summaryrefslogtreecommitdiff
path: root/src/ninep/ctl.zig
Commit message (Collapse)AuthorAge
* pardes - asks /pager for its +Pager and reads the serial on the same open: ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | another client's exec meanwhile can never take the text into its pane pardes - wrote `pager <dir>` to /ctl, then read /exec on a fresh open, which answers the session's last answer: a client that exec'd in between had its pane overwritten by the paged text. /pager takes the directory and answers the +Pager's serial on the open that wrote it, as /pane/new answers its own open; the ctl verb is gone. Client.ask writes and reads on one open. The README's look recipe reads its answer on its own open too. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* addr, dot and limit on a pane with no text, a terminal, an image or a PDF, ↵Gabriel Schneider5 days
| | | | | | | | | | | are refused alike: "this pane has no text to address" A terminal took an addr write and evaluated it over nothing, saying "bad address syntax" or "address out of range" by the expression, while dot refused it as no text at all. A range file of a pane with no text now refuses every write the same way, before the expression is read. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A size refusal quotes the bad value, "5 2", not the word sizeGabriel Schneider5 days
| | | | | | | | size quoted its own word in every refusal, as bad values were quoted before round 31's change for the settings. The value is the offending word here too, and is now what each size refusal quotes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look line's trailing colon is dropped, as a click leaves it off, and a ↵Gabriel Schneider5 days
| | | | | | | | | | | | look whose address fails never leaves the file it opened `a.txt:2:3:`, as a compiler prints a place, failed as bad address syntax, and still opened a.txt: the file was opened to read the address in, and stayed when the address failed. The trailing colon is now no part of the place, and a pane opened only to evaluate an address that fails goes again, the miss said from the pane looked from. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Restore, or -l, of a dump naming a ThemeFile asks the host to load it ↵Gabriel Schneider5 days
| | | | | | | | | | | again, as a /ctl write of it does The dump's ThemeFile line went to the settings table, which has no such setting and never asks the host to read a file, so a restored session came back in the default theme. The restore now makes the request a /ctl ThemeFile makes, and the host loads the file. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A ThemeFile that fails to load changes nothing: /ctl and DumpConfig keep ↵Gabriel Schneider5 days
| | | | | | | | | | | | naming the file last loaded, or none, so they always replay The request's path was taken as the theme file before the host had read it, so a file not found or not ZON left /ctl saying ThemeFile <that path>, and writing the report back failed again. The path a load succeeds with is now kept apart; a failure puts the request back to it (and watches it again), or to none. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A bad setting value is what the refusal quotes, so different bad values read ↵Gabriel Schneider5 days
| | | | | | | | | | | | and log as different records, never merged as one (x2) A setting's bad value quoted the setting's word, so "Verbose maybe" and "Verbose nope" made the same err text and the log's repeat count merged them. The value is the offending word, and is now the one quoted, blanks and all; the log's dedupe, comparing whole texts, then keeps them apart. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* pardes - keeps one +Pager per directory, refilled, named so from its first ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | | | | | | log record; streams the text in bounded writes; never loses it; handles \r, NUL and BEL as a terminal does Each paged command made another +Pager until placement failed, and then git's text was lost with exit 0; a 130 MB page timed out half written and dirty; a directory whose name held a newline left a stray +New; and the log said new +New then rename. The root ctl's `pager <dir>` now makes the directory's +Pager (named before it is announced, placed without the keyboard) or empties the one there; the text goes into it a line-ended 8 MiB chunk a write, one undo step, up to the file limit and its note, and is left clean. A directory a ctl line cannot name pages into the session's. Any failure prints the text to stderr with why and exits 1. A carriage return keeps a progress line's last state and CRLF is a newline; NUL, BEL, SO and SI go; empty stdin makes no pane. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A bare :N or :N:M look addresses the pane itself, its line N (column M), ↵Gabriel Schneider5 days
