summaryrefslogtreecommitdiff
path: root/src/ninep/ctl.zig
Commit message (Collapse)AuthorAge
* Jumplist fills its one +Jumps again, as Recent does, never opening a secondGabriel Schneider4 days
| | | | | | | | Each Jumplist opened another +Jumps below the asking pane, so a few clicks stacked stale copies of the list. Recent's refill of its own pane is now shared, and Jumplist uses it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* After a ThemeFile, the root ctl and DumpConfig say ThemeFile and its path, ↵Gabriel Schneider4 days
| | | | | | | | | | | so what they report writes back Both said Theme and the name inside the .zon, which no Theme knows, so writing the report back to /ctl failed with "no theme". While a loaded ThemeFile is the theme in effect they now say the word that loaded it. A Dump carries the line too, so a Restore reloads the file. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A builtin for one kind of pane is refused on another with why: Petscii, ↵Gabriel Schneider4 days
| | | | | | | | | | | | | Palette, Ascii, Filter, Togglettymode, the Pdf words, Mode and TreeContext Each of these did nothing, silently, on the wrong kind of pane, so a ctl or exec write of Palette to a text file answered ok as if it had acted. A builtin now declares the one kind it is for (needs), the registry reads it, and runBuiltinFrom refuses the rest before dispatch, as Repl and Edit already refused theirs. Mode and TreeContext, which take more than one kind, say their own refusal. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Save and Save path on a PDF or image pane are refused, "a PDF pane has no ↵Gabriel Schneider4 days
| | | | | | | | | | | | text to save", never a silent success A bare Save on a PDF or an image did nothing, and `Save path` returned without writing, both answered as done. Such a pane shows a file it does not hold as text, so there is nothing of its own to write. Save now refuses it with why ("Save: a PDF pane has no text to save", or an image pane's), and so fails the write that asked. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fs.md says a body write to a terminal is typed input, never a bracketed pasteGabriel Schneider4 days
| | | | | | | | | | | A write to a terminal's body goes to its child as typed keys: no bracketed-paste marks around it, even when the program set 2004, so a newline in it is Enter and a shell runs each line. fs.md did not say which, and a script cannot guess. It does now, and a test writes to a terminal whose program asked for bracketed paste and checks the bytes sent are only the ones written. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Save path logs a save record naming the path it wroteGabriel Schneider4 days
| | | | | | | | | | | Save of a pane's own file logged `save <serial> <name>`, and so did a scratch's `Save path` (the pane takes that name). A `Save path` that writes a copy of a file pane, or a terminal's scrollback, elsewhere logged nothing, so a follower could not tell the file was written. It now logs `save <serial> <path>` with the path written, once the host has written it (events.noteLogAs). fs.md's log table says so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Restore logs and names the whole path of the dump it reads, not the name ↵Gabriel Schneider4 days
| | | | | | | | | | | | | as typed `Restore x.dump.zon` read the DumpDir's x.dump.zon but logged `restore x.dump.zon`, and `~/d.zon` logged the tilde. A follower could not tell which file was restored. The builtin now resolves the name once (fs.restorePath: `~` expanded, a relative name the DumpDir's when one is there, else the current directory's) and hands that path to the host, which reads it and logs `restore <path>`. Its messages name it too. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A focus moved over 9P tells the programs that asked for focus reports, as a ↵Gabriel Schneider4 days
| | | | | | | | | | | | click does A program that set DECSET 1004 heard `CSI O` and `CSI I` when the keyboard moved by a click, a key or the window's focus, because update() checks after each event. A /focus write went through serveFs, which never did, so the program kept believing it had focus until the next input event. serveFs now runs the same check once a request has settled. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A 9P look keeps its leading blanks: an indented line, or blanks alone, is ↵Gabriel Schneider4 days
| | | | | | | | | | | | | | | | looked for as written Every line written to look or exec went through Messages.next, which trimmed blanks from both ends. A look of ` indented` then found the first bare `indented`, and a diff's blank context line ` ` looked at nothing. A look's line is now its text: only its `\r` and newline go. lookAt keeps the blanks for the word search too; it expands `~` only for a look that starts with one, and the path, address and command readings trim for themselves as before. runSearch keeps a pattern's blanks, since a builtin's argument comes trimmed already. An exec line is trimmed as before. fs.md says so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A restored pane whose file is gone from disk comes back dirty, and Del asks ↵Gabriel Schneider4 days
