| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
program was killed there is no longer busy for ever
htop killed with `sig KILL` leaves the emulator on its alternate screen;
bash comes back and draws its prompt there, marks and all, but
promptInputReady refused any prompt on the alternate screen, so
pty/status said busy 1 and pty/run answered a bare `busy` for good.
A prompt mark there now counts. A run sent at such a prompt leaves the
alternate screen in the emulator first, as a reused command pane does,
so its output lands on the primary screen and is read whole, not
`exit 0 cut` with nothing. Busy there with no prompt drawn, and no
program name to give, a run is told `busy alternate screen`.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
whole; cut only when its start really scrolled away
A clear (ED 2, ED 3, a reset) under a running command marked its output
lost, so `clear; ls` answered only "exit 0 cut". The output's start is
now pinned again at the screen's top after the erase: what the command
prints from there is its answer, whole, and a cut is said only when
that start leaves the scrollback.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
4096x4096 as the docs say
`winsize 20 1` was taken and quietly raised to 2 rows, so the write
succeeded with a size other than the one asked for. The range refusal
also said "1x1 to 4096x4096", although fs.md says at least 2 rows. One row
is now refused with "invalid winsize: at least 2 rows", and the range
text starts at 1x2. size already refused anything under 20x6 with a text
that names it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
empty whole
pty/run reads a command's output between its C and D marks. When the
end landed at or before the start, it answered `exit 0` with no output,
as if nothing was printed. That happens when the shell redraws its prompt
over the output, as it can in a window two rows high (winsize 10 2). Now
only equal marks mean nothing was printed. An end at the top-left cell
or above the start says `cut`, since how much was printed is not known.
bash, fish, long lines and 3000-line outputs at winsize 10 2 all came
back whole on this build, so the dogfood's loss could not be reproduced
directly. The test drives the marks into the inverted case the loss
needs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
| |
namespace's lowercase name
The last of the deferred renames, now that the tty and theme agents have landed: panes.terminal at its importers, the alias lines in Text.zig and File.zig and panes.zig's own uses following. dump.zig's Terminal struct, a dump record, is not this. The served sources list and docs/design.typ name the new file. test/perf.zig's references change, so the three perf baselines take its new harness id with their numbers as recorded. No behaviour changes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
| |
Two lines -- in one write, or as bash writes them, a line at a time on one open -- each ran, and the first's answer was lost under the second's. A write with more than one line, or a next line before the last answer is read, is now refused, EINVAL.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
| |
exec on a finished command pane ran its line again, silently, with no header, footer or records. It is now refused, EINVAL, invalid exec: a command pane does not restart.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
| |
is a real refusal or says why it cannot fire
A sweep for round 23's crash: a run's answer (pty/run) was bufPrint'd into 48 bytes with catch unreachable, so a foreground program's long name (macOS gives up to 32 bytes) panicked; it now cuts at the room, keeping its newline, in 96 bytes. The rest were numbers into buffers sized for them, a braille codepoint, pthread calls on the queue's own mutex, and pdf_view's resolved outline entries: each now carries a one-line comment saying why it cannot fire.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
| |
Each host closed the running shell before it forked the new one, so an exec whose shell failed left the pane with none and later runs answered error shell gone. A shell not there is now refused up front, and every host starts the new shell first, replacing the old only once the close-on-exec pipe says it ran; a failure there is only said (restartFailed).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
removed under a shell leaves its name
`exec` on pty/ctl restarted a shell in a directory that was gone, the
write succeeding and the pane dead; and the pane was then renamed
`<dir> (deleted)` from /proc, so a restart failed even once the directory
was back. `exec` is now refused up front, ENOENT, where the directory is
gone; a shell the host cannot start fails the waiting write (late
failure, as a Save's); and a `(deleted)` cwd is no name to take.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
started answers runs
The host could not start the shell (its chdir failed), and the pane stayed
with no pty: a run written to it waited for a prompt for ever. Tty now
refuses a directory that is not there, `Tty: <dir>: no such directory`,
before making a pane; and a terminal whose shell the host could not start
(Pardes.shellFailed, from each host's spawn) answers any run with
`error shell gone`.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
busy for ever
A one-row pty loses the prompt's input mark as soon as the prompt wraps,
and busy detection never sees the shell idle again. Placement already
keeps a new terminal at tag + 2 rows; a winsize write now keeps the pty
at two. A pane dragged down to one body row keeps a one-row pty, since
a taller pty than the pane shows would put its cursor below the pane.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
A terminal's directory rode inline in the spawn effect, capped at 256