| | | | | | | | | | | | | from every way a look comes; a PDF's :0 has no page 0 A look of `:12` had no path to resolve, so it fell through to a word search for the text ":12" and found nothing. A digit-led address with no path now names the looking pane, as `:/re/` already did: its look, the root's (the keyboard's pane), Look, B3 and an event write-back all reach it, a terminal's logical lines included. On a PDF, :0 is the has-no-page miss rather than a refusal. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A terminal's kitty graphics draw as glyph art where pixels cannot, and by ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | | | | | | | choice: Petscii on the pane, TermImages for new ones Under an outer terminal without kitty graphics a tty pardes cannot pass a terminal pane's images on, so it draws them itself as an image pane's Petscii does: each row of an image is matched to C64-palette glyph art over the cells it covers (GlyphArt.renderRect, the exact-grid half of GlyphArt.render), cached while it is on screen. yazi is still told the kitty protocol works, so it keeps sending its previews. The same art is a choice anywhere: the Petscii builtin now takes a terminal pane too (PaneKind.picture), flipping its images between pixels and glyphs, and a terminal holding images, or drawing them as glyphs by choice, says petscii:on|off in its tag as an image pane does. TermImages real|petscii (default real) is what a new terminal starts with; it is in DumpConfig, /ctl and the reference. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* pardes - reads stdin into a +Pager pane, and is a terminal's PAGER and ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | | | | GIT_PAGER, Pager pardes|off to opt out; command panes page through cat A paging command in a terminal, or run through its pty/run, sat in less, and a pty/run never answered. `pardes -` now reads stdin to its end, strips terminal escapes (colour, OSC, overstrike), and shows it: inside a session as a clean <cwd>/+Pager pane made through pane/new and back at once, outside one as a new editor whose first pane it is, as `vim -` does. A terminal's shell gets PAGER and GIT_PAGER set to this pardes's own path and `-` where the user's environment sets neither; `Pager off`, a setting in /ctl, init and DumpConfig, leaves terminals started after it to the environment. A command pane's one-shot shell keeps cat, its output being a pane already. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A refusal's +Unsaved goes in the session's directory when the active pane's ↵Gabriel Schneider5 days
| | | | | | | | | | | directory is not there Exit or Restore refused over a pane named into a directory that does not exist made +Unsaved in that missing directory, where its rows could not be looked at and a Save of it could only fail. The list now goes in the session's directory when the asking pane's is not on disk. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A ctl refusal quotes the offending word alone, everywhere: wrong #args in ↵Gabriel Schneider5 days
| | | | | | | | | | | | control message "Newcol", not "Newcol 2" Some refusals quoted the whole line, arguments and all ("Newcol 2", "Verbose maybe", "lock x"), others the word alone ("Theme", "Mount"), so a script matching one could not match the other. Every ctl refusal, the root's, a pane's and a column's, now quotes the message's word alone, and one too long to quote whole gives up its middle. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look at a file it may not read says which: "look: <path>: permission denied"Gabriel Schneider5 days
| | | | | | | | | The refusal said "look: permission denied", leaving the script to guess which of the paths it looked at was locked. A file or image that will not open is now named in the failure, its path cut in the middle when long. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* /index and the log escape a control byte, DEL or C1 in a name as \xNN, as ↵Gabriel Schneider5 days
| | | | | | | | | | | they do a byte not UTF-8, so the name decodes to what it is A control byte in a name read as a space, so /index could not be decoded back to the name the name file now accepts (\x07 and a space read the same). Every byte a name holds that is not printable UTF-8 is now \xNN there; a message's text keeps spaces. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A builtin refused when its record is written back through event fails that ↵Gabriel Schneider5 days
| | | | | | | | | | | | write, EIO and its err, as fs.md says A Del refused over unsaved text, written back by an event reader, said so on the message row and answered the write ok, so the script that wrote it could not tell. The write-back now captures failures as an exec write does: the first one fails the write with its words and the errno they read as. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The reference is fs.md's per-file semantics, errors and limits in Typst, ↵Gabriel Schneider5 days
| | | | | | with the settings table, and says what the pane ctl's Left, Right, Up and Down do Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Mount with no dial is wrong #args, and a dial that is no address says bad ↵Gabriel Schneider5 days
