| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
| |
A dump is named by the second it was written in, so a second Dump within it overwrote the first. A clash now takes -2, -3 and on.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
| |
A relative DumpDir read back as written, relative, and a trailing / stayed. It now resolves against the directory pardes started in, as a Dump already did, and is shown cleaned.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
| |
came from
Once the workspace tag was edited, its own text kept the Restore <path> of the dump at that time, stale after the next Dump; and a Restore dropped the path altogether (the new session had no last dump). A new dump now swaps the old path in the tag's own text, and a Restore points the word at the dump it read.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
| |
A Restore makes a new session, which never loaded the kept list, and saveRecent gives up until it has: Recent was empty after a Restore and nothing opened afterwards was kept. The new session now takes the old one's list (a boot from a dump reads the kept file).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
A terminal's directory rode inline in the spawn effect, capped at 256
bytes, so Tty in a directory of about 377 bytes said path too long. A
directory past the inline buffer now goes out of line (Pardes.spawn_dirs,
given to the host when the spawn is performed), up to the host's path
limit (4095); past that, Tty says its directory is longer than a path
may be. The effect queue stays its size.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
| |
Exit, Restore, Del and get warn only about a pane edited since it was
opened, which its saved hash says (set at its first edit). A pane a Dump
kept dirty came back with no hash, so a restored session quit at once
over it. Restoring one dirty now gives it a hash its text does not match.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |\ |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
A restored text pane came back with its caret at its view's top, whatever
had been selected. The dump now keeps each text pane's dot, q0 and q1 as
acme's keeps a window's, and Restore puts it back without moving the view
it kept. Two look-walk tests that restored and walked on now start from the
match they were on.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
A script could read and write a column's tag but not act on the column.
col/<serial>/ctl takes Delcol, Joincol, New and Tty, each acting on that
column as from its tag; col/<serial>/exec runs a word as a middle click in
the tag; rmdir col/<serial> closes an empty column and refuses one with
panes (ENOTEMPTY, an err record saying why). The root ctl's refusal of
Delcol and Joincol points at col/<serial>/ctl. A dump keeps each column's
serial and Restore logs restoredcol <old> <new>; the dump golden gains
them. Documented: Joincol's survivor, the column on the right, keeps its
serial and tag.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Sixteen panes was far too few for a real session. MAX_PANES is now 64 on a
desktop and stays 16 on the board; the 48 more slots cost about 3.7 KB each
in fixed tables (the core 1.33 to 1.45 MB, its surface 19 to 72 KB), and a
pane itself (84 KB and its terminal) is allocated only when it opens. At the
cap, pane/new fails with `pane/new: no pane slots: 64 max` and an err
record rather than a bare ENFILE, a 9P look or exec that would open a pane
fails its write with the same words and reads back empty, and New, Tty,
Tutor and Alt-n say it on the message row (their ctl writes fail with it).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
A session running with Placement pardes came back from Restore as acme: a
dump kept the layout and the theme but no setting. It now keeps every
setting line that differs from a fresh session's, as the root ctl reads it,
and a Restore applies them; the theme stays where it was kept, the font the frontend's,
and REPL bindings are still dropped. The dump golden gains the three the
snapshot harness sets.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |/
|
|
|
|
|
|
|
|
|
|
| |
A Dump into a DumpDir it could not write, or a Restore of a file that is
not a dump, answered a ctl write with rc 0 and only a message, and the
Restore warned about unsaved panes before it ever looked at the file. The
hosts' dump write now fails the waiting 9P write with EIO (the late failure
a Save uses), naming the path and the reason in the log, and Restore parses
the file before its unsaved-panes refusal, failing with `not a pardes
dump`.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |\ \ |
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
makenewwindow puts them
Newcol makes an empty column; closing a column's last pane leaves it empty with
the keyboard on its tag; Delcol and Joincol alone take a column away; the
session's last pane closing quits. The +New stand-in and replaceStillborn /
stillborn_joiner are gone. Every new pane goes through exec.placeNew, which
follows acme's makenewwindow (active column, empty column whole, blank space,
halving the biggest) or, with Placement pardes, the old rules. ColumnTags is
gone: column tags are always shown. A grip drag shows acme's box cursor.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
A script holding serials from before a Restore could not find its panes: the
replacement numbers them afresh. The dump now keeps each pane's serial (0 in
