| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Esc stops recentring
## A terminal row's ANSI colours survive being edited
The loudest colour bug this editor had: one keystroke anywhere in a coloured shell row turned EVERY
column of it grey. `EditAnchors` anchored a buffer line only when it was BYTE-IDENTICAL to the shell
row it stood over, so a single differing byte dropped the whole row's colour projection. Worst shape
is invisible: append past the pane's right edge, where the text is clipped, and the row looks the
same and only its colour goes.
Anchoring is byte-level now. An edit leaves the row's own bytes at both ends, and being the same
bytes they keep the same colours; only what was typed has no cell under it, so only that takes none.
Live, on real `fastfetch`: a 32-column blue run split into 6 + 26 around one typed character.
Three defects underneath it, all found by machinery rather than by reading:
* A JOIN removes a buffer line while the buffer's covered span grows, so `lines == covered` and both
aligned guesses — Nth line over the Nth covered row, and the same counted from the bottom —
resolved to the SAME wrong row. Every untouched row below a join went plain. Anchoring is now a
streaming monotone matching: one shell-row cursor that only ever moves forward, advanced once per
buffer line, linear in the buffer where the version before it was quadratic.
* An EMPTY line is not evidence. Splitting a row makes one, it equals every blank row in the span,
and left free to look ahead it claimed the blank row below the last output and took every coloured
row in between out of reach of the lines that owned them.
* Reflow under a scrolled viewport. `PageList.getTopLeft(.viewport)` returns the viewport pin
verbatim, x and all, while `PageList.pin` forces x to 0 — so after a reflow remapped a tracked pin
into the middle of a row, the text pass dumped row 0 from that column while the colour pass paired
the fragment with the row's FIRST cells. Row 0 wore its left half's colours until the pane snapped
back to live output. `bodyText` dumps from column zero now, which is also what ghostty's own
renderer draws.
Also here: DECSCNM (reverse video) was silently dropped whenever `tty_filter` was off, because the
raw path resolved a `.none` colour by role and never consulted the mode.
The test that found the first two is the one worth keeping: random editing against an ABSOLUTE
oracle — every row's own text names the colour it must have — because the differential oracle it
replaced was blind by construction. It skipped the edited row, which is the row the user is
complaining about.
## Esc returns to a pane without moving its view
Esc in body normal mode runs `Last`, "the pane you were in before this one", and that went through
`focusPaneLine`, which recentred a file on the target line unconditionally. So returning to a buffer
repainted the whole screen to show a line that was already on it.
`focusPaneLine` takes a landing now: `.center` for the three callers going somewhere you have not
been (a look target, a path a pane already holds, `@pN:LINE:COL`), `.keep` for Esc. `.keep` leaves
the view alone and lets `ensureCursorVisible` — which already existed and already scrolls by the
minimum into the `scroll_off` band — be the only thing that may move anything.
Not `line = 0`, which `focusPaneLine` already understands as "focus and touch nothing": a background
pane's view can move while you are away, because the wheel scrolls the pane under the POINTER and a
resize reveals no cursor, so the recorded cursor plus a minimal nudge is what actually gets you back.
Ctrl-o and Ctrl-i keep centring, and the asymmetry is structural rather than arbitrary: `Last` only
ever CROSSES panes, so the pane it lands on already holds the view you left it with, while `jumpBy`
can land in the SAME pane, where a long in-file jump would arrive on the very top or bottom row with
`scroll_off` lines of context on one side. Helix splits the same pair the same way — its jumplist
centres, its buffer switch does not.
One deliberate consequence: under `.keep` a PDF's page is not restored AT ALL, because a page reveal
IS that pane's view and a reveal of the page you are already on still snaps `document_scroll_y` to
that page's start, discarding where you had read to. When something moved the pane while you were
away — the wheel again — Esc leaves it where the wheel left it, and Ctrl-o is how you reach the
recorded page.
## host_io.zig: the machine-local half of a host, once
`host.zig` is the seam. The part of the answer that is identical on every host with an operating
system under it — fork a pane's shell, put bytes on a disk — was written FOUR times: in tty.zig,
gui.zig, macos.zig and detached/server.zig. What those copies had in common says what they were for:
all four were missing FD_CLOEXEC on the pty master, so in every shell pardes has shipped, a program
in one pane could read another pane's terminal.
