summaryrefslogtreecommitdiff
path: root/src/ninep
Commit message (Collapse)AuthorAge
...
* Column serials go on across a Restore as pane serials do: a restored column ↵Gabriel Schneider29 hours
| | | | | | | | | | | | never takes a serial the old session handed out A Restore carried next_serial over for panes but started column serials at 1 again. So a restored column could take the serial a deleted column had, and a script holding col/<n> from before the Restore would find a different column there. The column counter is now carried over like the pane one, and restoredcol maps each old serial to a fresh one. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A control character in a write to any ctl file refuses the whole write, and ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | a refused line is quoted with its control bytes shown as blanks fs.md already promised that the whole of a write to /ctl, a pane's ctl and a column's ctl is checked first, as it is for exec and look. But a ctl write ran its lines one by one, so a line holding a control byte gave that line's own, misleading reason ("unknown command"). Worse, the reason quoted the raw byte back into the err record. The check now happens in tree.write before anything runs, with the same EINVAL and reason exec gives. A refusal's quoted line shows control bytes as blanks, so an err record never carries a raw escape. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Pane, column and workspace tags take one set of write checks, and a refused ↵Gabriel Schneider29 hours
| | | | | | | | `>` write leaves the tag as it was A column's or the workspace's tag took any length, so a write past 4096 bytes went in and a later Dump failed on it (bad dump tag), and a truncating open wiped any tag before the write after it could be refused. The column and workspace tags now refuse what a pane tag refuses: the 4096-byte limit (ENOSPC, tag: no space: over 4096 bytes) as well as the control characters they already did. A truncation of any of the three is held until the write after it is known to fit, and done with it; a refused write drops it; a close or read with no write after it does it then (so `: > tag` still clears). A test runs a truncating write too long, a control character and a bare truncation at each kind, and Dumps after. docs/fs.md says so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An append to a body through 9P costs its own bytes, not five passes over the ↵Gabriel Schneider29 hours
| | | | | | | | whole body: 60 KB appends go from 35.7 to 2.1 ms each Round 25 measured bulk body writes at about 8 ms a write. There is no frame wait in it: a profile of open, write, clunk in a loop found the flush of each close walking the whole body five times. dotOf, setDot and showOffset turned the cursor between offsets and rows by counting every newline from the top; setContent found the line index's changed span by comparing old and new byte for byte, and hashed the new text to see whether it was back to the saved one. The rows now come from the file's line index by binary search (checked against the counting at every offset), a splice tells setContent the span it changed, and the text is hashed only when its length is the saved text's. Measured over 9P on a Debug build: 60 KB appends 35.7 to 2.1 ms, 8 KB 5.3 to 0.8 ms, 1 KB 1.3 to 0.9 ms. What is left is two copies of the text an edit (the splice's and the undo snapshot's). The perf gate gains body-appends, 64 appends of 8 KB on the 50k-line file, and its three baselines are recorded again. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Config opens the startup file, DumpConfig the settings report, and the ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | workspace tag reads Dump Themes Config Debug Exit Config (SPC f c) opens init, found as the settings report finds it (opts.startup_config_path: $XDG_CONFIG_HOME/pardes/init or ~/.config/pardes/init, and the macOS and Windows paths config.md gives). A pane that already holds it is gone to instead; a file on disk is looked at; with none, an empty pane is named for it, and Save makes its directory and any above it first (File.make_dirs, fs.makeDirs) before writing. Without a configuration directory it says so and opens nothing. The report Config used to open, the startup path and every live setting, is DumpConfig, in a +DumpConfig pane. No alias keeps the old meaning. The workspace tag's default words put Themes where NextColor was, NextColor staying a builtin, and Config beside it. A tag the user edited is kept as it was: a dump stores only an edited one (topbar_custom), and a restore puts back only that. theme.snap types NextColor onto the workspace tag to click it, and tagnav's walk back to Dump takes five long-word steps. The rest of the re-recorded goldens differ in the workspace words and their widths only. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Terminal.zig is terminal.zig: a file of functions and no fields takes a ↵Gabriel Schneider29 hours
| | | | | | | | namespace's lowercase name The last of the deferred renames, now that the tty and theme agents have landed: panes.terminal at its importers, the alias lines in Text.zig and File.zig and panes.zig's own uses following. dump.zig's Terminal struct, a dump record, is not this. The served sources list and docs/design.typ name the new file. test/perf.zig's references change, so the three perf baselines take its new harness id with their numbers as recorded. No behaviour changes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