bytes, so Tty in a directory of about 377 bytes said path too long. A
directory past the inline buffer now goes out of line (Pardes.spawn_dirs,
given to the host when the spawn is performed), up to the host's path
limit (4095); past that, Tty says its directory is longer than a path
may be. The effect queue stays its size.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
| |
The workspace had /tagexec and a column its exec, but a pane's own tag
could be clicked only by an event record. pane/<n>/tagexec runs each line
as a click in that pane's tag (never redirected to its event reader, as a
header's is not) and reads back what it touched. The README, fs.md and
the skill list it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
| |
winsize 0 0 was refused as ill-formed, as if the words were wrong, and
any u16 was taken. Numbers that are no size (0, or past 4096 a side, the
root ctl size's bound) now say invalid winsize: out of range, 1x1 to
4096x4096 (EINVAL through a mount).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
| |
busy said only that something ran. Where the host can tell (Linux, the
tty's foreground group's /proc comm, a new fg_name host call), it says
busy: <program> is running; elsewhere, busy as before. The GUI's host
gains the one small callback (render agent's file: gui.zig, fgName).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
A dogfood agent ran `exit 3` through pty/run: the reader got ENOENT, and
the log went straight to del. The hosts now read a shell's exit status at
its pty's end as they do a command's; a run waiting on the line answers
`exit 3` with what it printed, the log says `exit <serial> 3` before
the pane's `del`, and an open run still stats after its pane is gone
(cat fstats its input). Pins cloud9 f35b7ed, whose stat of an open fid names
its open. Writes to a gone pane's pty/data, held open or not, fail ENOENT.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
| |
A dogfood agent wrote winsize 100 30 to pty/ctl and pty/status went on
reporting the pane's grid, and the status line had no newline to end it.
The size winsize sets is kept until the pane resizes and gives the pty its
grid again; ctl's winsize read back and status both report it, and status
ends with a newline.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
acme's frame wraps a tag at its right edge and the window grows to show
every row (wind.c wintaglines); Tagup/Tagdown shrink it to one row and back.
Pane tags used to be one row, scrolled sideways to the caret. Now a tag's
lines wrap at its width (one cell kept for the caret past a full row) and it
starts expanded; insert-mode Up on the first row collapses it, Down on the
last row expands it, and Alt-Up/Alt-Down do so in either mode. A word the
wrap breaks across rows is still one word to a click and a selection.
Column and workspace tags keep scrolling sideways.
Tests read body rows relative to the body's first row; the 41 snapshot
goldens that moved were re-recorded by name after a programmatic check that
each differs only by body rows shifting under the taller tags, and twelve
scripts whose clicks targeted fixed rows now click the same text.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
| |
where there are no terminals
pty.zig reached into a terminal's stream handler, which is void on esp32p4, so the board build stopped at readStatus and writeRun. Both now know at comptime that such a build has no marks.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
| |
A failure read `Del k|j: InvalidArgument`, `Kill: NoSuchCommand`, `ill-formed control message`, or nothing at all. reportError now spells an error's name as words, and the refusals name their accepted forms: pty/ctl lists its verbs, a flag file takes 1 or 0, a setting word takes on or off, Del takes k, j or nothing, Repl takes - or a language. Kill with nothing to stop says so, /focus says pane, a Look that found nothing says no match, and pty/run on a command pane says it is not a shell. A ctl write's failure has room for the Repl list and is cut between words, the Repl word at a character.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
A signal effect carried only a slot, so a Kill followed in the same step by
the pane's closing and its slot's reuse signalled the new pane's child; and a
command pane whose child had exited and been reaped kept a process group id
another process could take. The effect now carries the pane's serial, checked
as it is performed, and a host signals no command whose exit it has recorded;
the core already sends Kill only to a command it has not been told is done.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
retaken spawns nothing
The spawn effect carried only a slot, and the host read the command and shell
off whatever pane held the slot as it forked: a command pane closed and its
slot taken by the next one before the effects ran forked the new pane's
command twice. The effect now carries the pane's serial and is dropped when
the slot holds another; forkShell checks it again after giving up the turn
for its directory's stat, the one moment a 9P client can change the panes
under it. Every front end performs spawns with the turn, from its step.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Kill quit the editor, which in acme is Exit; acme's Kill stops the
commands it started. Exit now quits as acme's does (exec.c, rowclean):
it refuses once, naming each pane with unsaved text, and quits when
asked again with nothing edited since (a small scratch is not asked
about). Kill, bare or with names, stops the commands pardes typed into a
terminal (an exec, a middle click, a pty/run) while their shell's marks
say they run, by SIGTERM to the terminal's foreground job, never to the
shell (acme posts the kill note, which terminates). Both are session