One copy now, and the wire got smaller for it: `ServerMsg.spawn` is gone. A frontend never asked the
server to fork anything — the server has an operating system under it and forks through `host_io`
like every other host — and `decodeClient` lost the scratch buffer that message needed.
|
| |
|
|
| |
stops rewriting the suite
|
| | |
|
| |
|
|
| |
takes a path argument
|
| |
|
|
| |
walk wrapped rows
|
| |
|
|
| |
optional methods
|
| |
|
|
| |
backends agree
|
| | |
|
| | |
|
| |
|
|
| |
docs
|
| |
|
|
| |
additions, unit tests
|
| |
|
|
| |
over grid cells
|
| |
|
|
| |
+ snapshot refresh
|
| |
|
|
| |
snapshots
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
glslc is the one build input that wants a tool a stock machine does not have,
and it is also the input that changes least often: eight GLSL files that have
outlived several rewrites of everything around them. Asking every machine that
wants to run the SDL shell for shaderc is the wrong trade.
The SPIR-V is now COMMITTED, under shaders/prebuilt/, and -Dprebuilt-shaders
embeds that copy instead of shelling out. The default stays the honest one --
compile the shaders that are actually in the tree -- because the flag trades a
dependency for a freshness problem: with it on, the .glsl sources are not build
inputs at all, so editing one changes nothing.
`zig build shaders` is the other half, and it is deliberately independent of
-Dplatform: it recompiles every shader and writes the result back into the
tracked directory, so whoever changes a shader refreshes the cache on a machine
that has the compiler and commits the diff. `jj diff shaders/prebuilt` after it
is the freshness check -- empty means the cache was already current.
The shader list is also spelled once now (gui_shaders): the eight embeds, the
eight glslc runs and the refresh step all read it, so adding a shader is a name
there plus the @embedFile in gui.zig, not three edits in two places.
Verified: -Dplatform=gui -Dprebuilt-shaders builds with glslc absent from PATH,
and image-harness passes on that binary -- real SDL GPU pipelines built from the
committed SPIR-V, 512 source pixels read back. The default gui build still runs
the eight glslc steps; tty runs none. The committed bytes are identical to a
fresh glslc run, and `zig build shaders` is idempotent.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Three changes that all turned out to be the same shape -- a feature that
worked in one direction, or for one pane kind, and quietly did not in the
others.
CLIPBOARD. Every register write emitted set_clipboard, so deleting one
character threw away whatever the desktop was holding; multi-cursor yank took
the join's early return and emitted nothing at all, so the same key reached
the clipboard on one cursor and not on two. Nothing could READ the clipboard:
the SDL shell had no SDL_GetClipboardText anywhere in it, and the tty shell
never asked for OSC 52, so `p` from another application was dead in both.
Now it is helix's split. y/d/c/p/P/R and the acme chords are the DEFAULT
REGISTER and nothing else; the system clipboard is five words on helix's own
letters -- SPC y, SPC Y, SPC p, SPC P, SPC R -- spelled as builtins so they
land in Help and are executable like every other verb. The one exception is
the tag `y` chord, which still mirrors out because a tag is always insert, so
SPC cannot be pressed there, and copying the path out is the whole point of
the chord.
Reading is a new read_clipboard effect answered by an ordinary Event.paste, so
the round trip is honest about being one: SDL and NSPasteboard answer inside
the same drain, the browser answers a promise, and a terminal answers over
OSC 52 or -- far more often -- refuses. A refused read is a paste that does
not happen, and the request dies at the next keystroke rather than landing
minutes late in whatever pane is focused by then.
The tty shell also enables BRACKETED PASTE now and coalesces
paste_start..paste_end into one event. Before this a paste arrived as a flood
of individual key presses: plausible in insert mode, and in normal mode every
pasted character ran as a command.
n/N. They stepped the armed results buffer and immediately Looked each row, so
you could not walk past a hit without opening it. They are a MOTION now:
select the next look-able text, open nothing, and let Enter decide. What they
step is the largest whitespace-delimited run look.resolve can act on
(look.lookableSpan, wrapper punctuation peeled), over a RING of panes -- every
pane that has performed a look, most recent first, then the output buffers
that have not, newest first, and only if both are empty the pane in front of
you. N is the exact inverse of n, computed rather than remembered: both
directions ask the same question about the same spans and compare against the
column the walk parks on, so x presses one way and x back land exactly where
you started, pane boundaries and the ring's seam included.