| | | | | | | | | | | | dial address, both EINVAL Mount name alone failed "Mount name dial: missing argument" and a malformed dial "Mount: bad dial", both EIO, though each is a malformed request. They now say wrong #args and bad dial address (with the forms a dial takes), and a builtin failure in those words answers EINVAL, as 9ns reads them. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Edit's w and the other left-out sam commands fail EIO in words, never ↵Gabriel Schneider5 days
| | | | | | | | | | | | | EOPNOTSUPP, and /os refuses a rename or a chmod as not permitted, EACCES "w is not supported in pardes" read through a mount as EOPNOTSUPP, as if the file system lacked an operation, and a chmod under /os was answered "invalid truncate", EINVAL. An Edit command pardes leaves out now says so in words 9ns reads as EIO, and a rename or mode change of an /os file is "permission denied", EACCES. fs.md's Failure section and /os entry say both. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* name takes any byte a file name can hold, controls, edge blanks and bytes ↵Gabriel Schneider5 days
| | | | | | | | | | | | not UTF-8 included, so what name reads writes back as it was A pane opened on a file whose name held a tab, a control byte or bytes not UTF-8 read that name from its name file, and the same bytes written back were refused. Only what no file name holds is refused now: a second line and a NUL. The ctl word name still refuses a second blank after the word, as a line's words are split at blanks. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Views generated by each read stat 0, as acme's do: data, xdata, index, ↵Gabriel Schneider5 days
| | | | | | | | | | | | layout, recent and listeners; fs.md says which files have real lengths A stat of index, layout, recent or listeners built the whole view to count it, and data and xdata reported the body's length though a read answers what addr selects. Those now stat 0, as screen and pane/new already did, and fs.md lists the files whose length is real and says to read the rest to the end. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Restore brings back clean a pane whose file was never on disk, such as ↵Gabriel Schneider5 days
| | | | | | | | | | | | Config's new init; only a file that existed when dumped is said deleted A restored pane whose path was not on disk was marked deleted on disk, so Config's not-yet-written init came back dirty and asked before Del, Exit or Restore. The dump now records whether the file was on disk (older dumps read as yes), and only one that was and is gone is said deleted. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* :N on a PDF turns to page N, from the pane and from the root's look; @pN:N ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | answers ok with no err; an address in a pane with no text names the pane A PDF pane took :N as a word to search for, and @p<pdf>:N failed as "is no text to address" after the page had nothing to do with it, an err in the log for a look that meant something. A PDF's address is now its page: :N turns to it, one past the last is the has-no-page miss, and a byte offset or a pattern is refused saying a PDF's address is a page. The refusal for any other textless pane named an empty path when the look was a bare :addr; it names the image or @p<serial> now. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A pane's tagexec goes to the event reader holding the pane as an x record, ↵Gabriel Schneider5 days
| | | | | | | | | | | | as acme's tag clicks do, not run past it A real click in a held pane's tag was already told to the reader, but the same click written to the pane's tagexec ran at once, so a script holding the pane could not intercept it. The line is now an x record (l for a look), done when the reader writes it back. A column's or the workspace's tag is still no pane's and runs as before. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Recent and /recent keep PDFs and images as they keep files, and an open ↵Gabriel Schneider5 days
| | | | | | | | | | | | file's row is where its dot is now Only text files were recorded, so a PDF read yesterday was not there to find again, and an open file's row showed the place it last closed at, stale by however far it had moved since. A PDF is kept at its page and reopened there from its row; an image by its path; an open one's row reads its pane's place at the time of the listing. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* DumpConfig writes a setting this shell cannot show as a "# Word unsupported" ↵Gabriel Schneider5 days
| | | | | | | | | | | comment, GripWidth among them on the tty, so the whole report writes back to /ctl The report said it could be written back as is, but "Lift unsupported" and the tty's "GripWidth 100" were each refused by the root ctl, and "DumpDir (none)" would have named a directory "(none)". Those lines are now comments, and a test writes every line of the report back. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Every setting's bad-value refusal names what it takes: InactiveDim 0-100, ↵Gabriel Schneider5 days