builtins; the topbar's Kill becomes Exit, same width, and every golden's
topbar row changed by exactly that word (checked line by line); the
builtins script scrolls one more row for the index's new line.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
| |
The log said new N / and later del N <cwd> for a terminal, with no rename
in between, though a terminal is named by its directory. setCwd now logs
the rename once the pane has been announced. A terminal's ctl line gave
body length 0 while its body reads its history; it now counts that
history (without keeping a copy).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
answering busy
A new terminal's shell takes tens of milliseconds to draw its first
prompt, and a run written meanwhile answered busy, so a script's first
command was lost, while pty/status said busy 0. A line written before the
first prompt now waits for it and is sent then (a respawn in between
keeps it waiting for the new shell), and pty/status's third field says
what a run would be told: busy while a command runs or text is typed at
the prompt, not before the first prompt.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The detached server closed a pane's pty only when the shell was respawned,
hit EOF or the session shut down, so rmdir, Del or Delcol on a terminal
left its shell running with nobody to read it; the tty front end and
macOS did the same. Retiring a terminal pane now emits a close_pty
effect, which each host that runs shells answers by hanging the pty up
and ending the shell (the detached server's and the GUI's existing
retire-and-reap path, and a close plus SIGHUP in the tty and macOS
shells).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
reads, paneFileNamed, topFileNamed, serialNamed, attrReply, makePane,
events.pending, mtimeOf, versionOf, dirOf, cellOf, shiftBy, flagOf,
stageIndexLine, ctlLen, listenersLen, activeSerial, fontName and
Serials.has each wrapped a line or two used once or twice; the logic now
reads where it is used. Helpers that do several things or are shared
widely (bodyOf, fileOf, dirtyOf, nameOf, kindOf, clip, readRange,
readFlag, pty's answer and waitingRun, nextSerialAfter) stay.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
shut down
The held read is now kept by the Ticket cloud9's Conn.hold() gives its
park and answered through Conn.answerWith(), which makes the answer only
while that very park still waits, instead of walking the engine's slots
by tag; pardes no longer reaches into the engine for it. A second read on
an open whose read is held fails with file in use rather than sitting
parked where nothing answers it, and a read that waits with no open
record to hold it is logged and asserted on. A read on an event or
pty/data open whose pane closed answers acme's "window shut down"
(editors/acme/xfid.c:1005). The pane keeps its run's and its lock's open
handles, checked through openOf on use, not record indices. Docs: lock
from a shell needs a held fd, and a command that clears the screen may
read as cut.
Needs cloud9 zvuqvnzy (cca47d63), which adds Conn.hold, waiting and
answerWith; build.zig.zon still pins 82d8152c until that is pushed and
re-pinned.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
A clear or reset while the command ran, a start or end mark that came on
the alternate screen, or a garbage end pin read as a complete answer;
now any of them, like a start that scrolled out, answers exit N cut.
The output is read from at most output_rows rows above its end instead
of the whole history on the editor's thread (cut if that clips it), a D
with no status answers exit ? rather than exit 0, and running out of
memory answers error out of memory rather than cut.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Snapshots (and /log's cursor), runs, and the reader_handle constants for
event and pty/data each reused the open handle and each validated
handle and node on its own. Now p.fs.opens is one table of 64 records,
each the node it was opened on and a tagged union of what it holds, like
lib9p's per-fid aux and acme's Fid (editors/acme/dat.h:373-385): one
lookup (openOf), one release, ENFILE when full. A held read lives in
its open's record, so it goes with the release. Opens that hold nothing
answer handle 0 and take no record.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
addr, limit, the event queue and its readers, pty/data's queue, a waiting
run and the /log announcement flag lived in p.fs.panes[slot], reset when
the pane went; a reused slot is how the bug class came in. acme keeps the
same state on its Window (editors/acme/dat.h:226-266), so now Pane.fs
holds it: announced, retired (noteRetire, which still answers a waiting
run and drops the listener count first) and freed with the pane itself.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
A following log, event, pty/data or a pty/run before its answer used to
answer .again and wait for a wakeAll, which only the parked-write path
asked for, so the band-aid had every queue push set turn.parked. Now the
core keeps such a read (ctlfs.hold) and, as the turn is given up after
anything that queued a record, ran a command out or closed a pane,
answers it on its own connection, the way factotum answers the log reads
it keeps and acme an event read. Only a read the engine still holds
parked is answered, because cloud9 tells the backend nothing of a
Tflush, so a flushed read spends no record.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
and E.BUSY
The answer is now the header line (exit N, or exit N cut M when only the
last 64 KiB were kept, or exit N cut when its start scrolled out of the
history), then what the command printed: the screen text between its C and
D marks, which the marks handler pins so scrolling keeps them.