*---. Merge: loose end + msize 64K + docs slimming + docs-audit fixes + monkey-gui ↵Gabriel Schneider29 hours
|\ \ \ | | | | | | | | | | | | + tty ssh acked frames
| * | | Newcol shares a column's rows out again when its narrower tags would leave a ↵Gabriel Schneider29 hours
| |/ / | | | | | | | | | | | | | | | | | | | | | pane under its tag and two rows, or is refused A seeded sweep of placements (New, pane/new, Edit =, Tty, look, Delcol, deletes, refusals included) over screens 6 to 40 rows high found no refused placement that leaves a pane short since lyltlqnz and lrpzwyom; the pane a row short came from Newcol, which halves a column's width so long tags wrap onto more rows, raising those panes' minimums with no rows moved. Newcol now shares each such column's rows out again, and where a column has not the rows for every minimum there is no new column (Newcol: no space for a column: the panes' tags would not fit), as a size too small is refused. The sweep, 300 seeds, is the test; a user's drag or a tag grown by editing may still take a pane under, as before. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | A tag write past the limit says tag: no space: over 4096 bytes, which 9ns ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | | | | | | | | | maps to ENOSPC as the docs say The tree answers ENOSPC, but through a mount 9ns maps the words, and tag: over 4096 bytes carried none it knows, so a shell saw EIO. The words now hold no space; docs/fs.md says ENOSPC again. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | | A 9P error past 128 bytes keeps its reason: the path in it gives up its ↵Gabriel Schneider29 hours
|/ / | | | | | | | | | | | | | | middle to … An Rerror carries 128 bytes (Plan 9's ERRMAX) and the engine cut longer text there, and a builtin's failure was first clipped between words to 256 with ...: either way the end, which says why, was what went. tree.handle now fits a long reason by cutting the middle of its longest path, else of the whole text, on a character boundary, and reportFailure fills its buffer the same way. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Only a write logs an err: a refused open or truncation, create or remove, or ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | a write to pane/new, is its error alone, and every refusal is said in words The one-failure rule is a write's. A refused remove, pane/new's open refused for want of a slot, and an OTRUNC open's refused truncation (data's after a failed addr) also logged an err, and a reply carrying only an errno reached the client as the C library's text (Operation not permitted). tree.handle now gives such a reply Plan 9's words, chosen so 9ns maps each back to its errno (EPERM's to EACCES, as Plan 9's does), and serveFs logs errs for writes only, not a write to pane/new, which is only read. docs/fs.md and the 9P skill say so, and that a look miss quotes what was written. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | One look logs one err: a file:addr whose file is not there is one miss ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | quoting what was written, and a refused placement is the look's only failure A look at utf8txt:#3 from a terminal searched for utf8txt, missed, then found the terminal no text to address: two errs for one write. It is now looked for whole, as zzq:2 already was, so every form's miss reads no match for "<as written>". A look whose new pane was refused a place went on to settle its line in the pane it stayed on and logged has no line N after the placement failure; it now stops there. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A name written whole with no newline is checked with its write, as the docs ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | now say, not at the close Round 24's no-newline rule (uwzuqzxp) already covers name, a lines file; the 9P monkey's close_runs_only_line_files repros were from a binary before it. This pins it with a test and corrects docs/fs.md, which still said such a name waited for the close. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Under pardes's placement a pane whose neighbour is in no column goes at a ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | column's foot, not nowhere After Delcol took the last column's panes, pane/new under Placement made a scratch that no column held, since a scratch was placed only under the asking pane, which was gone; a look from it then unwrapped the missing parent in belowParent and panicked (the 9P monkey's crash-e1873f34). Both now fall back to the foot of the active column, else the last. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Writes held before the shell's clock is first seen no longer overflow its ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | first step A 9P write served before a detached host's first pump holds its batch stamped at time 0, so nextWake said to wake at 20 ms while advance, seeing the clock for the first time, set stepped_ns days later and counted due - stepped_ns back past zero: an integer-overflow panic. It was what the 64 KiB msize trial hit in fs-test (restore detached space, the connection closing at the first write's clunk), a race any msize can lose. A batch's wake is now never before the next frame. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A class with non-ASCII runes matches them: [éa-z] is taken as (é|[a-z]), a ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | range up to 256 runes spelled out mvzr's classes hold bytes, and it refused a multibyte member as a bad expression. Rewriting the class before compiling, as ^a|^b already is, needs no mvzr patch; runes that differ only in their last byte go as one alternative (\xc3[\xa0-\xbf] for [à-ÿ]) so a 256-rune range fits the 512-operation limit, which counts the pattern as rewritten. A wider range and [^é] are refused, naming why. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A write to addr, limit or mark asks for no frame, so its close is not held ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | behind one Every write that changes a pane set needs_frame, an addr write too, so the editor drew a whole frame after each and the clunk that followed waited for the turn while it did: 0.5 ms (Debug) to 1.2 ms a clunk, what made addr and event write-back 4-10x acme's. An address, a limit and the mark flag are nothing drawn; their writes no longer ask for a frame. Clunk after an addr write: 0.518 -> 0.015 ms (Debug tty, fs.py client). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A pane's ctl reads acme's fields in acme's order, the undo and redo flags ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | included, then pardes's own Where plan9port's line has whether Undo and Redo have a step, pardes's had current, so a client reading acme's fields by position read a word for a flag. The two flags now follow the tab width, as in plan9port's winctlprint, and current|notcurrent and a REPL's id come after them. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A pane's ctl takes acme's ctl words, done by the files that replace themGabriel Schneider29 hours
| | | | | | | | | | | | name, put, clean, dirty, del, delete, dot=addr, addr=dot, limit=addr, mark, nomark, show and cleartag were unknown control messages. Each is now done by the file or builtin that replaces it (name, Save, dirty, Del, a Del that does not ask, dot and addr and limit, mark, the tag), checked with the rest of the write before any runs; dump, dumpdir, font, menu and nomenu are refused, EINVAL, saying where pardes does it or that it has no such thing. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | acme's words run as pardes's or are refused, never as shell commands: Put savesGabriel Schneider29 hours
| | | | | | | | | | | | Put, Get, Delete, Snarf, Cut, Paste, Zerox, Sort, Putall, Load, ID and Send written to exec or tagexec each ran as a shell command that exited 127, the write answering 0 -- a Put that looked like a save. Put now runs Save and Delete a Del that does not ask; the rest are refused, EINVAL, invalid: acme's X is not a pardes builtin (with where pardes does it, where it does), in exec and ctl alike. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A look that misses file:/re/ names the file and is logged as that file's pane'sGabriel Schneider29 hours
| | | | | | | | | | | | A miss said only look: no match for regexp, against the pane the look came from. It now says look: <file>: no match for regexp, on the pane of the file it searched. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A refused Delcol changes nothing: no +Unsaved opens, no focus movesGabriel Schneider29 hours
| | | | | | | | | | | | Delcol's refusal opened +Unsaved, placing a pane in the layout it was refusing to change. Its unsaved records and notice say which panes; the list pane is left to the refusals of the other words. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A tag write past the limit is refused whole, naming itGabriel Schneider29 hours
| | | | | | | | | | | | A write to tag longer than the room left was cut and applied in part. It now changes nothing and fails ENOSPC, tag: over 4096 bytes; the docs give the limit. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A repeated log record is counted only when its whole text repeats, not just ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | what was cut to fit (xN) compared records after msg and err cut long texts to fit, so two different long failures that agreed in their first 200-odd bytes were counted as one. The whole text of the newest counted record is now hashed, and a repeat needs it too. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | Mini with no argument is wrong #args, EINVAL; Find, Grep and Mini say their ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | names capitalised Mini needs a file but did not say so, so a bare Mini ran and failed EIO. It now requires its argument, refused wrong #args (EINVAL) as every such word is. Its failures, Find's and Grep's start with the builtin's own name (Mini:, Find:, Grep:), as the others' do. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A bad command inside an Edit block written whole is named, not the } after itGabriel Schneider29 hours
| | | | | | | | | | | | A command in a { block that failed to parse ended the block there, so its } was taken as a control message of its own and the write failed unknown control message "}". A { block not yet closed now runs to its } whatever fails to parse in it, and the error names the command (Edit: unknown command z), as the line-by-line path does. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | pty/run takes one line a run, its answer read before the nextGabriel Schneider29 hours
