| Commit message (Collapse) | Author | Age |
|---|
| |\ \ |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Pure moves, no behaviour change. draw.zig holds the whole core frame in
order: render, the pane, tag, header and notice painters it calls, and the
character-effect composition (Pardes.render stays a declaration alias).
Presentation.zig is the panel presentation state as a file struct, and
animation.zig the easing curves, transition kinds, tracks and boxes, the
character effects' sources and the generic displayed-value transition, all
of which lived in layout.zig. layout.zig keeps only layout.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Insert mode dropped the selection on the first key and restored only the
primary's appended-over span on Esc. Now each insert-mode edit is made at the
bare cursor as before, and the range is then carried through it with helix's
Range::map rules: typing slides an i range and stretches an a range, Enter
(which now also drops the blanks before the cursor, as helix does) slides or
stretches by what the cursor moved, and an arrow collapses. The replay gives
every other range the same. Esc after a pulls each range's end back by one
(helix restore_cursor), which replaces Text.append_at. The wiX-edit-drops-sel
and msel-append waivers are gone.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Registers.zig replaces the one yank buffer: every register keeps a value per
range, y fills them in document order, and p, P, R and insert Ctrl-r put
value i at range i, repeating the last (helix paste_impl). "<reg> names the
register for the next command; _ swallows, # numbers the ranges, . is each
range's text, % the file's name, / the last s/S pattern, and + and * are the
system clipboard through the ClipYank and ClipPaste paths. SPC y now writes
+ alone, as helix's does. The acme chords and a paste into a terminal take
the default register joined by newlines. The msel-yank-paste waiver is gone.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |/ /
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
the REPL
The execute key and the middle click marked a global flag that the first
execute cleared, so of several selections executed at once only the first
reached a bound REPL and the rest ran as commands. Where an exec came from
now goes with it, as acme's execute() asks of its Text (exec.c:122,169):
builtins.Ctx carries from_body, runBuiltinFrom and executeFrom take it, the
gestures set it, and chordEachSel sets it for each selection.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
language's files
Repl python in a terminal's tag or on its ctl binds it (Repl - unbinds, Repl
bare says the binding, the same word again changes nothing), with an id,
python-a, python-b, in its tag. An exec made by a gesture on the body of a
file in that language -- a middle click or the execute key, on any text, a
single word too -- or on the REPL's own body is typed into it, bracketed if
its program asked for that, else line by line with a once-said warning for
Python's blank lines, then Enter; the message row says -> python-a in the
tag's name tint, the log send <from> <to> <id>. Several bound for the
language: the pane asks which on its notice band, as Del asks, one key
answering, Esc none, nothing remembered. The gesture is known where it is
dispatched (mouse.zig, the execute key), so the tag's words, Exec <text> run
by name and a command word @`cmd` stay commands, and a 9P exec is never
sent. A finished command pane is no REPL; bindings are not dumped. The docs
spell out the escapes, the pdb and input() caveat and the no-bracketed-paste
papercut.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
are tested for their offsets
Dogfooding saw a body right-click reported as ML0 0 2 3 qty. On file panes
the offsets were right in every case tried here (a scratch made over 9P and
clicked while another pane is active, after a hover, scrolled, soft-wrapped,
tab-indented, inside parentheses); the test now holds them. The 0 0 form
is a terminal's body, which has no offsets to give (its body is a history
snapshot); since the event file now takes a record back whole, such a record
can still be written back and done, and the docs say so. What the test did
find: a click on whitespace sent an empty record, where acme's look3 and
execute return without a word on an empty expansion (look.c:37, exec.c:141).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The tag's computed path, dirty marker and page were out of the keyboard's
reach: its cursor lived in the text after them. It now lives in the tag as
shown, as in acme where the name is ordinary text at the start of the tag, so
`0` goes to the line's start and motions select and yank the path. The path
stays read-only: an edit that would change it is refused and leaves the
cursor where it was, and typing into a file's path drafts a new name as a
click on it does. Sync moves the tag's positions when the prefix changes
length, so a rename or the dirty marker still never moves the cursor off the
text after it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
| |
A tag shows at most eight rows, so a longer one (a 9P write of many lines, or
`o` in the tag) put its caret on a line that was never drawn. Pane, column and
workspace tags now keep a first line on screen that follows the caret while
they have the keyboard, and the pointer and the pane text count their rows
from it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
With tags reduced to Texts, what is left of them is the computed prefix, the
default and saved tails, entering and leaving a tag and the headers: that goes
to tagline.zig, as acme keeps the tag half of a window in wind.c. Tag and
header drawing moves next to body drawing in body_layer.zig, and the tag hit
helpers go to tag_layer.zig with the Hit they read, where sameCell now also
tells the lines of a taller tag apart. The docs describe the tag as a Text.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
| |
A header is a Text like a pane's tag, so a newline typed or pasted into it
should show rather than hide the lines after the first; the panes below move
down to make room, as they do for a taller pane tag.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
A tag that is a text can hold a newline, and the tagline, the body under it
and the pointer all assumed one row. The pane's tag now takes a row per line
(up to eight, and never the body's last row); the body starts below it, the
rows a pointer counts start the body after the tag's lines, a click on any
line puts the tag's cursor there, and a pixel shell gets a tag layer per
line. A tag of one line draws exactly as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The headers had their own one-line editor with its own keys: Enter always
executed, h/l and J/K moved between headers and panes, Ctrl-c/x/v cut and
pasted, and TagLine refused a newline that 9P accepted. They are now Texts
like a pane's tag, with no prefix and a default until edited, so normal and
insert mode, undo and the look and execute keys are the body's. Moving
between them is the window keys' job: Up from a pane with nothing above it
reaches its column's tag and then the workspace's, Down comes back, and
Left and Right walk the column tags.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The tag was a fixed buffer with its own one-line editor, a cursor measured
across the path, and a hijack of the body's mode while it was typed into.