A ring rather than a list with two ends because a shell's cursor sits at the
prompt, below everything it has printed, so a walk that could not come round
would have nowhere to go on the very first press -- which is the case n/N were
written for.
One motion everywhere, no pane-kind or buffer-kind special case. The only
thing a buffer may change is the GRAIN of what a step selects, and it does it
with one flag rather than a branch: output_pane.Traits.commands (renamed from
`executes`, which named one reader's behaviour rather than the fact) makes a
row select WHOLE, because a ThemeSel line is a word to run and has no path
inside it to pick out. `]d`/`[d` are not n/N -- they are helix's diagnostic
motions, their job is to ARRIVE, and they still reach searchStep.
THE TTY PROMPT. Leaving raw tty blanked the prompt row, and the command you
had typed at that prompt shares the row, so it went too -- a shell out of tty
read as output only. OSC 133 marks the row CELL by cell, so the two are
separable: config.tty_blank = .prompt cuts the prompt's own columns and leaves
the command, left-hugged at column 0 in line with the output under it rather
than in a bay of blanks. .prompt_and_input is the old behaviour, kept.
Because the row is now something you can put a cursor in, enterTty adds the
hidden prompt width back before asking ghostty to walk the shell's own cursor
to it -- the modal column on a cut row is short by exactly that much.
Verified: unit-test 186/186 (nine new), snap 87/87 (new ttyprompt.snap),
hxdiff 481 and hxparity 561 with 0 mismatches, tty and gui both build. And
against the real binaries rather than the harness: in a pty, SPC y emits OSC
52 carrying exactly the selection while plain y emits nothing, SPC p issues
the read and pastes the reply, and a bracketed paste of "dd..." inserts text
instead of deleting two lines. In a real SDL window, SPC y then SPC p round
trips through the system clipboard while the default register holds different
text. Setting tty_blank back to .prompt_and_input reproduces all 86 old
goldens byte for byte.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The AppKit shell now draws what the core renders, follows the theme without a
relaunch, and builds into something you can hand to someone.
- Pixel attachments. Surface.images was dropped on the floor here, so a PDF
pane showed nothing at all: native_images is now set, pardes_image_s carries
the geometry the core already clipped, and PardesView keeps one CGImage per
(serial, page, revision) so scrolling costs a draw and not a decode. Image
panes get real pixels instead of the petscii fallback.
- Themes take hold live. pardes_tick never advanced the chrome animation, so
every tagline kept the previous theme's colours until the next launch and
the 16 ms re-pump spun for the rest of the session. pardes_theme_bg retires
the hand-agreed #121212 and drives the window background and the titlebar
appearance; a theme with no background of its own now gets a transparent
window over an NSVisualEffectView.
- The cell snaps to whole DEVICE pixels rather than whole points. Monaco
advances 8.4014pt at 14, so ceiling to 9 spaced every column 7.1% wider than
the face was drawn for.
- The dial is one notch per 10 degrees instead of 20, and a release keeps
turning in proportion to how hard it was thrown -- ramping up from zero at
the floor, so a slow twist coasts not a little but not at all.
- A file dropped on the grid is a click plus Look, so it opens beside the pane
it was dropped on. No drop concept was added to the core.
- The titlebar follows the focused pane: proxy icon, filename, and the dirty
dot. File.saved_revision is the watermark that last one needed.
- Config (SPC f c) prints the resolved startup config path.
- build.zig assembles, signs and packages the bundle itself; build-app.sh is
gone. -Dmacos-identity= takes a Developer ID, macos-dmg makes the image, and
the icon is Glenda.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Esc ran Toggleterm, which hopped between the newest DOC and the newest
TERMINAL. That distinction never earned its keep. It made Esc unpredictable —
which of three panes you landed on depended on their kinds, not on where you
had been — and it could not alternate between two files at all, which is the
case you hit most. Editing two files, Esc did nothing.
The replacement already existed. Last (SPC j j) is "the pane you were in
before this one, whichever it was": it walks the jump stack for the newest
entry naming a different pane and restores its line and column. So Esc, and
Shift-Esc in tty, now run Last, and Toggleterm is deleted rather than renamed
— a third implementation of "go to the other pane" was the thing to avoid.
