent, at most 22% and under the text's contrast floor, fading in over 80 ms; kept to the bodies and split round a cursor. glowBlocks serves G9 and G11. The strip is cast from a row away so addSoft's caster cut-out misses it. Tests: the glow comes up by 90 ms and never falls on the cursor's cell. Gates as G10 (a loaded machine shifted the GUI goldens a scene once; a rerun matched 01-08). Feel review: .scratch/render/hover/.
* | A refusal over unsaved panes keeps its list in +Unsaved and shows a short noticeGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | Exit's refusal (and Restore's, Del's, Delcol's, get's) put its full text on a notice that went: a long list of names, gone before it was read. The list now goes into one +Unsaved pane, filled again by each refusal, a row a pane (`<name>: Modified`) and the `Exit again to discard` line; the notice is short, `3 unsaved panes — Exit again to discard`. The 9P `unsaved` records and the write's err are as they were. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | ThemeSel is Themes and FontSel is Fonts; the old words still work in init ↵Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | files and dumps The user asked for the plainer words. Every use is renamed: the builtins, leader paths, /commands, the docs and tutor, tests, and the themesel golden, re-recorded. An init file's ThemeSel or FontSel runs the new word and says `ThemeSel: renamed to Themes`, as ColumnTags is said; a dump naming an output pane by the old word restores it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Recent lists the files opened lately, closed ones too, and a jump back to a ↵Gabriel Schneider47 hours
|/ | | | | | | | | | | | | | | | closed file reopens it A file closed by accident, its path forgotten, could not be found again: the jumplist dropped closed panes. Every file opened (a look, a Save of a scratch, a Restore, a rename) goes first in a list of 200, kept once, its dot noted when it closes, kept across sessions in $XDG_STATE_HOME/pardes/ recent. `Recent` (SPC f r) shows it in a reused +Recent, each row `path:line:col open|closed` a look reopens; /recent reads `open|closed <path>`. The jumplist keeps a closed file's entries, +Jumps marks them `(closed)`, and Back to one opens the file at its place. acme has no such thing; its dump and Load are the nearest. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Merge: 9P rounds 9-17 + render DPI, dark tints, G4-G10Gabriel Schneider47 hours
|\
| * G9: SelectionGlow, a soft halo round the body's selectionGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SelectionGlow on|off (off; a pixel shell's, Chrome.selection_glow): each block of selected rows in a pane body casts Lift's soft kind in the selection's own colour, the block its caster (never touched) and a cursor beside it joined to the caster; clipped to the bodies (never a tag or a grip); at most 22% (§8.2), less where the text round it would drop below min(its contrast, 4.5); fading in over 100 ms with an ease-out, on the core's continuous path (shell_continuous); none while panes move. Blocks come from the cells in the theme's selection colour (documented). Tests: the halo's colour, its clip to the body, nothing at its first frame and up to its cap after 100 ms, fading done. Gates as G8. Feel review: .scratch/render/selection/.
| * G8: a notice leaves quicker than it arrivesGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | The notice chip's motion was mostly there (a drop easing out on the Motion flavour, a dissolve easing in, Lift's shadow in tier 4 at its fade). Its dissolve took 300 ms against a 180 ms fall, the wrong way round for §8.1 (leaving quicker than arriving, 100 to 160 ms): MessageDissolve now defaults to 150. The field comments had the two easings swapped; the stack test pins a longer dissolve for the case it checks. docs/config.md and docs/effects.md say so. Tests: both timings in their bands, leaving quicker. Gates as G7 (no golden moved). Feel review: .scratch/render/notices/.