| | | | | | | | | | | | MessageLinger 0-60000 milliseconds, a path's limit, a font's form A setting that chooses among words named them, but one that takes a number, a path or a font said only "bad value" over 9P and "does not take that value" from a tag, leaving the range to be guessed. The refusal, both ways, now says its range or what it takes, from one table beside the words. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look's miss cuts a long path in its middle with the Rerror cutter, keeping ↵Gabriel Schneider5 days
| | | | | | | | | | | | the file's name, never mid-word at 64 bytes "is no text to address" cut the path at 64 bytes, often mid-word and losing the file's name, and the other misses cut theirs at 256 from the end, losing it too. Every miss now goes through fitErr, the cutter an Rerror uses, which gives up the middle of the longest path so the start and the name at the end both stay. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Jumplist fills its one +Jumps again, as Recent does, never opening a secondGabriel Schneider5 days
| | | | | | | | Each Jumplist opened another +Jumps below the asking pane, so a few clicks stacked stale copies of the list. Recent's refill of its own pane is now shared, and Jumplist uses it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* After a ThemeFile, the root ctl and DumpConfig say ThemeFile and its path, ↵Gabriel Schneider5 days
| | | | | | | | | | | so what they report writes back Both said Theme and the name inside the .zon, which no Theme knows, so writing the report back to /ctl failed with "no theme". While a loaded ThemeFile is the theme in effect they now say the word that loaded it. A Dump carries the line too, so a Restore reloads the file. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A builtin for one kind of pane is refused on another with why: Petscii, ↵Gabriel Schneider5 days
| | | | | | | | | | | | | Palette, Ascii, Filter, Togglettymode, the Pdf words, Mode and TreeContext Each of these did nothing, silently, on the wrong kind of pane, so a ctl or exec write of Palette to a text file answered ok as if it had acted. A builtin now declares the one kind it is for (needs), the registry reads it, and runBuiltinFrom refuses the rest before dispatch, as Repl and Edit already refused theirs. Mode and TreeContext, which take more than one kind, say their own refusal. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Save and Save path on a PDF or image pane are refused, "a PDF pane has no ↵Gabriel Schneider5 days
| | | | | | | | | | | | text to save", never a silent success A bare Save on a PDF or an image did nothing, and `Save path` returned without writing, both answered as done. Such a pane shows a file it does not hold as text, so there is nothing of its own to write. Save now refuses it with why ("Save: a PDF pane has no text to save", or an image pane's), and so fails the write that asked. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fs.md says a body write to a terminal is typed input, never a bracketed pasteGabriel Schneider5 days
| | | | | | | | | | | A write to a terminal's body goes to its child as typed keys: no bracketed-paste marks around it, even when the program set 2004, so a newline in it is Enter and a shell runs each line. fs.md did not say which, and a script cannot guess. It does now, and a test writes to a terminal whose program asked for bracketed paste and checks the bytes sent are only the ones written. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Save path logs a save record naming the path it wroteGabriel Schneider5 days
| | | | | | | | | | | Save of a pane's own file logged `save <serial> <name>`, and so did a scratch's `Save path` (the pane takes that name). A `Save path` that writes a copy of a file pane, or a terminal's scrollback, elsewhere logged nothing, so a follower could not tell the file was written. It now logs `save <serial> <path>` with the path written, once the host has written it (events.noteLogAs). fs.md's log table says so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Restore logs and names the whole path of the dump it reads, not the name ↵Gabriel Schneider5 days
| | | | | | | | | | | | | as typed `Restore x.dump.zon` read the DumpDir's x.dump.zon but logged `restore x.dump.zon`, and `~/d.zon` logged the tilde. A follower could not tell which file was restored. The builtin now resolves the name once (fs.restorePath: `~` expanded, a relative name the DumpDir's when one is there, else the current directory's) and hands that path to the host, which reads it and logs `restore <path>`. Its messages name it too. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A focus moved over 9P tells the programs that asked for focus reports, as a ↵Gabriel Schneider5 days
