summaryrefslogtreecommitdiff
path: root/src/abi.zig
Commit message (Collapse)AuthorAge
* micscope: a take starts its file empty; a deleted take's file stays, and whyGabriel Schneider3 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Phase 1 left two loose ends in micscope's take files. A new take could continue an old file when its id met one already written without a jump in between (the jump is what moves next_id past written files), and a deleted take's file stayed on disk. The host gains one call beside appendFile: f.host.writeFile(name, bytes) writes a new, empty file of that name, through the same vtable entry with a `replace` flag. The old file is unlinked, so a readFile mapping of it keeps its bytes, and the host's cached mapping is retired (kept until exit, the sketch may hold it) so the next readFile maps the new file. The web host writes nothing, as for appendFile. micscope writes each take's file so when the take begins: on the frame whose transport request is newly `recording`, live, and not a jump (a jump's requests are restored State's, not a beginning; a fresh Session counts old requests as handled, so a restart mid-recording keeps its file), before the takes are read; `open` writes a file's samples so too. A deleted take's file stays: its State entry comes back with any seek or mark from before the delete, marks are kept with no end, and an exported session carries them; neither the sketch (which cannot see the history) nor the host (which cannot read State's meaning) can tell when none is left. So "never, safely": the file is kept. Tests: zig build test, 164/166 steps, 132/132 tests (the appendFile test now also replaces a file and reads back only the new bytes); the one failure was the Typst bench's 1 ms bound (1.024 ms), timing code this change does not touch, on a machine loaded by other builds; it passed in the next full run (166/166, with the change above this one). micscope's zig build test, 67/67 steps, 10/10 tests. Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* Delete the Store; State is checked against the 64 MiB a save holdsGabriel Schneider3 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A sketch's data is State: flat bytes, what grows has its capacity in its type. The Store, a heap in a file mapped at 0x2000_0000_0000 with 64 GiB reserved, its power-of-two allocator, its root adopt and migration, and its test, are gone from memory.zig; so are Context.store and store_root, Info.store, Memory.store, the Store declaration's glue, Init.store, Frame.store and Console.store, the web host's store in wasm memory, the host's StoreFile wiring and `<state>.store` file, the `.store` suffix in moving an old state into .sketchbook/, the build's tests' `rm` of it, and layout.check's `pointers` flag (State is the one checked memory now). Its one real user, micscope, moved off it in the change before. Old `.state.store` files are not read, converted or deleted, and stay ignored by .gitignore. A sketch that still declares a Store gets no error for the declaration: nothing reads it, and a `*Store` parameter is a compile error (no argument of that type). layout.of(T, .state) refuses a State bigger than layout.max_state, 64 MiB, one constant: "State is N bytes, and a save holds at most 64 MiB: lower a capacity (an array, an sk.List), or keep what need not be saved in Session." The pointer-hash gap the spec found (a Store pointer's element type changing kept the old bytes) is gone with the only persisted memory that held pointers. README: no Store row, allocator row, migration paragraph, file bullet or known limits; draw and command lose their store parameter; State's row says 64 MiB at most; data that grows and is the user's work goes in a List in State or, bigger than a save, in files the sketch appends to. Tests: zig build test, 166/166 steps (the store's unit test gone; new: a 65-MiB State fails to compile with the message above, by expect_errors). micscope, spheres, noc's e2e and drat-meout's test unchanged and green. Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* micscope off the Store, its takes files written through Host.appendFileGabriel Schneider3 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The library could read a file and not write one, so micscope kept its takes in the Store: a tape appended every frame while recording, which a save of 64 MiB could not hold (under six minutes of 48 kHz audio, and micscope allows ten-minute takes). Now a sketch has one call that writes: f.host.appendFile(name, bytes) appends to `<state>.<name>`, beside the state file (in .sketchbook/ under `zig build run`), creating it, and returns the file's path for readFile, or "" when nothing was written. It is pointer and length in, a C-callconv entry in the vtable like newSound. Only draw and command have a host, so a write is not replayed, like sound. The web host writes nothing and returns "". readFile still maps a file once, so what is appended after is not in what it returned. A scripted --fresh run works on `<state>.<pid>`; the files it appends to are `<state>.<pid>.<name>`, and the exit now moves every file of the run (found by that prefix in the state's directory) to the given name, or removes them for an export, where it moved the state and its store by two fixed suffixes. micscope: State lists the takes (sk.List(Take, 64): id, source) and the counter, next_id; `update` adds a take when recording starts and removes one on delete. Each take's samples are `take-<id>.f32` (mono f32 at the host's rate), appended to by draw as it records and by `open`, which also puts them straight into Session (the web keeps no files). Session holds the tape (every take's samples, read from their files once a process) and a clip per take (start, len, and heard, the playhead, which a restart no longer keeps); draw makes the tape follow State: a take State lost leaves it, one it lacks is read from its file. A deleted take's file stays, so a seek back finds it again; after a jump (start, seek, load, set, reload) draw moves next_id past take files already written (--fresh keeps them, and a seek back finds the future's) with a `next-id N` command. Gone: the Store, the remove request, the `takes N` command that told State the Store's count, adoptTape. Old micscope.state.store files are not read: their takes stay in them. README: appendFile among the host calls, a paragraph on it, and the private run's appended files. Tests: zig build test, 164/164 steps, 133/133 tests (one new: appendFile appends beside the state and names the file). micscope's zig build test, 67/67 steps, 10/10 tests; transport.script reads `takes.len`, loses the miscounted-takes check with its mechanism, and gains a deleted take read back from its file after `load` and the counter moved past written files. Pictures: the four scripts' 18 screenshots before and after, compared by pixel: the differences are where two runs of one build differ by themselves (playheads, the microphone's take lengths, the live view). Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* audio: a voice's rate (its pitch), and groups of voices under one gainGabriel Schneider3 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Voice.rate is the voice's playback speed and so its pitch: 2 is an octave up and half as long, 0 holds it, and changing it does not restart the voice. The mixer keeps a fractional cursor and resamples by linear interpolation between a sample and the next (the last toward silence, or the first when looping): the least code that sounds right, a little dull far from 1; at rate 1 the samples come out exactly. An infinite or NaN rate ends the voice instead of crashing the conversion. Voice.group (0-7) puts a voice under a group's gain, which draw declares each frame with f.gain(group, value) (Command.gain); a group not given one plays at 1, so it is declared state and replays like the voices. The mixer glides each group toward its gain by 1/480 a sample (10 ms for a full swing), so a gain set in one step does not click. Music ducking under speech is then the sketch lowering one number; nothing ducks by itself. The web host ignores gains as it ignores voices. Test: half and double speed against the interpolated samples, rate 0 holding, an infinite rate ending; a looping voice in group 1 at gain 0.5 gliding there and staying while group 0's is untouched, and going back to 1 when the gain is no longer declared. test-audio also builds the voices sketch for the web, which compiles the web host's newSound and gain. The README lists rate, group and f.gain with what they do. Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* host.newSound: samples a sketch made become a sound, played by voicesGabriel Schneider3 days
| | | | | | | | | | | | | | | | | | | | | | | A sketch that synthesised a one-shot had to stream it (and keep a replay from re-firing it by hand) or encode a WAV for decodeSound. host.newSound (samples) copies mono samples at in.sample_rate into the host and gives an Audio like a loaded one, so the one-shot is a voice: reconciled by key and serial, mixed, faded and limited by the host. It is kept for the life of the host like every sound, and .none if a sample is not finite. The vtable entry is C callconv (pointer and length), as anything new in abi.zig is, for a second host; the web host keeps the copy for samples() (its voices are silent). Tests: a unit test that the sound is a copy and that NaN and infinity are refused; test/voices.zig makes a 1000-sample blip in setup and declares it under a serial space bumps, and test/voices.script checks it sounds once, stays silent through a recording of it played, stepped and seeked, and sounds again for a new serial. For that, expect-audio KEY also passes when voice KEY was mixed since it was last asked, and expect-no-audio KEY says it was not. zig build test-audio runs the script too. Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* Merge the session recorder and the talk primitivesGabriel Schneider3 days
|\ | | | | | | | | | | | | Recording (sessions, marks, clips, the reload speed-ups under them) and anim's Deck with its example talk, together; no conflicts; zig build test: 161/161 steps, 127/127 tests. Co-Authored-By: Claude Fable 5.2 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
| * anim: Event.key, and the talk example runs in a windowGabriel Schneider3 days
| | | | | | | | | | | | An Event says its key (abi.Event.key), which the player and the talk example each spelled out by hand; `zig build talk` shows examples/talk.zig in a window on the generic host, its state under .zig-cache, and `zig build talk-lib --watch` beside it reloads every edit in place. Co-Authored-By: Claude Fable 5.2 <[email protected]>
* | Record every run's frames to a sessions database in xitdbGabriel Schneider3 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Live play was recorded only after someone typed record N, into 16 fixed slots. Now every run is a session in one xitdb database per sketch, beside its state file (<name>.xitdb): an append-only log of the frames live update was fed, one commit a second of session time, and keyframes of the State at start, every minute, on jumps, before and after reloads and at exit. A kill -9 loses at most the uncommitted second (test-kill). Whether a build records travels in the sketch: App.Options.record, null meaning Debug, reaching the host as Info.record. Scripted runs from fresh state record in memory, exports not at all. Each stretch of a session keeps its build, layout and Info.source: the repository revision (one jj or git call per build, build_info), zig version, backend and mode. Sessions.zig takes plain data (bytes, events, strings, a path, an Io), so a second host can drive it. Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* | Compute abi.hash's layout half once per abi change, not in every compileGabriel Schneider3 days
| | | | | | | | | | | | | | | | | | The comptime walk over the shared types cost about half a second of every sketch library's compile. abi_hash.zig runs it at build time, once per change of the abi sources (watched like any input), and build.zig hands the number to host and sketches as the module abi_hash; abi.hash folds in the build as before. The value is the walk's own, computed for the build machine in Debug.