| | | | | | | | | | | | | | before throwing its text away A dump keeps a pane's text. Restored after its file was deleted, the pane came back clean: the watch's baseline read of the missing file failed quietly, and Del closed it without a word. Its text was then nowhere at all. Restore now checks the file: a local path with nothing on disk comes back as one deleted on disk, as the watch would have said. It says so once, logs `changed N deleted`, and is dirty, so Del, Exit and Restore ask first. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Kill with a name and nothing running says "Kill: nothing running" and ↵Gabriel Schneider4 days
| | | | | | | | | | | | | | succeeds, as bare Kill does Bare `Kill` with nothing running is a message, not a failure: a script's Kill has nothing left to do. `Kill make` in the same state failed the write with "no running command has that first word", as though make were the mistake. With nothing running at all, named or not, Kill is now the message. It still fails when commands run but none has the word. The two tests that used `Kill zzz` as a builtin that always fails now use `Unmount zzz`. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look at file:3:0 is refused as addr 3:0 is: a column counts from 1Gabriel Schneider4 days
| | | | | | | | | addr refuses a column 0 with EINVAL, "address out of range: a column counts from 1". A look took `file:3:0` as line 3 with no column, since the parser holds no column as 0, and succeeded. Now a look whose column, or end column, is written as 0 is refused with addr's words and errno. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* DumpConfig's lines that set nothing start with #, and a line starting with # ↵Gabriel Schneider4 days
| | | | | | | | | | | | | | runs as nothing at an exec, a ctl or the init file DumpConfig's information lines ("Platform: tty", "Startup config: ...") began with words. Written back, as the report means to be, or clicked, each ran as a shell command or failed as an unknown control message. Each now starts with `# `. A line starting with `#` is a comment, as in a shell: it runs as nothing, silently, at an exec, at the root's, a pane's or a column's ctl, and in the init file. Documented in fs.md and config.md. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* With no pane at all, the root look opens its file and the root exec runs its ↵Gabriel Schneider4 days
| | | | | | | | | | | | | | | command in the session's directory /look and /exec run at the active pane, and with every pane closed they failed ENOENT, "file does not exist", about a file the writer never named. Now an exec runs as the workspace tag's would, in the session's directory: a builtin at the stand-in, a command in a command pane. An empty window's click now runs a command line too, not only session words. A look runs from a scratch made as New makes one, which also makes the column. That scratch is dropped, unannounced, when the look went to another pane, so opening a file leaves only the file. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The ctl word name refuses a leading blank, as the name file doesGabriel Schneider4 days
| | | | | | | | | | `name /tmp/x` written to a pane's ctl trimmed the extra blank and named the pane /tmp/x. The same name written to the name file was refused with "a blank at its start", which fs.md gives as the rule, so the name a script wrote is the name it gets. The ctl word now hands the name file everything after its one separating blank. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A builtin that takes no argument, written with one to an exec, is refused ↵Gabriel Schneider4 days
| | | | | | | | | | | | wrong #args as at a ctl At a ctl, `Config extra` and `DumpConfig extra` were refused with `wrong #args`. Written to an exec, the builtin match missed, since the word takes no argument, and the line ran as a shell command named Config, which did nothing and said nothing. An exec now refuses it with the ctl's words. A setting word keeps its value (`Verbose off`). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* acme's Tab, Indent, Local, Incl and Abort are refused as acme words pardes ↵Gabriel Schneider4 days
| | | | | | | | | | | | | has not, never run as shell commands The five were missing from the refused list, so at an exec or a ctl a typed `Indent on` fell through to the shell as a command named Indent. pardes has no equivalent for any of them: its tabs and indentation follow the file, commands always run in the pane's directory, and there is no include path or abort. They now get the same "invalid: acme's X is not a pardes builtin" as Zerox or Send. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A word at /tagexec or a column's exec that makes, acts on and focuses no ↵Gabriel Schneider4 days
| | | | | | | | | | | | pane reads back nothing Newcol written to /tagexec read back `1`, the pane with the keyboard, which the word never touched. That was a pane word's fallback (a pane's exec answers the pane it ran at) applied to a tag no pane owns. A word in a column's or the workspace's tag now answers the pane it made, refilled, went to or focused, and otherwise nothing. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A control character in a write to any ctl file refuses the whole write, and ↵Gabriel Schneider4 days