| | | | | | | | | | | | click does A program that set DECSET 1004 heard `CSI O` and `CSI I` when the keyboard moved by a click, a key or the window's focus, because update() checks after each event. A /focus write went through serveFs, which never did, so the program kept believing it had focus until the next input event. serveFs now runs the same check once a request has settled. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A 9P look keeps its leading blanks: an indented line, or blanks alone, is ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | | | looked for as written Every line written to look or exec went through Messages.next, which trimmed blanks from both ends. A look of ` indented` then found the first bare `indented`, and a diff's blank context line ` ` looked at nothing. A look's line is now its text: only its `\r` and newline go. lookAt keeps the blanks for the word search too; it expands `~` only for a look that starts with one, and the path, address and command readings trim for themselves as before. runSearch keeps a pattern's blanks, since a builtin's argument comes trimmed already. An exec line is trimmed as before. fs.md says so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A restored pane whose file is gone from disk comes back dirty, and Del asks ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | before throwing its text away A dump keeps a pane's text. Restored after its file was deleted, the pane came back clean: the watch's baseline read of the missing file failed quietly, and Del closed it without a word. Its text was then nowhere at all. Restore now checks the file: a local path with nothing on disk comes back as one deleted on disk, as the watch would have said. It says so once, logs `changed N deleted`, and is dirty, so Del, Exit and Restore ask first. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Kill with a name and nothing running says "Kill: nothing running" and ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | succeeds, as bare Kill does Bare `Kill` with nothing running is a message, not a failure: a script's Kill has nothing left to do. `Kill make` in the same state failed the write with "no running command has that first word", as though make were the mistake. With nothing running at all, named or not, Kill is now the message. It still fails when commands run but none has the word. The two tests that used `Kill zzz` as a builtin that always fails now use `Unmount zzz`. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look at file:3:0 is refused as addr 3:0 is: a column counts from 1Gabriel Schneider5 days
| | | | | | | | | addr refuses a column 0 with EINVAL, "address out of range: a column counts from 1". A look took `file:3:0` as line 3 with no column, since the parser holds no column as 0, and succeeded. Now a look whose column, or end column, is written as 0 is refused with addr's words and errno. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* DumpConfig's lines that set nothing start with #, and a line starting with # ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | runs as nothing at an exec, a ctl or the init file DumpConfig's information lines ("Platform: tty", "Startup config: ...") began with words. Written back, as the report means to be, or clicked, each ran as a shell command or failed as an unknown control message. Each now starts with `# `. A line starting with `#` is a comment, as in a shell: it runs as nothing, silently, at an exec, at the root's, a pane's or a column's ctl, and in the init file. Documented in fs.md and config.md. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* With no pane at all, the root look opens its file and the root exec runs its ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | | command in the session's directory /look and /exec run at the active pane, and with every pane closed they failed ENOENT, "file does not exist", about a file the writer never named. Now an exec runs as the workspace tag's would, in the session's directory: a builtin at the stand-in, a command in a command pane. An empty window's click now runs a command line too, not only session words. A look runs from a scratch made as New makes one, which also makes the column. That scratch is dropped, unannounced, when the look went to another pane, so opening a file leaves only the file. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The ctl word name refuses a leading blank, as the name file doesGabriel Schneider5 days
| | | | | | | | | | `name /tmp/x` written to a pane's ctl trimmed the extra blank and named the pane /tmp/x. The same name written to the name file was refused with "a blank at its start", which fs.md gives as the rule, so the name a script wrote is the name it gets. The ctl word now hands the name file everything after its one separating blank. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A builtin that takes no argument, written with one to an exec, is refused ↵Gabriel Schneider5 days
| | | | | | | | | | | | wrong #args as at a ctl At a ctl, `Config extra` and `DumpConfig extra` were refused with `wrong #args`. Written to an exec, the builtin match missed, since the word takes no argument, and the line ran as a shell command named Config, which did nothing and said nothing. An exec now refuses it with the ctl's words. A setting word keeps its value (`Verbose off`). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* acme's Tab, Indent, Local, Incl and Abort are refused as acme words pardes ↵Gabriel Schneider5 days