Also from review: a plain /log open honours its offset until follow is
written, so tail -n and less work; whitespace-only run lines are refused.
cloud9 is pinned at 82d8152c: 9ns keeps up to 32 requests in flight per
mount so a waiting read no longer freezes the rest of it, and E.BUSY
replaces the errno pardes spelled locally.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Review fixes to pty/run and /log:
- Both are streams with a per-open cursor. A shell's exec 3<>file shares
one offset between write and read, so cat <&3 after echo make >&3 asked
for offset 5 and got "0" instead of "exit 0"; log after follow lost its
first bytes the same way.
- A run is accepted only in pardes's own tagged input phase, so a nested
shell's prompt (ssh, a shell with its own integration) is never taken for
this shell's.
- A line the shell refused is taken back so the next finds the prompt
clear: bash's continuation prompt (now tagged k=c) gets Ctrl-C and the
answer waits for the fresh prompt; a bash syntax error (no C, but a D) is
answered at once; fish's kept line gets Ctrl-U (a Ctrl-C sent while fish
redraws is lost). fish's right prompt no longer reads as typed input.
- bash marks a command's start from PS0 on bash 4.4+, not a DEBUG trap, so
a user's own DEBUG trap (bash-preexec, atuin) survives. bash's own job
notices now show as in plain bash (ttyfollow golden).
- 32 run slots; a new line on an open starts a fresh answer.
Checked live in bash, fish, and fish with a right prompt.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
/pane/<n>/pty/run takes factotum's rpc shape: write one line on an open,
read the answer on that same open. The answer is exit N once the command
ended and the shell is back at a prompt; busy at once when a command runs,
text is typed at the prompt, or the shell has not drawn its first prompt;
error not run when the shell refused the line without running it (fish on
a syntax error keeps it on the prompt, so it is taken back with Ctrl-U);
error shell gone when the pane closes or its shell is replaced; error no
prompt marks for a shell pardes could not instrument.
The end comes from the shell's OSC 133 marks. ghostty parses D's exit
status and drops it, so the stream now runs through a handler that wraps
ghostty's and follows prompt -> input -> running -> done. The marks pardes
injects into bash and fish carry aid=pardes and only those count, so fish
4's own marks (which doubled ours), a nested shell's, and a stray 133;D in
printed output are ignored.
Checked end to end against real bash and fish: false, exit 7, a syntax
error, sleep, busy while running, and the pane closing mid-command.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
file; pty/ctl reads back
A read parked on a queue was retried only when some unrelated write had
to wait, so a follower of /log (and a reader of event or pty/data) slept
until then. Pushing a record now marks the turn parked, and giving the
turn up wakes them (measured: stuck past 3 s before, 0 s after).
event and pty/data consume what they read, so a second open for reading
is refused with rio's "file in use" (EBUSY through 9ns); writers still
get in, and pty/data queues output only for an actual reader. pty/ctl
reads back "winsize C R", in the words it takes.
/log fixes from review: a record longer than a read comes in pieces (a
shell read loop failed on long lines), every repeated message is logged,
a record bigger than the ring is cut to fit instead of emptying it, the
ring is reserved at boot so recording never allocates, and panes present
at boot are recorded first.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Tcreate that replaced acme's /new was a step away from the idiom dressed
up as a step toward it. A pane is named by a server-assigned serial, so the
create ignored the client's name: `mkdir /pane/foo` succeeded and left you
/pane/12. A mkdir that does not make the directory you named is worse than the
read-with-side-effect it replaced, and it broke in the shell workflow that
motivated the change. `create` is out of the declared features, so Tcreate is
EPERM again; Tremove stays, since `rm` to close a pane is unambiguously right.
/pane/new is now opened, not created: the open makes the pane, the read of
that fid answers its serial, two reads agree, and closing it leaves the pane.
That is /net/tcp/clone's mechanism (kernel/network/ip/devip.c, in ipopen),
not acme's, and the difference is deliberate. acme allocates during the walk
and lands inside the new window, so /dev/new/body works in one step, and it
can afford to list `new` because a Plan 9 directory read carries every entry's
stat and nothing walks. A kernel or FUSE mount walks and stats each name a
listing gave it, so allocate-on-walk would make a pane per `ls -l`. Allocating
on open keeps `new` listed -- a stat is not an open -- at the cost of the
one-step new/body. `new` stays unreachable from an editor path, because that
resolution serves Look hover previews.