| | | | | | | | | | | | | | | a refused line is quoted with its control bytes shown as blanks fs.md already promised that the whole of a write to /ctl, a pane's ctl and a column's ctl is checked first, as it is for exec and look. But a ctl write ran its lines one by one, so a line holding a control byte gave that line's own, misleading reason ("unknown command"). Worse, the reason quoted the raw byte back into the err record. The check now happens in tree.write before anything runs, with the same EINVAL and reason exec gives. A refusal's quoted line shows control bytes as blanks, so an err record never carries a raw escape. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An append to a body through 9P costs its own bytes, not five passes over the ↵Gabriel Schneider4 days
| | | | | | | | whole body: 60 KB appends go from 35.7 to 2.1 ms each Round 25 measured bulk body writes at about 8 ms a write. There is no frame wait in it: a profile of open, write, clunk in a loop found the flush of each close walking the whole body five times. dotOf, setDot and showOffset turned the cursor between offsets and rows by counting every newline from the top; setContent found the line index's changed span by comparing old and new byte for byte, and hashed the new text to see whether it was back to the saved one. The rows now come from the file's line index by binary search (checked against the counting at every offset), a splice tells setContent the span it changed, and the text is hashed only when its length is the saved text's. Measured over 9P on a Debug build: 60 KB appends 35.7 to 2.1 ms, 8 KB 5.3 to 0.8 ms, 1 KB 1.3 to 0.9 ms. What is left is two copies of the text an edit (the splice's and the undo snapshot's). The perf gate gains body-appends, 64 appends of 8 KB on the 50k-line file, and its three baselines are recorded again. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Config opens the startup file, DumpConfig the settings report, and the ↵Gabriel Schneider4 days
| | | | | | | | | | | | | | | | | | | | | | | | | | workspace tag reads Dump Themes Config Debug Exit Config (SPC f c) opens init, found as the settings report finds it (opts.startup_config_path: $XDG_CONFIG_HOME/pardes/init or ~/.config/pardes/init, and the macOS and Windows paths config.md gives). A pane that already holds it is gone to instead; a file on disk is looked at; with none, an empty pane is named for it, and Save makes its directory and any above it first (File.make_dirs, fs.makeDirs) before writing. Without a configuration directory it says so and opens nothing. The report Config used to open, the startup path and every live setting, is DumpConfig, in a +DumpConfig pane. No alias keeps the old meaning. The workspace tag's default words put Themes where NextColor was, NextColor staying a builtin, and Config beside it. A tag the user edited is kept as it was: a dump stores only an edited one (topbar_custom), and a restore puts back only that. theme.snap types NextColor onto the workspace tag to click it, and tagnav's walk back to Dump takes five long-word steps. The rest of the re-recorded goldens differ in the workspace words and their widths only. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Terminal.zig is terminal.zig: a file of functions and no fields takes a ↵Gabriel Schneider4 days
| | | | | | | | namespace's lowercase name The last of the deferred renames, now that the tty and theme agents have landed: panes.terminal at its importers, the alias lines in Text.zig and File.zig and panes.zig's own uses following. dump.zig's Terminal struct, a dump record, is not this. The served sources list and docs/design.typ name the new file. test/perf.zig's references change, so the three perf baselines take its new harness id with their numbers as recorded. No behaviour changes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* One look logs one err: a file:addr whose file is not there is one miss ↵Gabriel Schneider4 days
| | | | | | | | quoting what was written, and a refused placement is the look's only failure A look at utf8txt:#3 from a terminal searched for utf8txt, missed, then found the terminal no text to address: two errs for one write. It is now looked for whole, as zzq:2 already was, so every form's miss reads no match for "<as written>". A look whose new pane was refused a place went on to settle its line in the pane it stayed on and logged has no line N after the placement failure; it now stops there. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Under pardes's placement a pane whose neighbour is in no column goes at a ↵Gabriel Schneider4 days
| | | | | | | | column's foot, not nowhere After Delcol took the last column's panes, pane/new under Placement made a scratch that no column held, since a scratch was placed only under the asking pane, which was gone; a look from it then unwrapped the missing parent in belowParent and panicked (the 9P monkey's crash-e1873f34). Both now fall back to the foot of the active column, else the last. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A write to addr, limit or mark asks for no frame, so its close is not held ↵Gabriel Schneider4 days
| | | | | | | | behind one Every write that changes a pane set needs_frame, an addr write too, so the editor drew a whole frame after each and the clunk that followed waited for the turn while it did: 0.5 ms (Debug) to 1.2 ms a clunk, what made addr and event write-back 4-10x acme's. An address, a limit and the mark flag are nothing drawn; their writes no longer ask for a frame. Clunk after an addr write: 0.518 -> 0.015 ms (Debug tty, fs.py client). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A pane's ctl reads acme's fields in acme's order, the undo and redo flags ↵Gabriel Schneider4 days