older dumps), and the replacement's log says `restored <old> <new>` for each
after its `restore <path>`.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
After Restore a dogfood agent's command panes were fish shells under a stale
`(make) exit 0` tag. The dump's terminal record now keeps a command pane's
line and status, and Restore brings it back done: what it printed, its exit,
no shell and no rerun.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |/
|
|
|
|
|
|
|
| |
A dogfood agent's `Tty bash` pane came back from Restore running fish: the
dump kept its directory but not the shell it was opened on. The dump's
terminal record now carries that shell (empty for the configured one, as
older dumps read), and Restore starts it again.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
retaken spawns nothing
The spawn effect carried only a slot, and the host read the command and shell
off whatever pane held the slot as it forked: a command pane closed and its
slot taken by the next one before the effects ran forked the new pane's
command twice. The effect now carries the pane's serial and is dropped when
the slot holds another; forkShell checks it again after giving up the turn
for its directory's stat, the one moment a 9P client can change the panes
under it. Every front end performs spawns with the turn, from its step.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
and restores
A client that wrote Restore saw its connection cut with no answer, and could
not tell a Restore from a crash. The listener now lets the writer's answer out
before the cut, and cuts only the old editor's connections, refusing their
requests meanwhile; a client that dials during it is the new editor's and
stays. Dump logs 'dump <path>' and the restored editor's log 'restore <path>'.
Keeping connections across a Restore was weighed and left: the fids name the
old editor's panes and opens, so it would mean carrying serials and open
records into the new one, where acme's Load only adds windows. tty's Restore
also closed its shells' ptys without reaping them; it retires them now.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
With tags reduced to Texts, what is left of them is the computed prefix, the
default and saved tails, entering and leaving a tag and the headers: that goes
to tagline.zig, as acme keeps the tag half of a window in wind.c. Tag and
header drawing moves next to body drawing in body_layer.zig, and the tag hit
helpers go to tag_layer.zig with the Hit they read, where sameCell now also
tells the lines of a taller tag apart. The docs describe the tag as a Text.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The headers had their own one-line editor with its own keys: Enter always
executed, h/l and J/K moved between headers and panes, Ctrl-c/x/v cut and
pasted, and TagLine refused a newline that 9P accepted. They are now Texts
like a pane's tag, with no prefix and a default until edited, so normal and
insert mode, undo and the look and execute keys are the body's. Moving
between them is the window keys' job: Up from a pane with nothing above it
reaches its column's tag and then the workspace's, Down comes back, and
Left and Right walk the column tags.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The tag was a fixed buffer with its own one-line editor, a cursor measured
across the path, and a hijack of the body's mode while it was typed into.
It is now the pane's second Text: its own characters after the computed
prefix (path, dirty marker, PDF page), which is never stored in it, so a
rename or a dirty marker never moves its cursor. Normal and insert mode are
the body's, undo included; `:` moves the keyboard between body and tag, the
tag remembers its cursor and starts on Save, and executing a word from it
hands the keyboard back. The mouse still sees the prefix: a sweep selects
across it and a click on the path drafts a new name.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
acme keeps what edits a text in its Text (dat.h:171-190) and the window
holds a body and a tag of that type. The cursor, the selections, the modal
state and the edit-buffer undo move off Pane into Text.zig, Pane holds
them as its body, and the edit and normal-mode operations take the Text
they edit. Nothing changes in behaviour; this is the step that lets the
tag become a second Text.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Not a pure move: state moves. Pardes's `pipe_seq` and `pipe_wait` become
Pipe.zig's own fields `seq` and `wait`, and Pardes embeds one as
`pipe: Pipe = .{}`. pipeRequest reads only the request in flight, so it now
takes `pipe: *const Pipe` and the four shells call
`core.pipe.pipeRequest(id)` (their Pipe imports go away again); the other
pipe functions still need the panes and keep `p: *Pardes`, writing
`p.pipe.seq/wait`. Field reads in dump.zig, the shells' tests and two test
files follow (`core.pipe_wait` becomes `core.pipe.wait`). No behaviour
change.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change (acme keeps dump and load in rows.c):
dumpState, restore, initFromDump and initDump go verbatim to the end of
dump.zig, after the dump format they read and write. Inside dump.zig the
moved code's `dump.` prefix drops, so `Pane` there is the dump record; the
one editor pane it names is spelled `pardes.panes.Pane`, and its other
`panes.X` references become `pardes.panes.X` because dump.zig's own tests
use `panes` as a local name.
