summaryrefslogtreecommitdiff
path: root/src/ninep
Commit message (Collapse)AuthorAge
...
* A file changed on disk never reloads over unsaved editsGabriel Schneider33 hours
| | | | | | | | | | | | | | | A watched file rewritten on disk was loaded over a buffer's unsaved edits and its dirty flag cleared, so Exit and Del no longer asked about them. A clean buffer still reloads; one with edits keeps its text and stays dirty, says <file> changed on disk (get reloads it, Save overwrites it), logs changed <serial>, and its Save warns once before overwriting the newer file, as acme's Put refuses a file modified since read (exec.c:577); get asks as ever (winclean, exec.c:513). The restored-watch test's dirty case now keeps the snapshot, and the filewatch snapshot script (re-recorded by name) checks both halves: the edited pane keeps its edit and says so, the clean one reloads. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An Edit text block is found in linear time: only a . line is parsed againGabriel Schneider33 hours
| | | | | | | | | | | Finding where an Edit block ends parsed the whole block again for every line, copying it into the scratch arena each time: a 10k-line $a block took minutes and tens of GB. sam_edit.waitsFor says what the block waits for, and while that is a text block's . line, only such a line is parsed again (editEnd, shared by Messages and completeEnd), its copy freed. A 10k-line block now takes well under a second and 50 MB of scratch. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A command run from a column's tag gets its pane in that columnGabriel Schneider33 hours
| | | | | | | | | A command from a column's tag ran in a command pane at the foot of the last column, however far from the tag, and could reuse a finished one anywhere. It now goes to the tag's column, under both placements, and reuses only a finished command pane in that column. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* pty/run's busy names the program holding the terminalGabriel Schneider33 hours
| | | | | | | | | busy said only that something ran. Where the host can tell (Linux, the tty's foreground group's /proc comm, a new fg_name host call), it says busy: <program> is running; elsewhere, busy as before. The GUI's host gains the one small callback (render agent's file: gui.zig, fgName). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* unlock's refusal says pane, not windowGabriel Schneider33 hours
| | | | | | | "window not locked by this open" was acme's word; pardes has panes. Its test compares the constant, so it follows. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Repl's unknown-language refusal names a few whole and points to the restGabriel Schneider33 hours
| | | | | | | | | The refusal listed every language and was clipped to fit, ending mid-word. It now names six, those that start as the word did first (pithon: python), says how many more, and points at docs/tags.md, which lists them all. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An event write-back past the text says range past end of bodyGabriel Schneider33 hours
| | | | | | | | | A well-formed record whose range ran past the body (or tag) was refused as "bad event syntax", which sent a client looking for a typo. It now says "range past end of body" (or tag); a malformed one keeps the old words. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* size says its limits, keeps every pane its rows, and ptys follow their panesGabriel Schneider33 hours
| | | | | | | | | | | | size refused an out-of-range line without saying the range, took a size too small for the panes (leaving bodies of no rows), and a terminal squeezed to its tag kept a pty of its old size. The refusal now names 20x6 to 4096x4096 (a bare size is EINVAL like any malformed line), a size that would leave any pane less than its tag and 2 rows is refused and undone, and a terminal's pty is resized with its pane down to one row (only a folded or unplaced one keeps its grid). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Tty and Shell refuse a directory: not a shellGabriel Schneider33 hours
| | | | | | | | | | A directory passes access(X_OK), so Tty /etc made a pane whose shell exited 127 and Shell /etc was taken. The shell lookup now refuses a directory, and both say "not a shell: /etc is a directory" (Tty and Shell share one refusal, host_io.Shell.refusal). shellset's golden takes the shared wording (re-recorded by name). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs give the full-column refusal, an Edit block left open at close, and ↵Gabriel Schneider33 hours
| | | | | | | | | | | | byte columns Round 11's doc findings: the skill names the full-column refusal beside the 64-pane cap; fs.md and the skill say an Edit block still open when its open closes fails with unmatched { and an err; and line:col's byte columns get the tip for character columns from tools (the same on ASCII, else a search or #n). A unit test pins the unmatched { at close. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A detached session with no frontend takes its size from the root ctlGabriel Schneider33 hours