SPC w t goes with it; the w group is the four directional moves, and the jump
group already had SPC j j.
Held down, Esc alternates. Two files, a file and its shell, a file and a
+Search — all the same, because Last has no notion of kind to get wrong.
This depends on the swap in the same series: Last reads the stack backwards,
and until hopping stopped appending, the pane you came from could fall off it.
windownav.snap needed only its keys and prose changed — its golden did not
move at all, which is the useful evidence here: for the one scenario the old
builtin handled well, Last produces an identical focus sequence.
Coverage for what it did not handle is new: a unit test opens a second FILE by
looking its name and asserts Esc alternates between two panes of the SAME
kind, which is the case that used to be a no-op.
Docs follow: tutor.txt, docs/helix-keys.md, docs/design.typ, and the builtin
index goldens, which are now one row shorter.
75/75 snapshots, both unit suites, and the macOS ABI build all pass.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
search/range look steps, goldens updated
|
| |
|
|
|
|
|
|
|
|
| |
config.tag_normal became a space when the mode moved into the layout box,
and 66 goldens still spelled the old bullet — the whole suite was red on
one character. Regenerated serially, and every file's diff is that
character and nothing else: replacing the bullets in the OLD goldens with
spaces is byte-identical to the new ones, so nothing else moved under
cover of the churn. The one bullet left in tutor.golden is the tutor's own
sentence about the badge, which the app still draws.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
file:LINE:COL-ENDLINE:ENDCOL, with the two short forms people actually type
reading naturally: file:412:9-21 on one line, file:412-418 whole ones. Ends are
inclusive. A path feature, not a search feature — a ranged path typed in a tag
or middle-clicked out of a shell's output selects just the same; search is only
its first consumer.
The dash is the fussy part. `-` was already a file char, so a ranged word
survives click expansion whole, but a range needs a number on BOTH sides or
my-file:10, build-2 and 2026-07-30 would stop being paths. Table-driven test in
look.zig for exactly that.
Selecting goes through the cellRange/setPaneRange pair the multi-cursor work
left, and hxOff clamps both ends, so a stale range selects what still exists
rather than crashing or reaching past EOF — pinned with an 8:6-400:9 range in a
nine-line file.
Producers: / search, Grep, and five LSP sites through a new spanRow — goto,
references, rename tokens and both symbol lists were throwing away real
protocol ranges at path:line:col. Left alone deliberately: Find rows are bare
paths with nothing to span, a jump is a spot not a span, and the diagnostic and
format paths only ever have a point, where half a range would be worse than
none.
One knock-on worth knowing: n now leaves an EXPLICIT selection, so a topbar
execute chords it. grep.snap's no-match step was silently becoming
`Grep TARGET`; it runs from the leader path now, which never chords, and the
dedicated chord steps stayed where they were.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It never did — the effect arm was `.watch => {}` with a comment saying a shell
that never delivers the event simply never reloads. That was written as a
deliberate scope cut and it is the whole bug: the user runs pardes-gui.
The tty watcher was fine, and I proved all four suspicions false against a real
binary in a real pty with the write done by a stranger process and NO input
delivered afterwards: the loop does wake (postEvent signals an empty queue),
zig fmt's rename-over does fire MOVED_TO and is caught, three panes across two
directories all reload and closing one leaves its neighbour still following,
and the self-write hash guard does not swallow a real change. The live session
even had its inotify mark on src with the right mask and re-read config.zig
when I touched that directory.
Duplicated rather than shared with tty.zig, the way the two shells already each
own LspJob, forkShell and their pty readers. The headless PARDES_TEST_GRID path
deliberately passes -1: its contract is one frame per scripted input, and a
reload on its own clock would put an unasked-for frame in the stream.
filewatch.snap proved less than it looked. Its real blind spots were the
rename-over shape — the old script only truncated, so it saw CLOSE_WRITE and
never MOVED_TO — multiple directories, and the one that mattered: the suite
only ever runs the TTY binary, so it structurally cannot see a gui-only
regression. It now uses a new `run` directive whose writer is a child of the
RUNNER, so nothing it does reaches an app pty.
|
