| Commit message (Collapse) | Author | Age |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Voice.rate is the voice's playback speed and so its pitch: 2 is an octave
up and half as long, 0 holds it, and changing it does not restart the
voice. The mixer keeps a fractional cursor and resamples by linear
interpolation between a sample and the next (the last toward silence, or
the first when looping): the least code that sounds right, a little dull
far from 1; at rate 1 the samples come out exactly. An infinite or NaN
rate ends the voice instead of crashing the conversion.
Voice.group (0-7) puts a voice under a group's gain, which draw declares
each frame with f.gain(group, value) (Command.gain); a group not given
one plays at 1, so it is declared state and replays like the voices. The
mixer glides each group toward its gain by 1/480 a sample (10 ms for a
full swing), so a gain set in one step does not click. Music ducking
under speech is then the sketch lowering one number; nothing ducks by
itself. The web host ignores gains as it ignores voices.
Test: half and double speed against the interpolated samples, rate 0
holding, an infinite rate ending; a looping voice in group 1 at gain 0.5
gliding there and staying while group 0's is untouched, and going back to
1 when the gain is no longer declared. test-audio also builds the voices
sketch for the web, which compiles the web host's newSound and gain. The
README lists rate, group and f.gain with what they do.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
02-dont-rat-me-out's synth.zig, a pure and deterministic port of
DrPetter's sfxr, moves into the library as src/sketch/sfxr.zig, exposed as
sk.sfxr: render(params, rate, out) gives a coin, blip, laser or explosion
as samples for host.newSound. Its knobs count in samples at 44.1 kHz, so
the one change is the rate: every length (envelope, arpeggio, repeat,
phaser offset, period) grows by rate/44.1 kHz and every per-sample step
(slides, duty sweep, vibrato, filter coefficients and their ramps)
shrinks by it, to first order for the slides and filters; at 44.1 kHz
each factor is 1 and the samples are the original's to the bit. Two
spellings change without changing a sample: the phaser buffer is
@splat (Zig 0.17 has no ** on arrays) and the phaser delay is clamped
before it is converted, so a long sweep cannot overflow it.
Test: four parameter sets that between them turn every knob render the
lengths and Wyhash of the samples the original rendered at 44.1 kHz (run
once, outside the repo), and at 48 kHz a sound as long within 1 %.
test/voices.zig makes its blip with sfxr in draw, at in.sample_rate, and
is the README's example: a blip in six lines.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A sketch that synthesised a one-shot had to stream it (and keep a replay
from re-firing it by hand) or encode a WAV for decodeSound. host.newSound
(samples) copies mono samples at in.sample_rate into the host and gives an
Audio like a loaded one, so the one-shot is a voice: reconciled by key and
serial, mixed, faded and limited by the host. It is kept for the life of
the host like every sound, and .none if a sample is not finite. The
vtable entry is C callconv (pointer and length), as anything new in
abi.zig is, for a second host; the web host keeps the copy for samples()
(its voices are silent).
Tests: a unit test that the sound is a copy and that NaN and infinity are
refused; test/voices.zig makes a 1000-sample blip in setup and declares it
under a serial space bumps, and test/voices.script checks it sounds once,
stays silent through a recording of it played, stepped and seeked, and
sounds again for a new serial. For that, expect-audio KEY also passes
when voice KEY was mixed since it was last asked, and expect-no-audio KEY
says it was not. zig build test-audio runs the script too.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
above it
Every mixed sample went through x/(1 + |x|), so one voice at 0.5 played
at 0.33, bent. The mix now passes through untouched up to 0.75 (-2.5
dBFS) and above it follows knee + (1 - knee)·u/(1 + u), u the excess over
the room left (the old curve is its knee-0 case): same value and slope
at the knee, rising, tending to 1. A clip normalised to full scale only
has its peaks bent (1 plays at 0.875); two at full scale sum to 0.958.
Per sample, no state, no lookahead, on the frame thread as before.
A unit test checks the curve: identity to the bit below the knee (every
997th float, both signs), rising and at most 1 from the knee to infinity
(every float near the knee), odd, slope 1 at the knee; `zig build
test-audio` runs the mixer's tests alone. The README says what the mixer
does, and that SDL clips the total of the voice mix and the streams.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |\
| |
| |
| |
| |
| |
| | |
Recording (sessions, marks, clips, the reload speed-ups under them) and anim's Deck with its example talk, together; no conflicts; zig build test: 161/161 steps, 127/127 tests.
Co-Authored-By: Claude Fable 5.2 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| | |
| |
| |
| |
| |
| | |
An Event says its key (abi.Event.key), which the player and the talk example each spelled out by hand; `zig build talk` shows examples/talk.zig in a window on the generic host, its state under .zig-cache, and `zig build talk-lib --watch` beside it reloads every edit in place.
Co-Authored-By: Claude Fable 5.2 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
examples/talk.zig keeps an anim.Deck in its State beside its own data,
turns clicks and keys into asks and paints with an anim.Painter: two
slides, a mass that bobs (loop) while the deck waits, a damping slider laid
out and hit-tested in the talk (it takes its clicks), a choice gate that
branches on it, and slide 1 cleared beside slide 2's writing.
test/talk.script (zig build test-talk) steps it, finishes a step on a
click, goes back, jumps slides, drags the slider without advancing,
reloads mid-wait with the first step retimed (same step, t a second later)
and checks two exports with 2 s holds frame by frame. The vecanim live
scene's words follow the new pause.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
and the Deck
A talk is a live scene re-run from the top every frame, a function of its
time and of the gates opened so far. Frame.gate(open) waits while time runs
on and records the value it opened with; pause() is the presenter's click.