| | | | | | | | | | A --detach session nobody is attached to stayed 80x24, too small for an agent's panes, and nothing could change it. The root ctl takes size <cols> <rows> while no frontend is attached (refused while one owns the size), and a client that attaches later still sets its own (the server compares with the core's size). Documented with the 80x24 default. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Words from the workspace and column tags run in the session's directoryGabriel Schneider33 hours
| | | | | | | | | | A command or Tty run from the workspace tag or a column tag started in the focused pane's directory, though those tags have none of their own. As acme's row and column tags do, they now run in the session's directory, where pardes started (Pardes.sessionDir); a pane's tag and text keep the pane's. The same for /tagexec, a column's exec and ctl. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* +Errors with no room anywhere logs its text rather than fail the EditGabriel Schneider33 hours
| | | | | | | | | Edit's p and = put their output in +Errors, and when its column had no room the placement refusal failed the whole Edit. +Errors now tries every column with room, the last first, and with none its text is logged as msg records, a line each; the Edit succeeds. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An exec line over 1024 bytes fails the write, naming the limitGabriel Schneider33 hours
| | | | | | | | | | A command line longer than the 1024 bytes a command pane takes was said on the message row after the write had already succeeded. An exec write (the root's, a pane's, tagexec, a column's) now refuses it before anything runs, EINVAL with "a command line is at most 1024 bytes" and an err record; a builtin's line, a long Msg or an Edit block, is not limited. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A failed builtin's err replaces its msg, and (xN) is a running totalGabriel Schneider33 hours
| | | | | | | | | | | A builtin failing a ctl write logged its Verbose announcement, its words as a msg, and the write's err, so the same failure again never repeated the newest record and never collapsed. Its err alone is logged now (the msg is still shown and kept in +Messages). A repeat of a record a follower has read is a new line with the running total, (xN) being N in all. fs.md states both rules. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Shell refuses a name that is no executable, and bare restores the defaultGabriel Schneider33 hours
| | | | | | | | | | | Shell took any word and the host quietly ran another shell at the next spawn. It now refuses a path or name that is not executable ("Shell: x: no executable by that name", failing a ctl write, logged err), a bare Shell goes back to the default, and a default $SHELL that is not executable falls back to /bin/sh. shellset's golden takes the refusal on the message row (re-recorded by name). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* No placement leaves a pane shorter than its tag and two rowsGabriel Schneider33 hours
| | | | | | | | | | | | | | | | Placement could split a pane down to a tag and one row, or give a new one less. Every placement now checks the pane it made and each pane it shrank against its tag (wrapped at its width) plus two rows: where they lack the room, the column's tallest pane is halved instead, and where none can give it the new pane is refused with "no space for a pane in that column" (ENOSPC over 9P) and closed at the step's end, once its maker is done with it. splitBelow and splitParent leave two body rows (a boot layout, split before any row exists, is as before). Re-recorded by name: lookpanes (panes one or two rows lower) and splitparent (the 6-row squeeze now refuses); fs.py closes the scratches and long-named panes it no longer needs, since its 24-row session filled. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The default Shell is $SHELL, else /bin/shGabriel Schneider33 hours
| | | | | | | | | | With no Shell set, pardes ran fish, which a box may not have and a user may not use. The default is now the user's login shell ($SHELL), else /bin/sh; an explicit Shell still overrides it. The tests pin their own shell (snapshots bash, the python suites /bin/sh or bash) and pass with SHELL unset; the Config report and docs say where the default comes from. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A read on a closed pane's event ends ENOENT, and the pane cap is ENOSPCGabriel Schneider33 hours
| | | | | | | | | | 9ns reads an error's words, not its errno: "window shut down" came out as EIO where every other file of a gone pane gives ENOENT, and "no pane slots" as EIO. The event and pty/data reads a pane closed under now say "no such pane: its window shut" (ENOENT), and the cap says "no space for a pane: 64 max" (ENOSPC; 9ns has no word for ENFILE). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A pane closed with its question standing logs answer <serial> -Gabriel Schneider33 hours
| | | | | | | | A follower that saw ask never heard the question end when its pane closed first. Retiring a pane with a question still up now logs answer <serial> - before its del. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A msg said again word for word is that line counted in the logGabriel Schneider33 hours