The methods become free functions taking `p: *Pardes`: `p.dumpState()`
becomes `dump.dumpState(p)`, `core.restore(bytes)` becomes
`dump.restore(core, bytes)` and `Pardes.initFromDump(..)` becomes
`dump.initFromDump(..)`, in pardes.zig, the shells, layout.zig,
Terminal.zig, builtins.zig and the tests (38 receiver rewrites plus the
initFromDump calls). The tag-tail restore helpers stay with the tag code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
messages
PDF highlights (hover preview, search, selection) are baked into page rasters,
and any change re-rendered the whole page with MuPDF; the TTY then re-sent it
as base64 (4.7 MB a page), the GUI as a new texture. Worse, a pointer motion
over a PDF invalidated the page even when no preview was shown, so every
motion paid that. Now:
- A raster whose baked highlight set equals the wanted one is left alone.
- A highlighted page keeps its clean rows (before highlights and tint); a
change repaints only the rows of quads that differ, running MuPDF's
highlight pass (pardes_pdf_paint_highlights) over those clean rows and
tinting them: the operations a full render performs, so the pixels are
identical. MuPDF band renders are NOT bit-identical to a whole page (edge
rows, resampled images), so they are never used to patch; the comment
claiming otherwise is corrected.
- ImagePlace.patch hands shells the changed rows; the GUI uploads just those
rows into the texture it holds.
- The TTY probes kitty shared memory (t=s) with an id vaxis never reaches and
sends rasters as a /dev/shm name when the terminal reads it; direct base64
otherwise (ssh).
- Shells that take row patches (GUI, TTY with shm) repaint a selection while
it is dragged instead of only on release.
Latency elsewhere:
- TTY: an animating frame no longer sleeps 16 ms blind; a tick thread posts
into the input queue, so input inside the frame is handled at once.
- TTY and GUI: queued pointer motions coalesce to the last.
- GUI: a skipped swapchain image re-arms the frame (3 retries); animations
still tick while nothing presents.
- Editing: the line index is carried across an edit instead of rebuilt from
a scan of the whole file per keystroke.
Messages fall into their row (ease-in; the GUI slides the band out from under
the tagline, a terminal fades it), stay until the next input as before, linger
MessageLinger ms (default 800), and dissolve (ease-out). MessageAnimation
toggles it; both are settings, in Config and startup files. The snapshot
harness pins the old behaviour. The detached server now ticks animations.
A restored terminal comes back live: the old screen and scrollback (dumped
as clean VT by ghostty's formatter, replayed at the new size; older dumps
fall back to their rendered text), a dim
"restored history" marker, then a new shell in the directory it was in.
Right-click on a line number in a file pane looks at that line (a sticky
context header's number included).
Measured with an external pty driver (TTY), an in-process fence trace
(GUI, PARDES_TEST_LATENCY), and test/pdf_pointer_bench.zig (pixel identity
against the baseline and a whole-page oracle); balanced A/A/B rounds, paired
per-round statistics.
Messages stack: each event gets its own row and its own fall, linger and
dissolve; a line keeps its row until it leaves and a new one fills the first
free row. Announcements and statuses are replaced in place, not stacked.
MessageFall, MessageDissolve and DumpDir are settings Config reports.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
Empty marker on the last pre-Reload change. Keep the Reload experiment on reload (3801914), its first change on reload-start (200a1fc), and the unfinished performance investigation on reload-perf-wip.
|
| | |
|
| |
|
|
|
|
| |
Consolidate pane, layout, memory and host code. Serve 9P by default over Unix sockets, with runtime mounts and optional TCP/QUIC transports. Remove FUSE and obsolete proof-of-concept examples.
Fix highlighting and terminal-history performance, expand differential and stress-test infrastructure, sort navigation results while preserving the next occurrence, add syntax-colored Braille minimaps, remove SPC-k, and document 9P interaction as a repository skill.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
board cap on one screen
## The wire is the effect stream, not a new protocol
`pardes --detach` leaves a core running with no terminal; `pardes --attach` is a frontend that owns
a terminal and a socket and nothing else. N frontends on one core all look at the same screen —
`screen -x`, not N sessions.