| | | | | | | | | | | | Two lines -- in one write, or as bash writes them, a line at a time on one open -- each ran, and the first's answer was lost under the second's. A write with more than one line, or a next line before the last answer is read, is now refused, EINVAL. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | pty/ctl exec on a command pane is refused: a command pane does not restartGabriel Schneider29 hours
| | | | | | | | | | | | exec on a finished command pane ran its line again, silently, with no header, footer or records. It is now refused, EINVAL, invalid exec: a command pane does not restart. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A failure said while a 9P write waits on it posts no msg, only the write's errGabriel Schneider29 hours
| | | | | | | | | | | | A failure the editor said as it performed a write's work (a Save's disk write, a shell, a language server) was posted as a msg and taken back out when the write's err was logged, which it cannot be once a log follower has read it: a follower saw both. Such a failure is now posted without a msg in the first place (fs.write_waits), and nothing is taken back. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | An open's writes in a row to one place go in as one edit: a 10 MB body write ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | is linear Each body or data write copied and hashed the whole buffer, so a write the mount cut in 8 KB pieces was quadratic: 10 MB took 50 s and a 1 MB insert into 10 MB 11 s, holding the editor's turn. An open's appends to body, or inserts going on at data's address, are now held and put in as one splice (one copy, one undo step, one line-starts pass) before any other request, the close, or the editor's step once the writes pause 20 ms. fs.py-driven: 2 MB 2.19 -> 0.16 s, 10 MB 50.17 -> 0.78 s, 1 MB data into 10 MB 11.49 -> 0.26 s. A body-2m case (2 MB in 256 KB writes on one open) joins the perf gate: 84023 -> 15785 us; baselines re-recorded. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | An Edit x gives each of its searches the step budget, and a search that ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | spends it says it took too much time The budget was the compiled pattern's, spent over every search an x made: Edit ,x/x+/c/z/ over 100k lines ran out and failed, blamed on backtracking. Each search now starts with the whole budget, and one that spends it says regular expression search took too much time, gave up. (Not "too long": 9ns reads those words as ENAMETOOLONG.) Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A pattern up to 512 characters compiles; a longer one is refused naming the ↵Gabriel Schneider29 hours
| | | | | | | | | | | | | | | | limit mvzr's Regex holds 64 operations, so a pattern much past 64 bytes was refused as bad regular expression. pardes now compiles into mvzr's SizedRegex(512, 64), and a pattern that is too long (told apart from a malformed one by compiling it with room) says it is longer than mvzr's 512 operations. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* | A ctl or exec line with no newline runs with its write and fails it, unless ↵Gabriel Schneider29 hours
|/ | | | | | | | it needs more A last line with no newline was held to the close, so printf bogus > ctl answered 0 and failed only in the log, Edit ,s/zzz/y/ too. A write shorter than its Twrite is the whole of what was written (acme takes each write whole): its tail runs then and a failure is the write's. It is held only when the parser says it needs more -- an open { block, an a/c/i text -- or when the write filled its Twrite and may go on (the listener tells the core the room, msize less its header). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Every catch unreachable, orelse unreachable and syscall assert outside tests ↵Gabriel Schneider29 hours
| | | | | | | | is a real refusal or says why it cannot fire A sweep for round 23's crash: a run's answer (pty/run) was bufPrint'd into 48 bytes with catch unreachable, so a foreground program's long name (macOS gives up to 32 bytes) panicked; it now cuts at the room, keeping its newline, in 96 bytes. The rest were numbers into buffers sized for them, a braille codepoint, pthread calls on the queue's own mutex, and pdf_view's resolved outline entries: each now carries a one-line comment saying why it cannot fire. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Delcol on the last column leaves the window, empty but for its workspace ↵Gabriel Schneider29 hours
| | | | | | | | tag, as acme's does The last column's Delcol ended the session. The window now stays, with only the workspace tag; Newcol, and New (which makes the column it goes in), start it again. A word run with no pane at all runs with a stand-in that is no pane, the root ctl takes session words, and pane/new makes its scratch in the session's directory. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A name refused for a leading blank says a blank at its startGabriel Schneider29 hours
| | | | | | Both ends said a blank at its end. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Not-found failures say it once, in plain words: grep: pattern not found, ↵Gabriel Schneider29 hours
