# RULE: there is ONE focus history and it is a stack of LOCATIONS — a pane and
# a spot in it. Ctrl-o walks it back, Ctrl-i walks it forward again, `SPC j j`
# (Last) hops to the newest OTHER pane, and `SPC j l` (Jumplist) writes the
# same stack out as an output buffer whose rows are ordinary look targets, so
# n/N step them. What gets ONTO the stack is decided in one place (trackJump):
# focus ended the update in a different pane, or more than a bodyful of rows
# away in the same one — which is why `100G` below leaves a location behind
# and the j/k that follow it do not.
#
# Focus and position both show in the golden's `cursor=` header: that is the
# ACTIVE pane's cursor, so each snap is named by where it should land.
lines big.txt 200
start 30 150 big.txt
wait 8000 big.txt
stable 700 20000
# a FILE boots alone now, so this is one column holding big.txt, focused, and
# the stack is one entry deep
snap start
# two focus moves. The shell has to be opened before it can be walked to, and
# SPC c n (Newcol) puts it in a column of its own on the right AND focuses it —
# so opening it IS the first of the two moves, and the stack below is the same
# one a shell at boot left. Walking straight back to the file does NOT leave
# `file -> shell -> file` behind: a hop to the entry under the top one is the
# same two places again, so trackJump swaps them rather than appending, and the
# stack is `shell -> file` with the file on top (see trackJump).
key space c n
stable 700 15000
snap to-shell
key space w h
stable 400 5000
snap to-file
# a FAR motion inside one pane: 100G is a jump, so the line we left is
# remembered and Ctrl-o can come back to it
text 100
key G
stable 400 5000
snap goto-100
# Ctrl-o: back to line 1 of the same pane — a stack of panes could not do this
key c-o
stable 400 5000
snap back-in-file
# ...and back again into the shell
key c-o
stable 400 5000
snap back-to-shell
# Ctrl-i forward, twice: back to line 1 of the file, then line 100 again. Sent as the
# kitty-protocol CSI u (`CSI 105;5u`) because on the wire Ctrl-i IS Tab —
# see config.jump_keys.
send \e[105;5u
stable 400 5000
snap forward-file
send \e[105;5u
stable 400 5000
snap forward-100
# SPC j j — the newest OTHER pane, and pressing it again comes straight back
key space j j
stable 400 5000
snap last
key space j j
stable 400 5000
snap last-back
# SPC j l — the stack as text: `location text` rows, the file naming itself
# and the shell spelled @pN because it has no path
key space j l
stable 700 15000
snap jumplist
# n/N step the rows and look them, exactly as they do a +Search: the stepped
# row is selected in the buffer (snapstyle) and the pane it names follows.
# Row 1 is the shell (no path, so `@pN`), row 2 the file at line 1, row 4 the
# file at line 100 — so the body visibly rides the list.
#
# ponytail: stepping onto an `@pN` row selects it but does NOT focus that pane —
# the cursor stays where it was, which is why step1-shell's header is still the
# file's. Only rows with a PATH move focus. Nothing tested this before, because
# until the swap above the shell never survived on the stack to be listed at
# all. Fix belongs in the location-list step, next to the path case.
key n
stable 700 15000
snap step1-shell
snapstyle step1-shell
key n
stable 700 15000
snap step2-file
key n
stable 700 15000
key n
stable 700 15000
snap step4-line100
key N
stable 700 15000
snap step-back
# and an ordinary LOOK on a row goes there too — the leading word IS a
# location, so the right-click look resolves it like any other path. Row 4
# again, this time by clicking it: the buffer's four rows are the last four
# screen rows, so row 4 is the bottom one.
press right 16 30
release right 16 30
stable 700 15000
snap look-row