The codec (`src/detached/wire.zig`) carries exactly one `Event` or one `Host.VTable` call per
message. That is not a coincidence and it is why there is no third vocabulary to keep in step: the
core's IO seam was already a struct of function pointers with plain-data arguments, so a socket is
a legal implementation of it. `nested.zig`'s socket could not be reused — it carries a builtin
command line, and a command line cannot carry a frame.
ARCHITECTURE-NEUTRAL on purpose, not as decoration. The frontend on the far end may be
riscv32-freestanding on the ESP32-P4 while the core is x86_64 Linux, so every field is an explicit
little-endian fixed width and no message is a blit of a native struct. A protocol that only works
between two builds of the same compiler would have thrown away the one frontend that motivated it.
## The board comes in; its toolchain stays out
`src/p4.zig` becomes `src/esp32p4.zig`, and the pardes half of `../05-zig-p4` — the vaxis-over-
serial runner, the UART editor terminal, the keystroke rescue ring, the on-die test suite — moves
into `src/esp32p4/`. `build.zig.zon` gains `.zig_p4 = .{ .path = "../05-zig-p4" }`, so
`zig build -Dplatform=esp32p4 -Desp32p4-firmware` builds, flashes, monitors and self-tests the
board from this repo's `build.zig`.
The DIVISION is the point. What moved is what only pardes wants: the runner that drives a pardes
core over a serial line. What stayed is everything a second project would also want — the HAL, the
register/radio/oracle layers, the linker script, `_start`. `zig_p4` declares no dependencies of its
own and its `build()` early-returns when it is not the root package, so this costs the package
graph exactly zero packages and the editor's own builds nothing at all.
## limits.zig: nine forgettable places become one budget
Nine `platform == .esp32p4` capacity tests lived in nine files. They were never nine decisions —
they are ONE decision, how much memory this build may spend, taken nine times where no reader could
see the total. `src/limits.zig` puts the whole budget on one screen with every cap named against
what it is measured against, derived from two booleans.
The payoff is testability on a machine that is not the board: the caps are ordinary comptime values,
so a host build can be compiled against the board's numbers and the parking, eviction and clamping
paths a 240 KiB core takes get exercised by the normal test suite instead of only over a UART.
## A bare `zig build`
`zig build` with no arguments now builds the tty and GUI binaries and installs them into
`~/.local/bin`, and says so once on stdout with the flag that overrides it. The old default built
one binary into `zig-out` — a path nothing on a `PATH` ever looks at, which made "build it" and
"use it" two different commands for no reason.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`-Dplatform=p4 -Dtarget=riscv32-freestanding` emits a single freestanding OBJECT
exporting a seven-function C ABI, not an executable. The board's toolchain
(../05-zig-p4) owns `_start`, the linker script and the UART driver and links this
in. The seam is bytes rather than types, so neither side can accidentally depend
on the other's internals, and a signature that drifts fails at link time.
The serial line is the whole of the I/O. `src/p4.zig` drives vaxis unchanged over
it: the renderer is a byte writer and `queryTerminalSend` is a byte writer, so the
terminal emulator on the host answers the capability handshake and the firmware
sees a real terminal. Measured going out over the wire on attach: alt screen,
in-band resize, cursor report, kitty keyboard, kitty graphics, DA1.
THREE WORDS EXIST ONLY HERE. `src/board_memory.zig` implements `Peek`, `Poke` and
`Hexdump`, gated on `builtin.os.tag == .freestanding and !isWasm()` - derived from
the TARGET, because they are a property of running with no OS under you rather
than a product option, and because wasm is freestanding too and is exactly what
must be excluded: in a browser an address is an offset into the linear memory this
editor's own heap lives in. Every access goes through `*allowzero volatile`: a
peripheral register is not memory, and address 0 is an ordinary unmapped address
on this bus. One 4 KiB cap per command, set by the console rather than the memory -
an unbounded dump would wedge the only console the board has for eleven hours.