| | | | | | | | | | 1000 Undos with nothing left made 2000 log lines: the Verbose announcement and the answer each time. A msg repeating the newest record is now that record counted, (xN), as err's already were (shared as pushCounting), unless a follower has read it; and a builtin's own words that start with its name take the place of its announcement just before them. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Undo and Redo with nothing left say so, and the write succeedsGabriel Schneider33 hours
| | | | | | | | | A pane's Undo or Redo with no step left did nothing and said nothing. It now says "Undo: nothing to undo" (or Redo's) as a message, not a failure, so a ctl write of it still succeeds as acme's silent Undo does. The docs give the 256-step history. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* addr reads empty after a failed address instead of failingGabriel Schneider33 hours
| | | | | | | | With no address after a failed write, a read of addr itself failed (EIO through a mount), which reads as a broken file rather than as no address. It now reads empty, as an unset limit does; data and xdata still refuse. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A limit write that fails keeps the limit it hadGabriel Schneider33 hours
| | | | | | | | | A shell's > truncates limit, which lifted it, before the write; a write that then failed left no limit at all. The truncation now keeps the old limit until that open's write, and a failed write puts it back; a bare truncation still lifts it once its open is released. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Addresses snap to runes, not grapheme clustersGabriel Schneider33 hours
| | | | | | | | | | sam and acme address runes; pardes snapped #n, line:col, dot and data's reads to grapheme clusters, so a lone combining mark or a CRLF's \r could not be addressed. #n, line:col, a search's match, dot (both ways) and data now land on rune boundaries (modal.runeStart and friends), and the tty's cell drawing is untouched. The README, fs.md and the skill say so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A line address past the last newline is sam's empty line thereGabriel Schneider33 hours
| | | | | | | | | Forward line addresses followed acme's number(), which refuses the empty line after a text's last newline, so 1 of an empty buffer and 2 of "a\n" were out of range and Edit 1i/header/ failed on an empty file. They now follow sam's lineaddr (editors/sam/address.c:180-215): #0,#0 and #2,#2. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A command line cut across writes runs once whole, and look/exec answer per openGabriel Schneider33 hours
| | | | | | | | | | | | | | | | A mount cuts a write at its message size, and each piece ran on its own: a line cut at the boundary ran as shell commands and a 50 KB Edit block broke. An open of look, exec, tagexec, any ctl or a column's exec now keeps an unfinished last line, or an Edit block still open, until its next write or its release, and never runs a fragment. The same open record holds what its last write touched, which a read on it answers (as /net/tcp/clone does); an open that never wrote reads the session's last as of its open. A release that runs a held line waits for quiet and counts as a change; a clicked line with a control character is still refused at its write. Tested in unit tests, fs.py (python client, 8 KiB) and selfmount.py (the kernel mount, a 1000-line seq burst and a 50 KB Edit block). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The workspace tag has /tagexec, every exec file reads back what it touched, ↵Gabriel Schneider33 hours
| | | | | | | | | | | | | | and a tag's words log as the session's /tagexec runs a word as a click in the workspace tag, as col/<serial>/exec does in a column's. A column's exec was write-only; it and /tagexec now read back the serials the last write touched, as /exec does. A click in a tag no longer goes to the focused pane's event reader, and what a word run from a column's ctl or exec or /tagexec says is logged msg -, not against the focused pane. The README, fs.md and the skill say so, and document the answer record. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look's miss repeats the path whole, up to 256 bytesGabriel Schneider33 hours
| | | | | | | | | The miss message clipped what was looked at to 48 bytes, mid-word, and a path past 160 bytes turned the has-no-line message into a bare no match. Both now carry up to 256 bytes, cut on a character boundary with an ellipsis past that. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An error on a column's ctl, exec or rmdir names that file in the logGabriel Schneider33 hours
| | | | | | | | noteError named every column node col/<serial>/tag, so a refused ctl write or rmdir pointed at the tag. It now names col/<serial>/ctl, /exec, /tag or the directory itself. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look at file:/re/ on an open pane goes on from its dot, and a miss leaves itGabriel Schneider33 hours