| * G4: bloom, vignette and grain in the post chainGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Three bundled Shadertoy passes beside Crt, each `Bloom|Vignette|Grain 0..3` (off by default, nothing drawn while off), in shaders/post/: - Bloom: what is brighter than the page (a channel's linear peak over 0.75/0.7/0.6 and over the page's own + 0.15, so a light page does not bloom) glows, 2/3.5/5% (§8.2's budget). The glow is a dual Kawase blur in RGBA16F textures at half size and down, 3/4/5 steps by level (shaders/bloom-down, bloom-up; Post.bloomChain), composited in linear light and dithered. - Vignette: round, from halfway to a corner, 10/18/28% at the far corners, in linear light, dithered. - Grain: a still, triangular-spread grain of 1.5/3/5 of 255 on page-coloured pixels only, a logical pixel big; still, so it asks for no frames. Focus rule: the shell passes every bundled pass the rectangles of the tags with their grips, the column and workspace tags, the notices and the cursor (pardesSpare, at most 32, neighbours on one row merged), and a bundled pass leaves them as they are; and a per-theme ceiling (pardesCap, Post.capsOf) keeps the page's text and the selection's text at min(their contrast, 4.5) under each pass at its strongest. User files get no ceiling and no spared rectangles. Fix found on the way: SDL GPU binds at most 4 KiB of a uniform block, so every Shadertoy colour after iPalette (iBackgroundColor, iForegroundColor, the cursor and selection colours, iPalette[>=4]) read zero. The prefix's block is cut in three (Globals, Palette, Colors) with ghostty's names and order, each pushed as a slice of the one struct; pardes's own block moves to binding 3. Tests: the caps hold over every native theme; each uniform slice fits 4 KiB; the prefix's members in ghostty's order across its blocks. Gates: tty/gui unit-test and core-test pass; snap fails only nested-optout; GUI goldens 01-08 byte-identical (09-18 wait on wkzlsqvy, as in somtrmsz); web builds. Feel review material: .scratch/render/{bloom,vignette,grain}/ (levels on forge, dusk, acme, crops, a levels mp4).
* | Every builtin says what it does in /commands, and a test holds each to itGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | 87 of the listed words had no description: settings have no doc comment to read, so each now carries a one-sentence doc, and the builtins without one got theirs. Exit's no longer names an internal function, and Repl's first sentence is short enough to be read whole. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A looked word selects its next place in its own pane, as acme's look3Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A plain word looked at (a look write, a right click, an ML record written back) opened another identically named +Search pane each time, until the panes ran out, and never wrapped. As acme's look3 searches the text for it (look.c:210), it now selects the word's next place in that pane after the dot, wrapping at the end, and opens nothing. LookWord list, a new root setting, keeps the +Search listing (search is the default); the rsearch snapshot and an output test that walk the listing say LookWord list. (The leader-path check over every builtin gets a comptime branch quota, as one more builtin took the GUI build past the default.) Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Shell refuses a name that is no executable, and bare restores the defaultGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | Shell took any word and the host quietly ran another shell at the next spawn. It now refuses a path or name that is not executable ("Shell: x: no executable by that name", failing a ctl write, logged err), a bare Shell goes back to the default, and a default $SHELL that is not executable falls back to /bin/sh. shellset's golden takes the refusal on the message row (re-recorded by name). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | The default Shell is $SHELL, else /bin/shGabriel Schneider47 hours
|/ | | | | | | | | | With no Shell set, pardes ran fish, which a box may not have and a user may not use. The default is now the user's login shell ($SHELL), else /bin/sh; an explicit Shell still overrides it. The tests pin their own shell (snapshots bash, the python suites /bin/sh or bash) and pass with SHELL unset; the Config report and docs say where the default comes from. Co-Authored-By: Claude Opus 5.5 <[email protected]>
*-. Merge: 9P rounds 7-8 + layout files + loose ends + G3 cursorGabriel Schneider47 hours
|\ \
| | * G3: the focused cursor glides a jump on the Motion flavour's springs, and blinksGabriel Schneider47 hours
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The core owns the motion, as Lift: animation.CursorGlide keeps the focused cursor's four corners on springs (leading corners at the flavour's pace x2.4, trailing ones x follow, so a jump smears and collapses; a long jump bows by the flavour's arc), sampled at each frame's own time. A step of a cell or less, insert mode, a focus change and any scroll (a file's view, a terminal's output) land at once; a snap lands a glide under way too. The quad is clamped to the focused pane when drawn (never its springs). Chrome carries it on the wire (cursor_glide: bit 1 a cursor, bit 0 gliding; cursor_alpha; cursor_quad, grid cells; cursor_idle_ms): the GUI draws the quad as an overlay in the cursor's colour, at 85% (70% on the long flavours) rising to solid as it lands, and hides the cells' cursors while it does: one or the other every frame. Only the focused cursor glides. Blink (CursorBlink, on by default in pixel shells) is the shell's: from cursor_idle_ms and when the frame arrived, solid while typing and 500 ms after, 530 ms halves with 80 ms eased edges, solid after 10 s idle, and never while the window is unfocused or minimized or on a virtual clock. An edge redraws the last frame with no core render (level B, blink_redraws); an attached GUI blinks from the same field without a frame per edge. Tests: snaps a cell, glides a jump with smear and bow, arrives under a pixel by 150 ms on smooth and lands exactly, shifts with a scroll; blink holds, eases, stops; the core glides a jump (ge) frame by frame (gliding exactly while it moves, alpha rising, exact at rest), snaps a step (j) and a switch to insert mid-glide; a terminal's scrolling output lands its cursor; wire round-trip of the cursor record. Shared files: src/animation.zig, src/pardes.zig, src/config.zig (toggle CursorBlink), src/surface.zig, src/detached/wire.zig.