Measured on ESP32-P4 rev v1.3 silicon, driven from a host terminal:
Peek 0x501101a4 0x0e63ce71, then 0xaeaa6919 on a second read - the
RNG register, so the volatile loads are not folded
Poke 0x5011002c 0xdeadbeef LP_STORE0; a later Peek returned 0xdeadbeef
Hexdump 0x5011002c 32 16 bytes a row, hex columns and an ASCII gutter
Peek 0x50110001 `peek: MisalignedAddress` on the message row
That last line is the one that matters. A misaligned 32-bit access traps, and a
trap in firmware is a watchdog reset that takes the session with it, so the check
that turns it into a message is the reason the file is hand-written rather than a
generic reader.
BARE METAL BOOTS AN EMPTY OUTPUT BUFFER. Every other boot layout in `init` makes a
shell, and on this platform that is not a preference but an impossibility: nothing
to fork, no pty to give a terminal pane. Booting one anyway produced precisely what
that describes - a pane whose tag ends in `Filter`, no gutter, no buffer, and every
keystroke vanishing into the Fallback's silent pty. An output buffer is also what
the platform's own words want, since Peek, Poke and Hexdump each fill one.
Sized for the board rather than for a desktop:
* `allocators.zig` gains a p4 tier that is ALL fallback - every capacity is zero,
so each arena spills immediately to the 384 KiB heap the firmware hands over,
and no megabyte-shaped static reservation lands in `.bss`.
* `source_manifest.zig`'s allowlist is EMPTY on p4. The table is ~0.95 MiB of
rodata against a 1.5 MiB flash partition; the firmware's filesystem is the
serial host's, through the Host vtable.
* The grid is clamped and the clamp is measured, not guessed: every cell is paid
for four times (vaxis Screen + InternalScreen, pardes Surface + previous_cells),
so 40x12 fits and 80x24 exhausts the heap during `Pardes.init`.
* `Vaxis.resize` deinits both screens before allocating replacements, so a failed
resize leaves vaxis rendering nothing. The p4 shell keeps the previous geometry
on failure instead of leaving a half-applied one.
Also here: `output_pane_integration_test.zig` had an exhaustive switch over
`Platform` that adding `.p4` left unhandled, which broke `zig build unit-test`
outright - the native test binary is the one consumer no platform build compiles.
346 tests pass again.
|
| |
|
|
| |
+ snapshot refresh
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
An output buffer was a file pane with a flag, and everything special about it
was re-derived from outside by asking the wrong question: the buffer NAME
("+Search", "+Help"), a parallel search_kind field, and f.output predicates
sprinkled through kind-agnostic code.
Now it carries its Origin — the Builtin, or the lsp.Kind for the five gotos
helix binds as motions rather than words — plus that command's argument, and
one Traits table answers every question the scattered code used to ask: what
it is called, whether n/N steps it, whether it is a doc for layout, whether
Esc dismisses it, whether it saves. The name is derived FROM the command
instead of being the thing that identifies it.
Adding a kind of output pane is adding a row. No golden moved.
|
| |
|
|
| |
painting over the UI
|
| | |
|
| |
|
|
| |
into the live session. dump.outPath resolves $PARDES_DUMP verbatim (the snapshot harness pins /tmp/pardes-dump.zon so dump/load/restore goldens stay deterministic), else $XDG_DATA_HOME|~/.local/share /pardes/pardes-YYYYMMDD-HHMMSS.zon (dir mkdir-ed; wall clock via libc clock_gettime — std.time.timestamp is gone in 0.16). After write_dump the shell reports the written path back (core.setLastDump) and the topbar grows "Restore <path>": middle-clicking Restore reloads the last dump, and "Restore <path>" executed anywhere takes the path as its first argument (onSelect prefix match). Core stays sans-IO: the builtin stashes restore_req; each shell consumes takeRestore() after drainEffects and swaps in initFromDump at the current screen size (pre-sized: dump panes never greet), tearing down the live ptys (tty: cancel reader + close + gen bump; gui: SIGKILL, the gen-guarded eof closes the old fds). Web ignores it. New restore.snap golden: KEEPME survives the restore, GONESOON echoed after Dump does not, the topbar word appears then resets. 29/29.
|
|
|
test/ (snapshot parity harness + 18 frozen goldens). One sans-IO core, vaxis tty + SDL3 GPU native + wasm web shells, 18/18 parity with the purged prototype, 7.6k lines vs 12.1k. Fix: gui shell pre-sized the core at init so the greet-releasing resize never fired (blank panes until first interaction); live sessions now init at defaults and get the real grid as a resize event (the shell contract, documented on Options).
|