The idiom pass behind it, read out of the Plan 9 tree at
~/05-genizah/principia-softwarica rather than recalled:
Rerror carries a string, not an errno (man 5 error: `ename[s]`), and acme
names every refusal. The five refusals pardes shares with acme now say what
they mean; the generic sites keep their bare errno rather than invent strings
acme does not have. body and tag declare DMAPPEND, which they had always
behaved as (acme(4): "always appended; the file offset is ignored"), checked
first against Linux's fs/9p, which never maps the bit. excl stays unset
everywhere, because acme sets DMEXCL on nothing. Blocking reads, per-object
addr scope and the readable pane ctl were already right. Real stat sizes and
qid versions stay: acme reports length 0 and version 0 for everything, and
Linux clients need better.
One bug fell out of it. open reset the addr range, so `echo '#0,#5' >addr;
cat addr` answered `0 0` and `cp addr dot` copied zeros. acme(4) makes the
contract explicit -- "a regular expression may be evaluated by writing it to
addr and reading it back" -- and acme gets away with resetting on the 0-to-1
open only because its clients hold the fid across both. A shell cannot: that
is two opens. The register is cleared by truncating it now.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The 9P tree stops being a command language wearing a filesystem. /new
created a pane as a side effect of a *read*; it is now Tcreate in /pane,
with Tremove to close, which cloud9's engine has always supported and the
editor never declared: tree.zig now says
`features = .{ .create = true, .remove = true }`. Eleven pane ctl verbs
become files that can be read as well as written -- dot, limit, dirty,
mark, scroll, look, exec -- leaving ctl with `get`, the one verb no file
would say better. Root /ctl splits into a read-only /status and the
/look and /exec files whose write IS the click. stat carries real sizes
where it used to answer 0, and qid versions track a pane's revision, so a
client can poll for change without re-reading the body.
Commit a624a56 moved raw-tty keys to an early-return branch that knew only
Ctrl-B and bare Escape, and in the same edit deleted the paste branch below
it. That cost Shift-Escape (the unconditional way out of tty mode) and both
paste chords: Ctrl-V and Ctrl-Shift-V reached the child as keystrokes, so an
agent CLI running in a pane took Ctrl-V for its image-paste binding and
answered "No image found in clipboard". Both are restored, with tests.
Nested detection was not subtly broken but deleted: 60367d8 removed
nested.zig's process-ancestry walk and left "am I inside pardes" derived from
PARDES_FORWARD_LOOK, which read "0" both for --nested and for "the listener
did not come up". PARDES_PID now answers that question on its own, checked
with kill(pid, 0); PARDES_9P and PARDES_PANE answer how to reach it; the flag
is gone. The posted-9P registry also self-heals now -- a session that aborts
cannot unlink its own socket, so posting sweeps entries whose target refuses
a connection, symlinks only and on a definite ECONNREFUSED only.
Elsewhere: tty scrolling is sticky-bottom, following new output only from
the last row, with typing and entering raw mode snapping back to live; the
boot layouts are a Boot enum instead of a chain of ifs, and the bare tty
startup (Boot.tty, which main.zig names) opens an empty text pane under the
shell while tests keep Boot.tty_shell; builtins announce themselves on the
message row under a Verbose setting that is on by default; Config prints
each setting the way you would type it back, so WindowOpacity 70 rather than
"WindowOpacity: 70%"; LocationsConfig opens its window only when called bare;
every tagline puts the word that closes the thing last, and a column now
outlives its panes -- closing the last one leaves an empty pane, and only
Delcol, newly on the column tagline, takes the column away.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
|
|
The served tree loses the self/ level: /index /ctl /new /log /screen
/listeners /pane/<n>/... /os, with /src only in -Dembed-sources=true builds
(default off, on for esp32p4). ctl speaks the editor's own language with two
lowercase verbs, look TEXT and exec TEXT, plus acme's addr verbs; the new/
factory directory becomes one clone file; cons is gone (exec Msg); name and
sel are files; stats report real lengths, modes and mtimes; /log streams
pane new/del/rename/save events. The tree code lives in src/ninep/
(tree, pane, ctl, addr, pty, events, screen, sources); fs.zig keeps host
access, mounts, resolution and find/grep. Same engine and transports.
README (fs-help.txt) and docs rewritten; tests updated and extended.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
|