| | | | | | | | included, then pardes's own Where plan9port's line has whether Undo and Redo have a step, pardes's had current, so a client reading acme's fields by position read a word for a flag. The two flags now follow the tab width, as in plan9port's winctlprint, and current|notcurrent and a REPL's id come after them. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A pane's ctl takes acme's ctl words, done by the files that replace themGabriel Schneider4 days
| | | | | | name, put, clean, dirty, del, delete, dot=addr, addr=dot, limit=addr, mark, nomark, show and cleartag were unknown control messages. Each is now done by the file or builtin that replaces it (name, Save, dirty, Del, a Del that does not ask, dot and addr and limit, mark, the tag), checked with the rest of the write before any runs; dump, dumpdir, font, menu and nomenu are refused, EINVAL, saying where pardes does it or that it has no such thing. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* acme's words run as pardes's or are refused, never as shell commands: Put savesGabriel Schneider4 days
| | | | | | Put, Get, Delete, Snarf, Cut, Paste, Zerox, Sort, Putall, Load, ID and Send written to exec or tagexec each ran as a shell command that exited 127, the write answering 0 -- a Put that looked like a save. Put now runs Save and Delete a Del that does not ask; the rest are refused, EINVAL, invalid: acme's X is not a pardes builtin (with where pardes does it, where it does), in exec and ctl alike. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look that misses file:/re/ names the file and is logged as that file's pane'sGabriel Schneider4 days
| | | | | | A miss said only look: no match for regexp, against the pane the look came from. It now says look: <file>: no match for regexp, on the pane of the file it searched. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A refused Delcol changes nothing: no +Unsaved opens, no focus movesGabriel Schneider4 days
| | | | | | Delcol's refusal opened +Unsaved, placing a pane in the layout it was refusing to change. Its unsaved records and notice say which panes; the list pane is left to the refusals of the other words. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Mini with no argument is wrong #args, EINVAL; Find, Grep and Mini say their ↵Gabriel Schneider4 days
| | | | | | | | names capitalised Mini needs a file but did not say so, so a bare Mini ran and failed EIO. It now requires its argument, refused wrong #args (EINVAL) as every such word is. Its failures, Find's and Grep's start with the builtin's own name (Mini:, Find:, Grep:), as the others' do. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A bad command inside an Edit block written whole is named, not the } after itGabriel Schneider4 days
| | | | | | A command in a { block that failed to parse ended the block there, so its } was taken as a control message of its own and the write failed unknown control message "}". A { block not yet closed now runs to its } whatever fails to parse in it, and the error names the command (Edit: unknown command z), as the line-by-line path does. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A failure said while a 9P write waits on it posts no msg, only the write's errGabriel Schneider4 days
| | | | | | A failure the editor said as it performed a write's work (a Save's disk write, a shell, a language server) was posted as a msg and taken back out when the write's err was logged, which it cannot be once a log follower has read it: a follower saw both. Such a failure is now posted without a msg in the first place (fs.write_waits), and nothing is taken back. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Every catch unreachable, orelse unreachable and syscall assert outside tests ↵Gabriel Schneider4 days
| | | | | | | | is a real refusal or says why it cannot fire A sweep for round 23's crash: a run's answer (pty/run) was bufPrint'd into 48 bytes with catch unreachable, so a foreground program's long name (macOS gives up to 32 bytes) panicked; it now cuts at the room, keeping its newline, in 96 bytes. The rest were numbers into buffers sized for them, a braille codepoint, pthread calls on the queue's own mutex, and pdf_view's resolved outline entries: each now carries a one-line comment saying why it cannot fire. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Delcol on the last column leaves the window, empty but for its workspace ↵Gabriel Schneider4 days
| | | | | | | | tag, as acme's does The last column's Delcol ended the session. The window now stays, with only the workspace tag; Newcol, and New (which makes the column it goes in), start it again. A word run with no pane at all runs with a stand-in that is no pane, the root ctl takes session words, and pane/new makes its scratch in the session's directory. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Not-found failures say it once, in plain words: grep: pattern not found, ↵Gabriel Schneider4 days
| | | | | | | | callers not found The ENOENT that 9ns reads from a failure's words came from a tacked-on suffix, grep: no match, not found, definition: nothing found, not found, no shell "x", not found. They now say it once: grep: pattern not found, find: name not found, Callers: callers not found, definition: not found, shell "x" not found (...). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Recent or Jumplist row for a file that shrank lands on its last line, the ↵Gabriel Schneider4 days