| | | | | | | | | Look's clean start cleared the active pane's selection before the address read the dot, so the root look's file:/re/ always found the same match, a miss collapsed the dot to a caret, and dumps kept the collapsed dot. A pane already open on the path is now addressed where it stands. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Edit's refusals name the pattern, not the line, and say when dot is emptyGabriel Schneider33 hours
| | | | | | | | | | | A ctl Edit that missed answered `Edit: no match for regexp "Edit /nomatch/d"`, quoting the whole program; it now names the address that missed (`no match for regexp /nomatch/`) and quotes no line after. An s on an empty dot says `no substitution: dot is empty`. A \\1 is blamed only once its pattern has matched, as before. tags.md says & is special in s and not in c, a or i, as in sam. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A column has a ctl, an exec and an rmdir over 9P, and Restore maps its serialGabriel Schneider33 hours
| | | | | | | | | | | | | | A script could read and write a column's tag but not act on the column. col/<serial>/ctl takes Delcol, Joincol, New and Tty, each acting on that column as from its tag; col/<serial>/exec runs a word as a middle click in the tag; rmdir col/<serial> closes an empty column and refuses one with panes (ENOTEMPTY, an err record saying why). The root ctl's refusal of Delcol and Joincol points at col/<serial>/ctl. A dump keeps each column's serial and Restore logs restoredcol <old> <new>; the dump golden gains them. Documented: Joincol's survivor, the column on the right, keeps its serial and tag. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A terminal's body reads as logical lines, the last one ending in a newlineGabriel Schneider33 hours
| | | | | | | | | | A terminal's body came back as the screen's rows, a long line cut where the terminal wrapped it and the last line with no newline. The body (and a terminal's Save, and the length its ctl reports) now joins wrapped rows by ghostty's wrap flags, as pty/run's output does, and ends the last line with a newline. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A focus write makes its pane's column the active one, and layout's active is itGabriel Schneider33 hours
| | | | | | | | | | | Writing a serial to /focus gave that pane the keyboard but left the active column where it was, so pane/new under Placement acme went elsewhere, and /layout's active named the keyboard's column rather than where a new pane would go. A focus write now sets the active column as the user's click there would, under either Placement, and /layout's active names the active column, which pane/new and a look place into. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A desktop session holds 64 panes, and every route that finds none free says soGabriel Schneider33 hours
| | | | | | | | | | | | | Sixteen panes was far too few for a real session. MAX_PANES is now 64 on a desktop and stays 16 on the board; the 48 more slots cost about 3.7 KB each in fixed tables (the core 1.33 to 1.45 MB, its surface 19 to 72 KB), and a pane itself (84 KB and its terminal) is allocated only when it opens. At the cap, pane/new fails with `pane/new: no pane slots: 64 max` and an err record rather than a bare ENFILE, a 9P look or exec that would open a pane fails its write with the same words and reads back empty, and New, Tty, Tutor and Alt-n say it on the message row (their ctl writes fail with it). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Columns are named by stable serials over 9P, as panes areGabriel Schneider33 hours
| | | | | | | | | | | /col/<n> named a column by its index, which shifts when a column left of it closes: exactly what scripts trip on. A column is now /col/<serial>, its serial kept while it lives and never reused; /layout lines give serial and index (`<serial> <index> ...`), active names the serial, /index's last field is the column's serial, and the log says newcol and delcol with serials. Docs, the skill and the tree's README say so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The tree serves the layout: /layout, /tag and /col/<n>/tagGabriel Schneider33 hours
| | | | | | | | | | | | | A script could not see where the panes sit or edit the tags a person clicks in. /layout lists each column, its index, x and width in cells, current or not, empty or full, and its panes' serials, then the active column; /tag is the workspace tag and /col/<n>/tag a column's, read and written as a pane tag is (one line: a newline written in is a space, and a truncating write drops the one ending it); /index's lines end with the pane's column; the log says newcol <n> and delcol <n>. acme serves no column files, and the docs say so. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A dump keeps the settings changed from a fresh session's, and Restore sets themGabriel Schneider33 hours
| | | | | | | | | | | A session running with Placement pardes came back from Restore as acme: a dump kept the layout and the theme but no setting. It now keeps every setting line that differs from a fresh session's, as the root ctl reads it, and a Restore applies them; the theme stays where it was kept, the font the frontend's, and REPL bindings are still dropped. The dump golden gains the three the snapshot harness sets. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A GUI-only setting says so on a terminal, and DumpDir reads back its directoryGabriel Schneider33 hours