| | | | | | | | | | | | | has not, never run as shell commands The five were missing from the refused list, so at an exec or a ctl a typed `Indent on` fell through to the shell as a command named Indent. pardes has no equivalent for any of them: its tabs and indentation follow the file, commands always run in the pane's directory, and there is no include path or abort. They now get the same "invalid: acme's X is not a pardes builtin" as Zerox or Send. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A word at /tagexec or a column's exec that makes, acts on and focuses no ↵Gabriel Schneider5 days
| | | | | | | | | | | | pane reads back nothing Newcol written to /tagexec read back `1`, the pane with the keyboard, which the word never touched. That was a pane word's fallback (a pane's exec answers the pane it ran at) applied to a tag no pane owns. A word in a column's or the workspace's tag now answers the pane it made, refilled, went to or focused, and otherwise nothing. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A control character in a write to any ctl file refuses the whole write, and ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | | a refused line is quoted with its control bytes shown as blanks fs.md already promised that the whole of a write to /ctl, a pane's ctl and a column's ctl is checked first, as it is for exec and look. But a ctl write ran its lines one by one, so a line holding a control byte gave that line's own, misleading reason ("unknown command"). Worse, the reason quoted the raw byte back into the err record. The check now happens in tree.write before anything runs, with the same EINVAL and reason exec gives. A refusal's quoted line shows control bytes as blanks, so an err record never carries a raw escape. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An append to a body through 9P costs its own bytes, not five passes over the ↵Gabriel Schneider5 days
| | | | | | | | whole body: 60 KB appends go from 35.7 to 2.1 ms each Round 25 measured bulk body writes at about 8 ms a write. There is no frame wait in it: a profile of open, write, clunk in a loop found the flush of each close walking the whole body five times. dotOf, setDot and showOffset turned the cursor between offsets and rows by counting every newline from the top; setContent found the line index's changed span by comparing old and new byte for byte, and hashed the new text to see whether it was back to the saved one. The rows now come from the file's line index by binary search (checked against the counting at every offset), a splice tells setContent the span it changed, and the text is hashed only when its length is the saved text's. Measured over 9P on a Debug build: 60 KB appends 35.7 to 2.1 ms, 8 KB 5.3 to 0.8 ms, 1 KB 1.3 to 0.9 ms. What is left is two copies of the text an edit (the splice's and the undo snapshot's). The perf gate gains body-appends, 64 appends of 8 KB on the 50k-line file, and its three baselines are recorded again. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Config opens the startup file, DumpConfig the settings report, and the ↵Gabriel Schneider5 days
| | | | | | | | | | | | | | | | | | | | | | | | | | workspace tag reads Dump Themes Config Debug Exit Config (SPC f c) opens init, found as the settings report finds it (opts.startup_config_path: $XDG_CONFIG_HOME/pardes/init or ~/.config/pardes/init, and the macOS and Windows paths config.md gives). A pane that already holds it is gone to instead; a file on disk is looked at; with none, an empty pane is named for it, and Save makes its directory and any above it first (File.make_dirs, fs.makeDirs) before writing. Without a configuration directory it says so and opens nothing. The report Config used to open, the startup path and every live setting, is DumpConfig, in a +DumpConfig pane. No alias keeps the old meaning. The workspace tag's default words put Themes where NextColor was, NextColor staying a builtin, and Config beside it. A tag the user edited is kept as it was: a dump stores only an edited one (topbar_custom), and a restore puts back only that. theme.snap types NextColor onto the workspace tag to click it, and tagnav's walk back to Dump takes five long-word steps. The rest of the re-recorded goldens differ in the workspace words and their widths only. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Terminal.zig is terminal.zig: a file of functions and no fields takes a ↵Gabriel Schneider5 days
| | | | | | | | namespace's lowercase name The last of the deferred renames, now that the tty and theme agents have landed: panes.terminal at its importers, the alias lines in Text.zig and File.zig and panes.zig's own uses following. dump.zig's Terminal struct, a dump record, is not this. The served sources list and docs/design.typ name the new file. test/perf.zig's references change, so the three perf baselines take its new harness id with their numbers as recorded. No behaviour changes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
generated by cgit v1.3 (git 2.53.0) at 2026-10-05 23:27:47 +0000