From cfd2b993feda1b3f7474225bb32db8cac8edc5ae Mon Sep 17 00:00:00 2001 From: Gabriel Schneider Date: Thu, 5 Nov 2026 11:21:15 -0300 Subject: targets: the ESP32-P4 board port goes (src/esp32p4*.zig and src/esp32p4/, -Dplatform=esp32p4 with its pinned riscv32 target, -Desp32p4-cols and -rows, the Peek, Poke, Hexdump and Gpio words and the Board behind them, the board's 9P engine options, the gpio_toggle host slot), and with it every guard and limit only the board needed: terminal_panes and terminal.enabled (ghostty is in every build), memory.limits' board branching (the desktop values stay), MAX_PANES 64 and MAX_COLS 16 fixed, the board's boot buffer and its embedded boot, the pager's and the terminal's emulator-less paths; tests: the board's GPIO, ring and Board ones go, the boot-OOM and transition-grid ones stay under their own names; the perf harness loses the board's fixture, so the Debug baselines of both frontends are recorded again (--only medium --reps 10) Co-Authored-By: Claude Opus 5.5 Claude-Session: https://claude.ai/code/session_016Y9MNAtZenFv4weoMD3cge --- src/esp32p4_9p.zig | 186 ----------------------------------------------------- 1 file changed, 186 deletions(-) delete mode 100644 src/esp32p4_9p.zig (limited to 'src/esp32p4_9p.zig') diff --git a/src/esp32p4_9p.zig b/src/esp32p4_9p.zig deleted file mode 100644 index 5fcab85b..00000000 --- a/src/esp32p4_9p.zig +++ /dev/null @@ -1,186 +0,0 @@ -//! Standalone GPIO 9P firmware over UART0; the editor is not linked. -//! UART0 carries protocol bytes only, including fatal diagnostics. -const std = @import("std"); -const soc = @import("soc"); -const hal = @import("hal"); -const config = @import("config"); -const ninep = @import("9p.zig"); -const gpio = @import("esp32p4_gpio.zig"); -const uart = @import("esp32p4/uart.zig"); - -const Pads = struct { - pub fn level(pin: u8) u1 { - return hal.gpio.getDrivenLevel(pin); - } - - pub fn drive(pin: u8, want: u1) void { - hal.gpio.configureOutput(pin, .{ .readback = true }); - if (want == 1) hal.gpio.setHigh(pin) else hal.gpio.setLow(pin); - } -}; - -comptime { - for (gpio.Header.gpio_pins) |pin| { - if (pin > hal.gpio.max_pin) @compileError("JP1 names a pad this chip package does not have"); - } -} - -const Fs = gpio.Fs(Pads); -const Server = ninep.Server(Fs, ninep.board); - -comptime { - std.debug.assert(@typeInfo(@FieldType(Server, "fids")).array.len == 32); - std.debug.assert(@sizeOf(Server) <= 10 * 1024); -} - -const msize: u32 = 1024; - -var in_buf: [msize]u8 = undefined; - -var out_buf: [2 * msize]u8 = undefined; - -var stage: [128]u8 = undefined; - -const baud: u32 = 921600; - -var srv: Server = undefined; -var fsys: Fs = .{}; - -export fn zig_main() noreturn { - soc.flushFlashCache(); - - if (config.cpu_mhz != 90) hal.clkrst.setCpuFreq(switch (config.cpu_mhz) { - 180 => .mhz180, - 360 => .mhz360, - else => .mhz90, - }); - - _ = hal.rwdt.disable(); - - _ = uart.drainInput(); - - _ = uart.setBaud(baud); - - srv = Server.init(.{ .in = &in_buf, .out = &out_buf, .root = gpio.root }); - - var stage_len: usize = 0; - while (true) { - if (stage_len < stage.len) stage_len += uart.read(stage[stage_len..]); - if (stage_len != 0) { - const took = srv.push(stage[0..stage_len]); - if (took != stage_len) std.mem.copyForwards(u8, stage[0 .. stage_len - took], stage[took..stage_len]); - stage_len -= took; - } - - while (srv.retry()) |req| { - const a = fsys.handle(req); - srv.reply(&a.reply, a.bytes); - } - while (srv.next()) |req| { - const a = fsys.handle(req); - srv.reply(&a.reply, a.bytes); - } - - const queued = srv.output(); - if (queued.len != 0) srv.wrote(uart.writeSome(queued)); - - if (srv.protocol.dead) { - srv.hangup(); - while (srv.next()) |req| { - const a = fsys.handle(req); - srv.reply(&a.reply, a.bytes); - } - _ = uart.drainInput(); - stage_len = 0; - srv = Server.init(.{ .in = &in_buf, .out = &out_buf, .root = gpio.root }); - } - } -} - -fn die(msg: []const u8) noreturn { - var buf: [ninep.errmax + ninep.header_len + 2]u8 = undefined; - const bytes = ninep.encode( - .{ .rerror = .{ .ename = msg[0..@min(msg.len, ninep.errmax)] } }, - ninep.notag, - &buf, - // unreachable: the message is cut to errmax and buf is sized to it - ) catch unreachable; - uart.write(bytes); - while (true) {} -} - -fn hex8(buf: *[8]u8, v: u32) void { - var shift: u5 = 28; - for (buf) |*slot| { - const nib: u8 = @intCast((v >> shift) & 0xf); - slot.* = if (nib < 10) '0' + nib else 'a' + (nib - 10); - shift -%= 4; - } -} - -export fn trapEntry() linksection(".text.entry") callconv(.naked) noreturn { - asm volatile ("j trapReport"); -} - -export fn trapReport() noreturn { - const mcause = asm volatile ("csrr %[o], mcause" - : [o] "=r" (-> u32), - ); - const mepc = asm volatile ("csrr %[o], mepc" - : [o] "=r" (-> u32), - ); - const mtval = asm volatile ("csrr %[o], mtval" - : [o] "=r" (-> u32), - ); - var msg = "trap mcause=00000000 mepc=00000000 mtval=00000000".*; - hex8(msg[12..20], mcause); - hex8(msg[26..34], mepc); - hex8(msg[41..49], mtval); - die(&msg); -} - -pub const std_options: std.Options = .{ - .page_size_min = 4096, - .page_size_max = 4096, - .logFn = logFn, -}; - -fn logFn( - comptime _: std.log.Level, - comptime _: @EnumLiteral(), - comptime _: []const u8, - _: anytype, -) void {} - -pub const panic = std.debug.FullPanic(panicImpl); - -fn panicImpl(msg: []const u8, first_trace_addr: ?usize) noreturn { - var buf: [ninep.errmax]u8 = undefined; - @memcpy(buf[0..7], "panic 0"); - buf[7] = 'x'; - hex8(buf[8..16], @truncate(first_trace_addr orelse 0)); - buf[16] = ' '; - const n = @min(msg.len, buf.len - 17); - @memcpy(buf[17..][0..n], msg[0..n]); - die(buf[0 .. 17 + n]); -} - -export fn _start() linksection(".text.entry") callconv(.naked) noreturn { - asm volatile ( - \\ li t0, 1 << 13 - \\ csrs mstatus, t0 - \\ la sp, __stack_top - \\ mv fp, sp - \\ la t0, trapEntry - \\ csrw mtvec, t0 - \\ la t0, __bss_start - \\ la t1, __bss_end - \\ bgeu t0, t1, 2f - \\1: - \\ sw zero, 0(t0) - \\ addi t0, t0, 4 - \\ bltu t0, t1, 1b - \\2: - \\ j zig_main - ); -} -- cgit v1.3