| | | | | | | | | | `Lift on` over ctl on a terminal answered "unknown control message" while Config listed Lift as unsupported, and the ctl's DumpDir line read bare while Config showed the path in effect. A setting word this frontend lacks is now refused as `Lift is GUI-only` (GripWidth too), and DumpDir reads back the directory in effect, as Config does. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A write to a closed pane's file says it is gone, and a terminal says why it ↵Gabriel Schneider33 hours
| | | | | | | | | | | | | | takes no name `echo Del > pane/6/exec` just after pane 6 closed failed EACCES: the shell's lookup failed, it tried to create the file, and the engine refused every Tcreate as a permission error. pardes now takes Tcreate itself: refused as before (acme's fsyscreate refuses it too), ENOENT in a pane that has closed. Renaming a terminal was refused with only EPERM; it now says a terminal is named by its shell's directory, worded so a mount still maps it to EPERM. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A truncating write to tag drops the one newline that ends itGabriel Schneider33 hours
| | | | | | | | | `echo X > tag` stored X and a trailing newline, which drew an empty tag row. After a truncation the newline ending each write is held back until more text follows or the open is released, so the one ending the whole of it is dropped and any other stays; `>>` keeps what it is given. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A failed Dump or a Restore of no dump fails its write, before any warningGabriel Schneider33 hours
| | | | | | | | | | | | A Dump into a DumpDir it could not write, or a Restore of a file that is not a dump, answered a ctl write with rc 0 and only a message, and the Restore warned about unsaved panes before it ever looked at the file. The hosts' dump write now fails the waiting 9P write with EIO (the late failure a Save uses), naming the path and the reason in the log, and Restore parses the file before its unsaved-panes refusal, failing with `not a pardes dump`. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A choice setting's refusal names what it takes, and /commands lists themGabriel Schneider33 hours
| | | | | | | | | | | | Bare Placement and BootShell flip, which is pardes's convention for a word that chooses (Crt does too), but nothing said so, and "bad value in control message" never said what would do. A refused value now says `takes acme, pardes` (every switch and choice setting), /commands lists each such setting's values in a fourth field, and config.md and fs.md say that bare steps to the next. Motion and ShaderAnimation stepped nowhere bare and now step like the rest. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An answer the question does not offer is refused, and the question standsGabriel Schneider33 hours
| | | | | | | | | `answer z` to a question offering a and b succeeded, sent nothing and dropped the question; so did Del's `answer x`. The ctl now takes only an offered choice or -, refuses anything else with the choices it takes (`answer takes k j or -`), and leaves the question asked. Co-Authored-By: Claude Opus 5.5 <[email protected]>
*-. Merge: 9P round 6 + empty columns + render (acme theme, grips, Lift, Motion)Gabriel Schneider33 hours
|\ \
| | * Motion flavours differ by design, and drive notice drops and pane movesGabriel Schneider33 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The flavours looked alike because Lift, the only motion that read them, moves a shadow a few pixels: overshoot and wind-up were sub-pixel. By design now: crisp leaves at full speed and never passes its mark; smooth (the default) eases in and out in twice crisp's time, a slide arriving in 208 ms (inside §8.1's 220); bouncy passes its mark by ~30% and settles twice; playful winds up, passes by ~40%, and stretches and squashes, text included (the user's choice). Small motions are exaggerated by the flavour's gain. Motion gains launch, gain, span and norm, and ease(u)/speed(u) for moves of fixed length. The notice drop follows ease() over its fall (alpha never behind its position) and stays inside its pane's body past its row. Panel tracks carry the flavour in Track.motion (the old padding byte; macOS header name follows); opening and moving slides, zooms and rises follow it over span x their frames; landed, a pane is exactly its target; closing keeps its own exit. A pane past its mark never takes a neighbour's click; a rising one stays in its box. Tests: each flavour's lift trajectory distinct; flavour character; exact landing bit for bit; a stretched pane's drawn cells map back; the overshoot hit rule; the vertical clip at peak; legacy tests pinned to crisp. GUI golden 18-mid-transition changes (the retuned smooth slide at frame 6). Shared files: src/animation.zig, src/Presentation.zig, src/Messages.zig, src/macos.zig, src/config.zig, src/pardes.zig tests, src/ninep/screen.zig test, docs/effects.md, docs/config.md.