* / A choice setting's refusal names what it takes, and /commands lists themGabriel Schneider47 hours
|/ | | | | | | | | | | | Bare Placement and BootShell flip, which is pardes's convention for a word that chooses (Crt does too), but nothing said so, and "bad value in control message" never said what would do. A refused value now says `takes acme, pardes` (every switch and choice setting), /commands lists each such setting's values in a fourth field, and config.md and fs.md say that bare steps to the next. Motion and ShaderAnimation stepped nowhere bare and now step like the rest. Co-Authored-By: Claude Opus 5.5 <[email protected]>
*-. Merge: 9P round 6 + empty columns + render (acme theme, grips, Lift, Motion)Gabriel Schneider47 hours
|\ \
| | * Motion flavours differ by design, and drive notice drops and pane movesGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The flavours looked alike because Lift, the only motion that read them, moves a shadow a few pixels: overshoot and wind-up were sub-pixel. By design now: crisp leaves at full speed and never passes its mark; smooth (the default) eases in and out in twice crisp's time, a slide arriving in 208 ms (inside §8.1's 220); bouncy passes its mark by ~30% and settles twice; playful winds up, passes by ~40%, and stretches and squashes, text included (the user's choice). Small motions are exaggerated by the flavour's gain. Motion gains launch, gain, span and norm, and ease(u)/speed(u) for moves of fixed length. The notice drop follows ease() over its fall (alpha never behind its position) and stays inside its pane's body past its row. Panel tracks carry the flavour in Track.motion (the old padding byte; macOS header name follows); opening and moving slides, zooms and rises follow it over span x their frames; landed, a pane is exactly its target; closing keeps its own exit. A pane past its mark never takes a neighbour's click; a rising one stays in its box. Tests: each flavour's lift trajectory distinct; flavour character; exact landing bit for bit; a stretched pane's drawn cells map back; the overshoot hit rule; the vertical clip at peak; legacy tests pinned to crisp. GUI golden 18-mid-transition changes (the retuned smooth slide at frame 6). Shared files: src/animation.zig, src/Presentation.zig, src/Messages.zig, src/macos.zig, src/config.zig, src/pardes.zig tests, src/ninep/screen.zig test, docs/effects.md, docs/config.md.