* | Refuse a sketch library built by another compiler, backend or modeGabriel Schneider3 days
|/ | | | | | | | abi.hash now covers the zig version, codegen backend and optimize mode: Zig's own calling convention (Host.VTable, every Allocator) differs between them, so a Debug host loading a ReleaseFast or LLVM library faulted on its first draw. Libraries export sketch_build, and the host's refusal says what differs and what to run instead.
* gpu: add a post-process pass with optional depth sampling, and describe the ↵Gabriel Schneider3 days
| | | | | | | | | | executor pardes shares `f.postProcess(source, target, .{...})` records a fullscreen pass that samples a completed render into a distinct target image: colour at fragment binding 0 and, with `sample_depth`, depth at 1, which needs the source's latest pass to have depth and one sample (missing depth, multisampled depth and feedback loops are rejected). The scene format's version 4 carries it, the executor records it on the caller's command buffer and owns the sampler, the web host does the same with its texture and sampler pairs, and native profiling reports the work as `postprocess`. The README says how to use it. docs/pardes-rendering.md describes the executor as pardes uses it for addon scenes: a borrowed SDL GPU device, `record` into the caller's command buffer, `run`, `output` and `postProcess`. The working copy as it stood on 2026-11-16; message written by Claude from the diff, at the author's request.
* Add display-paced frame timing and presentation feedback in ZigGabriel Schneider4 days
|
* Add glTF scene rendering, resource setup and 9P controlsGabriel Schneider4 days
|
* Add reusable GPU backdrop filtering to the shared canvasGabriel Schneider7 days
| | | | Draw native GPU frames through the same bounded canvas used by headless capture. Backdrop commands reuse one snapshot and shader state, with an unchanged fallback on unsupported renderers. Verified through native debugger lenses, restart, and repeated font zoom checks.
* sketchbook: JetBrains Mono NL (no ligatures) for the code faces, and its ↵Gabriel Schneider8 days
| | | | medium weight (.code_medium)
* sketchbook: JetBrains Mono bundled as three more faces (.code, .code_bold, ↵Gabriel Schneider8 days
| | | | .code_italic), for programs
* sketchbook: text rasterized at one scale and drawn at another ↵Gabriel Schneider8 days
| | | | (f.textScaled), steady under a moving camera
* sketchbook: text in six faces of the Go family, all bundled (f.textIn, ↵Gabriel Schneider8 days
| | | | host.textSizeIn, sk.Face)
* sketchbook: frames for ffmpeg (--export, on a clock of its own), text sizes, ↵Gabriel Schneider8 days
| | | | | | a font from the environment Co-Authored-By: Claude Fable 5.2 <[email protected]>
* sketchbook: a drawing layer on top, host fixes for replay and migrationGabriel Schneider8 days
|
* sketchbook: Zig 0.17, a Store on disk, requests, a scope (waveform, ↵Gabriel Schneider8 days
| | | | spectrum, spectrogram), audio codecs and fonts, web host
* sketchbook: what the game's review neededGabriel Schneider2026-09-25
| | | | | | | | | | | - input.started: true on the first update of a run, never after a reload, for a sketch to stop what should not resume from saved state. - A console line that errors fails its script. Sketch commands answer unknown, done or failed (abi.Outcome) instead of a bool that hid errors. - addScript also takes the hot-reloadable library, run through the generic host, so scripts can reload a real build. - Sounds that do not load are .none, not an empty clip. - sk_tag reads an enum field's tag name from the web build, for tests.
* Put the game first: lib/sketchbook, sketches/vecanimGabriel Schneider2026-09-25
The root is the game. The platform library moves to lib/sketchbook (with serve_web.py, which serves any sketch's web build, as a tool of it), and vecanim to sketches/vecanim, still its own package on the same library.