| | * acme looks like acme; every theme gets acme's button, scroll column and 2px ↵Gabriel Schneider33 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rules acme takes plan9port's own colours (acme.c iconinit, draw.h): selections #eeee9e in the body and #9eeeee in the tag, black ink; exec and look sweeps #aa0000 and #006600, white ink; a #99994c scrollbar under a #ffffea thumb; black rules; a #8888cc tag/body rule and column button. Every theme: the grip is acme's button, its tag row's full height, in one scroll column with the scrollbar (rail_px, 12 at a 17px tagline, scaled, times GripWidth, a percent, default 150; same x0/x1 to the pixel): focused clean = solid box; focused dirty = box_dirty filled to a box ring (acme's modbutton); unfocused clean = a box_border ring round the tag's ground; unfocused dirty = box_dirty a pixel inside that ring. The grid, which has no ring, marks dirty with a bold * on box_dirty in the grip's second cell and fills an unfocused grip halfway to its ring. Regions carry a dirty flag. Column buttons are the same shape, solid. 2px rules between columns and stacked panes (inside the tag band's slack), none at the window edge; a 1px tag/body rule halfway between tag and page. Theme data: tag_sel_bg, sweep_bg/fg, tag_rule, rule_px, rail_px, box_border, box_dirty. Chrome: rule_px, tag_rule, rail_px, grip_border, grip_focus_ring; a comptime guard on Chrome's layout forces a wire bump once v8 ships. Structural rules are exempt from the focus-indicator rule (docs/effects.md). Tests: acme widths; stacked rule in the slack at two tagline sizes; every grip-column pixel is band, button, ring or rule, and the button shares the scrollbar's x0/x1 (4 metrics x top/bottom x focus x dirty); the four grip states distinct in every native theme with a non-colour dirty cue in the grid; wire round-trip of the new fields. Shared files: src/colors.zig, src/surface.zig, src/body_layer.zig, src/tagline.zig, src/detached/wire.zig, docs/themes.md, docs/config.md, docs/effects.md, 21 snapshot goldens (the grip cells only), test/gui-goldens.txt. Motion flavours differ by design, and drive notice drops and pane moves
| | * Motion flavours, and Lift is shadow, rim or auto: auto on a dark page ↵Gabriel Schneider33 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | recedes the other panes (InactiveDim) Motion off|crisp|smooth|bouncy|playful is one parameter set (animation.Motion) every fx animation reads. One focus spring per pane drives both the lift and the dim, at the flavour's pace; a grid snaps. Lift drops glow and surface. A shadow falls on pane bodies and rails only, capped so text and the selection keep min(contrast, 4.5); rim is a hairline along the focused tag's top. auto is a shadow on a light page; on a dark page the core recedes the unfocused panes' text (InactiveDim, ported from 2e4d97f, default 30 under auto) with the same floor. Tests: focused text contrast is never below unfocused in any style, dim or theme; the focused pane's cells and tag are untouched by a dim. Shared files: src/config.zig, src/builtins.zig, src/ninep/ctl.zig, src/surface.zig, src/detached/wire.zig, docs/config.md, test/snapshots/builtins.snap (one more wheel for the longer help).
| | * Lift takes a style: shadow, surface, rim, glow or autoGabriel Schneider33 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The user wants Lift to read on dark themes, where a shadow has nothing to darken. `Lift shadow|surface|rim|glow|auto` (`on` is auto, bare flips auto and off): surface lightens the lifted part's ground about 5.5% (Material-dark), rim is a thin soft light off its top and left edges, glow a faint halo in the theme's accent (Chrome.accent, the focused box colour), auto a shadow on a light page and surface with half a rim on a dark one (by the page's luminance). Rim and glow are the soft kernel in a light colour (no pre-warp: coloured light is laid on as is, within §8.2's budget); each style is capped per theme so text keeps min(its contrast, 4.5) (tests: darkening and lightening over the native themes). The style travels in the palette (Chrome.lift_style, one byte on the wire). Config reports and ctl reads `Lift <style>`. Shared files touched: config.zig, builtins.zig, ninep/ctl.zig, detached/wire.zig (palette byte), gui.zig. Not touched: pardes.zig, Messages.zig, mouse.zig.
generated by cgit v1.3 (git 2.53.0) at 2026-10-02 12:11:24 +0000