It is now the pane's second Text: its own characters after the computed
prefix (path, dirty marker, PDF page), which is never stored in it, so a
rename or a dirty marker never moves its cursor. Normal and insert mode are
the body's, undo included; `:` moves the keyboard between body and tag, the
tag remembers its cursor and starts on Save, and executing a word from it
hands the keyboard back. The mouse still sees the prefix: a sweep selects
across it and a click on the path drafts a new name.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
A search, pipe or Save prompt wrote its marker and answer onto the end of
the tag, so the tag's cursor, its selection, its 9P writes and a prompt
abandoned by a click all shared one buffer: the abandoned text stayed in
the tag and a 9P write landed inside the prompt. The answer is now its own
Text on the pane, typed in insert mode and shown on the notice band where
it was already drawn, and the tag never holds any of it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
acme keeps what edits a text in its Text (dat.h:171-190) and the window
holds a body and a tag of that type. The cursor, the selections, the modal
state and the edit-buffer undo move off Pane into Text.zig, Pane holds
them as its body, and the edit and normal-mode operations take the Text
they edit. Nothing changes in behaviour; this is the step that lets the
tag become a second Text.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change (acme keeps this in exec.c): execute,
commandText, max_exec_depth, executeBuiltinLine, applyStartupConfig,
runBuiltin and applySettingBuiltin; the getarg-style operand code
(withArg, PointerOperand, pointerOperand, heldSelection, chordEachSel);
takesCommandLine and the terminals commands run in (spawnTty, spawnV9fsTty,
spawnTtyWithMount, evictLonePristineTty, replaceStillborn, ttyForDir);
placeDoc; and the save path (submitSave, saveFile, saveTo, askWrite), with
the acme-chords test, go verbatim to exec.zig.
The methods become free functions taking `p: *Pardes`. executeBuiltinLine
is called from ~170 places as `p.executeBuiltinLine(..)`, so Pardes keeps
one declaration alias for it and those call sites stay; the other 104 calls
change from `p.execute(..)` to `exec.execute(p, ..)`. ninep/ctl.zig has a
local named exec, so it writes `pardes.exec.execute` instead of importing
the file.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pure move, no behaviour change (acme keeps this in look.c): expanding the
word under a click (ExpandedWord, expandedWord, expandedSel, cursorWordSel),
the n/N walk (LookFrom, lookEdge, lookStand, lookWalkPanes, lookPast,
wholeRowSpan, lookSpanIn, lookWalk, landLookSpot, noteLookSource,
armLookWalk), search results (Search, SearchStart, submitSearch,
lookFirstHit, runSearch, searchStep, jumpResult), the look-hover preview
(LookHoverWait, LookHoverPreview, FileWordSpan, PdfWordPreview,
invalidateLookHover, cancelLookHover, lookHoverPane, noteLookHover,
refreshLookHoverFromRaw, advanceLookHover) and lookAt with its targets
(focusPaneLine, selectSpan, openPaneTarget, focusPaneByPath,
clearNavigationSelection, resolveLookTarget, locationText,
canonicalLookLocation, pdfLinkLocation, followPdfLink), with five tests, go
verbatim to the end of look.zig after its word and target resolution.
The methods become free functions taking `p: *Pardes`; their 143 call sites
change from `p.lookAt(..)` to `look.lookAt(p, ..)` (tests reach them as
`pardes.look.x`). Inside look.zig the moved code's `look.` prefix drops.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
|
|
Pure move, no behaviour change: handleMouse with dragUpdate, dragRelease,
seamIdxAt, reportGesture, gestureRange, dispatchPointerBuiltin,
mirrorTtySelection and chordCutPaste, the pointer hit helpers
(bodyHitForPane, sameTagCell, tagColumn, sameBodyCell), chromeTarget with
ChromeTarget, paneAt, the Drag state type with clampBorderCol/Row, the seam
test fixtures and thirteen pointer and drag tests go verbatim to mouse.zig.
The methods become free functions taking `p: *Pardes`; their 36 call sites
change from `p.handleMouse(..)` to `mouse.handleMouse(p, ..)`, including
web.zig's chromeTarget and macos.zig's paneAt. The Mouse event type stays
in pardes.zig with the rest of the event vocabulary.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