beside and loop are the sub-animations, slide() the second navigation
level, clear() the end of a slide. anim.Deck is the playhead and the gate
log as plain data for any sketch's State: update() takes an Ask (next,
back, next_slide, back_slide, to, end) and runs the talk with the app
mutable, shot() runs it read-only for drawing. A click during a step
finishes it; back cuts to the picture held before the last click; an edit
that moves the last opened gate moves t with it; exported, every gate
holds Deck.hold. Live takes a namespace or a tuple of them (sources) and
exposes frame. Builder.pause, Instant.clock and Frame.clock are gone: t
runs through gates. A test-anim step runs the module's tests and the
player's scenes.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
A scripted run from fresh state records in memory, and a very long one grew
without end. It stops at 256 MiB (ten hours or more of play at 60 Hz; a
write the memory database cannot make, out of memory included, is the
same): once, a warning, and no more frames, while what it holds still
reads (marks, clips, past sessions).
test-same plays test/past.script twice into two databases and compares them
value by value with test/same_sessions.zig, but for a session's started and
ended (the wall clock): every frame, keyframe, stretch and mark follows from
the script alone. A third run from fresh state leaves its state file and no
database.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
export-session [S] FILE writes session S (this run's by default, committed
first), with the marks and clips that point into it, as session 0 of a new
database: written beside FILE, synced, renamed over it. import FILE appends
each session of such a file to this database, from "import <file name>",
its marks and clips renamed NAME@<file name> (cut to 32 bytes). The copy is
value by value, the same few lines for both, over whatever a session holds;
sessions lists where one came from.
test-import records test/past.script's session, exports it, imports it into
another database and replays it there: the mark it carries is the State
half a second in exactly, and two seconds in is frame 120's.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
zig build run, probe and export pass --state .sketchbook/<name>.state. The
host makes that directory with a .gitignore of * (a sessions database
grows, and the jj snapshot build_info takes would commit it while under a
megabyte), and moves the state and store an older build kept beside it in
once, with renameat2(NOREPLACE): when both exist nothing moves and the
host says so. Without --state an interactive run keeps its files in
$XDG_DATA_HOME/<name>/ (~/.local/share without it), not the cwd; a script
or an export still uses sketch.state. test-paths checks all three cases.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
play session S [at SECONDS] restores the session's keyframe before that
time (a binary search over its keyframes' times), replays its frames up to
it and leaves it paused there; without a time it plays from the start. At
each later keyframe the replay reaches, the State is compared with it over
the leaves migration kept: a keyframe taken of what update made (periodic,
mark, before a reload, exit) that differs is reported once, "diverged
before frame F: N values, first <field>", and every keyframe is restored,
so a replay across a jump the log does not hold (set, load, a sketch
command) goes on from the State that followed it. A session built from
another source or build says so. The console's status line names the
session, frame and time, the mark, the clip and where it records.
test-past records a session, replays it by the same build (the mark's
State exactly, frame 120's two seconds in, no divergence), then by a build
with an edited fixture (one divergence, before the mark).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Live play was recorded only after someone typed record N, into 16 fixed
slots. Now every run is a session in one xitdb database per sketch, beside
its state file (<name>.xitdb): an append-only log of the frames live
update was fed, one commit a second of session time, and keyframes of the
State at start, every minute, on jumps, before and after reloads and at
exit. A kill -9 loses at most the uncommitted second (test-kill).
Whether a build records travels in the sketch: App.Options.record, null
meaning Debug, reaching the host as Info.record. Scripted runs from fresh
state record in memory, exports not at all. Each stretch of a session
keeps its build, layout and Info.source: the repository revision (one jj
or git call per build, build_info), zig version, backend and mode.
Sessions.zig takes plain data (bytes, events, strings, a path, an Io), so
a second host can drive it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |/
|
|
|
|
|
|
|
| |
The comptime walk over the shared types cost about half a second of every
sketch library's compile. abi_hash.zig runs it at build time, once per
change of the abi sources (watched like any input), and build.zig hands the
number to host and sketches as the module abi_hash; abi.hash folds in the
build as before. The value is the walk's own, computed for the build
machine in Debug.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
with objects a scene draws itself
The player takes its canvas from the room it has and fits the scene's
frame into it, plays through and quits when exported, and draws vector
objects in runs around custom ones. The renderers' resvg comparison and
the timings come along as `zig build diff` and `zig build bench`; the
comparison's reference is padded to whole blocks rather than squeezed,
which had put Typst text over the limit.
Co-Authored-By: Claude Fable 5.2 <[email protected]>
|
| |
|
|
|
|
| |
longer defragments (it lost a frame's first draws)
Co-Authored-By: Claude Fable 5.2 <[email protected]>
|
| |
|
|
|
|
| |
a font from the environment
Co-Authored-By: Claude Fable 5.2 <[email protected]>
|
| | |
|
| |
|
|
| |
spectrum, spectrogram), audio codecs and fonts, web host
|
| |
|
|
|
|
|
|
|
|
|
| |
- input.started: true on the first update of a run, never after a reload,
for a sketch to stop what should not resume from saved state.
- A console line that errors fails its script. Sketch commands answer
unknown, done or failed (abi.Outcome) instead of a bool that hid errors.
- addScript also takes the hot-reloadable library, run through the generic
host, so scripts can reload a real build.
- Sounds that do not load are .none, not an empty clip.
- sk_tag reads an enum field's tag name from the web build, for tests.
|
|
|
The root is the game. The platform library moves to lib/sketchbook (with
serve_web.py, which serves any sketch's web build, as a tool of it), and
vecanim to sketches/vecanim, still its own package on the same library.
|