| | * acme looks like acme; every theme gets acme's button, scroll column and 2px ↵Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rules acme takes plan9port's own colours (acme.c iconinit, draw.h): selections #eeee9e in the body and #9eeeee in the tag, black ink; exec and look sweeps #aa0000 and #006600, white ink; a #99994c scrollbar under a #ffffea thumb; black rules; a #8888cc tag/body rule and column button. Every theme: the grip is acme's button, its tag row's full height, in one scroll column with the scrollbar (rail_px, 12 at a 17px tagline, scaled, times GripWidth, a percent, default 150; same x0/x1 to the pixel): focused clean = solid box; focused dirty = box_dirty filled to a box ring (acme's modbutton); unfocused clean = a box_border ring round the tag's ground; unfocused dirty = box_dirty a pixel inside that ring. The grid, which has no ring, marks dirty with a bold * on box_dirty in the grip's second cell and fills an unfocused grip halfway to its ring. Regions carry a dirty flag. Column buttons are the same shape, solid. 2px rules between columns and stacked panes (inside the tag band's slack), none at the window edge; a 1px tag/body rule halfway between tag and page. Theme data: tag_sel_bg, sweep_bg/fg, tag_rule, rule_px, rail_px, box_border, box_dirty. Chrome: rule_px, tag_rule, rail_px, grip_border, grip_focus_ring; a comptime guard on Chrome's layout forces a wire bump once v8 ships. Structural rules are exempt from the focus-indicator rule (docs/effects.md). Tests: acme widths; stacked rule in the slack at two tagline sizes; every grip-column pixel is band, button, ring or rule, and the button shares the scrollbar's x0/x1 (4 metrics x top/bottom x focus x dirty); the four grip states distinct in every native theme with a non-colour dirty cue in the grid; wire round-trip of the new fields. Shared files: src/colors.zig, src/surface.zig, src/body_layer.zig, src/tagline.zig, src/detached/wire.zig, docs/themes.md, docs/config.md, docs/effects.md, 21 snapshot goldens (the grip cells only), test/gui-goldens.txt. Motion flavours differ by design, and drive notice drops and pane moves
| | * Motion flavours, and Lift is shadow, rim or auto: auto on a dark page ↵Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | recedes the other panes (InactiveDim) Motion off|crisp|smooth|bouncy|playful is one parameter set (animation.Motion) every fx animation reads. One focus spring per pane drives both the lift and the dim, at the flavour's pace; a grid snaps. Lift drops glow and surface. A shadow falls on pane bodies and rails only, capped so text and the selection keep min(contrast, 4.5); rim is a hairline along the focused tag's top. auto is a shadow on a light page; on a dark page the core recedes the unfocused panes' text (InactiveDim, ported from 2e4d97f, default 30 under auto) with the same floor. Tests: focused text contrast is never below unfocused in any style, dim or theme; the focused pane's cells and tag are untouched by a dim. Shared files: src/config.zig, src/builtins.zig, src/ninep/ctl.zig, src/surface.zig, src/detached/wire.zig, docs/config.md, test/snapshots/builtins.snap (one more wheel for the longer help).
| | * Lift takes a style: shadow, surface, rim, glow or autoGabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The user wants Lift to read on dark themes, where a shadow has nothing to darken. `Lift shadow|surface|rim|glow|auto` (`on` is auto, bare flips auto and off): surface lightens the lifted part's ground about 5.5% (Material-dark), rim is a thin soft light off its top and left edges, glow a faint halo in the theme's accent (Chrome.accent, the focused box colour), auto a shadow on a light page and surface with half a rim on a dark one (by the page's luminance). Rim and glow are the soft kernel in a light colour (no pre-warp: coloured light is laid on as is, within §8.2's budget); each style is capped per theme so text keeps min(its contrast, 4.5) (tests: darkening and lightening over the native themes). The style travels in the palette (Chrome.lift_style, one byte on the wire). Config reports and ctl reads `Lift <style>`. Shared files touched: config.zig, builtins.zig, ninep/ctl.zig, detached/wire.zig (palette byte), gui.zig. Not touched: pardes.zig, Messages.zig, mouse.zig.
| | * G1: Lift, soft elevation shadows (off by default)Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | `Lift` (a GUI toggle, capability lift) lifts the focused pane on a critically damped spring (animation.Spring: closed form, about 240 ms to settle, velocity kept across retargets, settled = no frames) and floats notices. The core puts the lift on the regions (Region.lift, on the wire); the GUI casts from it: a soft shadow is decor, an erf rectangle on one quad grown by 3 sigma (decor.frag, flag 0x10000000), in the quad's own space so a track's transform carries it; darken-only, the caster's rect left alone, alpha pre-warped for linear light and IGN-dithered. Cast last in its group, so a neighbour's rails and rules darken with its text; a notice's before its rule. Strength is capped per theme so text over the darkest shadow keeps min(its contrast, 4.5) (test over the native themes). Opt-in until the focus lift/dim default is decided. Feel review material: docs/effects.md. Test-mode PARDES_TEST_SERIES keeps every captured frame. Shared files touched: pardes.zig (two fields, one nextWake line), detached/wire.zig (lift on the region), config.zig, builtins.zig (capability), gui.zig. Not touched: Messages.zig, mouse.zig, tty, host_io.
| * | A document dragged beside the boot shell leaves it; BootShell replace closes ↵Gabriel Schneider47 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | it as before Placement and BootShell are one kind of setting now, a word from an enum, set, flipped bare, and reported by one arm. Co-Authored-By: Claude Opus 5.5 <[email protected]>