| | | | | | | | same by either route, and says so A +Recent row clamped silently and a Jumplist row missed (has no line N). Both are remembered places now: the look clamps to the file as it is, closed or open, and the message row says <file> has N lines now: at its last. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A new file, once saved, shows in /recent, openGabriel Schneider4 days
| | | | | | A pane named for a file not yet on disk is not kept in Recent (round 22), and its Save did not add it, so the file stayed out of /recent while open. A Save that puts a file on disk now records it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A PDF that cannot be read fails its look with its path and whyGabriel Schneider4 days
| | | | | | A truncated PDF said only look: <error>, with no path, where an image that cannot be read names both. It now says look: <path>: not a PDF pardes can read: <why>. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A buffer whose file was deleted on disk is dirty, and Del asks firstGabriel Schneider4 days
| | | | | | A file deleted under an open buffer left dirty 0 and let Del, Exit and the rest throw the only copy of its text away unasked. It now counts as dirty, as acme's does, and the refusals ask about it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Jumplist entry is (closed) only while no pane has its file openGabriel Schneider4 days
| | | | | | A closed file's entries stayed closed after the file was opened again another way (a look, Recent), so Jumplist said (closed) of an open file and a step onto it reopened it. They are now that pane's as soon as a pane shows the file. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* +Unsaved drops a pane once it has closedGabriel Schneider4 days
| | | | | | The list kept a pane's Modified row after the pane was closed (discarded), so it named text there was no longer anything to lose of. A pane's closing now takes its row out. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Symbols, Diagnostics and every language server list share their directory's ↵Gabriel Schneider4 days
| | | | | | | | one +Search Only Find and Grep reused the directory's +Search; a language server's list made another pane of the same name each time. Every origin named +Search now shares it, but a plain word's search, which keeps a list a pattern for n/N to walk between. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A pattern with a newline and an anchor mvzr would misread is refused EINVAL, ↵Gabriel Schneider4 days
| | | | | | | | as the doc says Its words named no malformed input, so 9ns read the refusal as EIO, and Edit's failed EIO directly. It now says bad regular expression: ..., and Edit's failure with those words is EINVAL too. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look at a corrupt image fails with an err rather than open a blank paneGabriel Schneider4 days
| | | | | | An image stb_image could not read opened as an empty image pane, the look succeeding. The bytes' header is now checked at the look (stbi_info_from_memory), and one that is no image it reads fails the look, look: <path>: not an image pardes can read, making no pane. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A PDF's body reads the text layer of the page it showsGabriel Schneider4 days
| | | | | | The body of a PDF pane read as empty. It now reads MuPDF's text extraction of the page shown, the text search and n/N already use, read-only (a write is refused, as round 22's body refusal made it). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Back or Forward over a closed file deleted since skips it and goes on, saying soGabriel Schneider4 days
| | | | | | A jumplist entry for a closed file no longer on disk tried to reopen it, failed as a look, and left the step stuck there. Its entries now go, the message row says <path>: deleted, skipped, and the same step is taken over what is left. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A clamped Recent range ends at a line's last character, never swallowing its ↵Gabriel Schneider4 days
| | | | | | | | newline A range past the end of a file that had shrunk was clamped to the empty line after its final newline and to one past a line's last character, so the selection took the newline in. Its ends now clamp to the last line and to its last character, as addr's L:C does. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look miss said again is its err record counted, as any repeated err isGabriel Schneider4 days
| | | | | | Look's miss pushed its err record plain, so a script retrying one look filled the log with the same line, where other errs are counted (x2). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A language server question that finds nothing, cannot be answered or has no ↵Gabriel Schneider4 days
| | | | | | | | room fails, and so does a write to an image's or PDF's body Callers or Callees with nothing found, Hover or Lspwhy with no room for its pane, and a question asked of no file's pane said nothing, the 9P write succeeding; a body write to an image or PDF pane went nowhere. A write that asks a language server now waits for its answer (turn.lsp_answers), and what fails there -- nothing found, no answer, a backend's @none why, a placement with no room (ENOSPC) -- fails the write and logs its err. No diagnostics is said, not failed. Co-Authored-By: Claude Opus 5.5 <[email protected]>
generated by cgit v1.3 (git 2.53.0) at 2026-10-04 23:02:09 +0000