| | | | | | | | callers not found The ENOENT that 9ns reads from a failure's words came from a tacked-on suffix, grep: no match, not found, definition: nothing found, not found, no shell "x", not found. They now say it once: grep: pattern not found, find: name not found, Callers: callers not found, definition: not found, shell "x" not found (...). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Recent or Jumplist row for a file that shrank lands on its last line, the ↵Gabriel Schneider29 hours
| | | | | | | | same by either route, and says so A +Recent row clamped silently and a Jumplist row missed (has no line N). Both are remembered places now: the look clamps to the file as it is, closed or open, and the message row says <file> has N lines now: at its last. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A new file, once saved, shows in /recent, openGabriel Schneider29 hours
| | | | | | A pane named for a file not yet on disk is not kept in Recent (round 22), and its Save did not add it, so the file stayed out of /recent while open. A Save that puts a file on disk now records it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A PDF that cannot be read fails its look with its path and whyGabriel Schneider29 hours
| | | | | | A truncated PDF said only look: <error>, with no path, where an image that cannot be read names both. It now says look: <path>: not a PDF pardes can read: <why>. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A second line written to name is refused EINVAL, in one write or on the same ↵Gabriel Schneider29 hours
| | | | | | | | open bash writes printf 'a\nb\n' a line at a time, so each line arrived as a whole name on the held open and renamed the pane twice. An open that has named its pane now refuses a further line, as a two-line write already was. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A buffer whose file was deleted on disk is dirty, and Del asks firstGabriel Schneider29 hours
| | | | | | A file deleted under an open buffer left dirty 0 and let Del, Exit and the rest throw the only copy of its text away unasked. It now counts as dirty, as acme's does, and the refusals ask about it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A listing freezes at its open, so a read in several chunks never splices two ↵Gabriel Schneider29 hours
| | | | | | | | moments /index and the other listings were rendered afresh for each read, so a client reading one in chunks while panes changed got rows from two moments spliced together (the fs-test flake). /index, /layout, /recent, /commands, /status, /listeners and a ctl opened only to read now freeze at the open, as /screen does. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Jumplist entry is (closed) only while no pane has its file openGabriel Schneider29 hours
| | | | | | A closed file's entries stayed closed after the file was opened again another way (a look, Recent), so Jumplist said (closed) of an open file and a step onto it reopened it. They are now that pane's as soon as a pane shows the file. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* +Unsaved drops a pane once it has closedGabriel Schneider29 hours
| | | | | | The list kept a pane's Modified row after the pane was closed (discarded), so it named text there was no longer anything to lose of. A pane's closing now takes its row out. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* After a failed address, one that goes from it (., +, -) says there is noneGabriel Schneider29 hours
| | | | | | addr kept the old address under a failed one, and an address written relative to it went from that old one. Such an address now fails with no address: the last one written to addr failed, until one that stands alone is written. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Symbols, Diagnostics and every language server list share their directory's ↵Gabriel Schneider29 hours
| | | | | | | | one +Search Only Find and Grep reused the directory's +Search; a language server's list made another pane of the same name each time. Every origin named +Search now shares it, but a plain word's search, which keeps a list a pattern for n/N to walk between. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A pattern with a newline and an anchor mvzr would misread is refused EINVAL, ↵Gabriel Schneider29 hours
| | | | | | | | as the doc says Its words named no malformed input, so 9ns read the refusal as EIO, and Edit's failed EIO directly. It now says bad regular expression: ..., and Edit's failure with those words is EINVAL too. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* addr takes a row's range, L:C-L2:C2 or L:C-C2, so a Recent, +Search or ↵Gabriel Schneider29 hours
| | | | | | | | Jumplist row pastes in The rows spell a range L:C-L2:C2 (inclusive), which addr read as L:C then back L2 lines. After an L:C, a - and a number is now that range, through its last character; the docs set both spellings side by side. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look at a corrupt image fails with an err rather than open a blank paneGabriel Schneider29 hours
| | | | | | An image stb_image could not read opened as an empty image pane, the look succeeding. The bytes' header is now checked at the look (stbi_info_from_memory), and one that is no image it reads fails the look, look: <path>: not an image pardes can read, making no pane. Co-Authored-By: Claude Opus 5.5 <[email protected]>
generated by cgit v1.3 (git 2.53.0) at 2026-10-02 08:09:57 +0000