| Commit message (Collapse) | Author | Age |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The library could read a file and not write one, so micscope kept its
takes in the Store: a tape appended every frame while recording, which a
save of 64 MiB could not hold (under six minutes of 48 kHz audio, and
micscope allows ten-minute takes). Now a sketch has one call that
writes: f.host.appendFile(name, bytes) appends to `<state>.<name>`, beside
the state file (in .sketchbook/ under `zig build run`), creating it, and
returns the file's path for readFile, or "" when nothing was written. It
is pointer and length in, a C-callconv entry in the vtable like newSound.
Only draw and command have a host, so a write is not replayed, like
sound. The web host writes nothing and returns "". readFile still maps a
file once, so what is appended after is not in what it returned.
A scripted --fresh run works on `<state>.<pid>`; the files it appends to
are `<state>.<pid>.<name>`, and the exit now moves every file of the run
(found by that prefix in the state's directory) to the given name, or
removes them for an export, where it moved the state and its store by
two fixed suffixes.
micscope: State lists the takes (sk.List(Take, 64): id, source) and the
counter, next_id; `update` adds a take when recording starts and removes
one on delete. Each take's samples are `take-<id>.f32` (mono f32 at the
host's rate), appended to by draw as it records and by `open`, which also
puts them straight into Session (the web keeps no files). Session holds
the tape (every take's samples, read from their files once a process)
and a clip per take (start, len, and heard, the playhead, which a restart
no longer keeps); draw makes the tape follow State: a take State lost
leaves it, one it lacks is read from its file. A deleted take's file
stays, so a seek back finds it again; after a jump (start, seek, load,
set, reload) draw moves next_id past take files already written
(--fresh keeps them, and a seek back finds the future's) with a
`next-id N` command. Gone: the Store, the remove request, the `takes N`
command that told State the Store's count, adoptTape. Old
micscope.state.store files are not read: their takes stay in them.
README: appendFile among the host calls, a paragraph on it, and the
private run's appended files.
Tests: zig build test, 164/164 steps, 133/133 tests (one new: appendFile
appends beside the state and names the file). micscope's zig build test,
67/67 steps, 10/10 tests; transport.script reads `takes.len`, loses the
miscounted-takes check with its mechanism, and gains a deleted take read
back from its file after `load` and the counter moved past written files.
Pictures: the four scripts' 18 screenshots before and after, compared by
pixel: the differences are where two runs of one build differ by
themselves (playheads, the microphone's take lengths, the live view).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Voice.rate is the voice's playback speed and so its pitch: 2 is an octave
up and half as long, 0 holds it, and changing it does not restart the
voice. The mixer keeps a fractional cursor and resamples by linear
interpolation between a sample and the next (the last toward silence, or
the first when looping): the least code that sounds right, a little dull
far from 1; at rate 1 the samples come out exactly. An infinite or NaN
rate ends the voice instead of crashing the conversion.
Voice.group (0-7) puts a voice under a group's gain, which draw declares
each frame with f.gain(group, value) (Command.gain); a group not given
one plays at 1, so it is declared state and replays like the voices. The
mixer glides each group toward its gain by 1/480 a sample (10 ms for a
full swing), so a gain set in one step does not click. Music ducking
under speech is then the sketch lowering one number; nothing ducks by
itself. The web host ignores gains as it ignores voices.
Test: half and double speed against the interpolated samples, rate 0
holding, an infinite rate ending; a looping voice in group 1 at gain 0.5
gliding there and staying while group 0's is untouched, and going back to
1 when the gain is no longer declared. test-audio also builds the voices
sketch for the web, which compiles the web host's newSound and gain. The
README lists rate, group and f.gain with what they do.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A sketch that synthesised a one-shot had to stream it (and keep a replay
from re-firing it by hand) or encode a WAV for decodeSound. host.newSound
(samples) copies mono samples at in.sample_rate into the host and gives an
Audio like a loaded one, so the one-shot is a voice: reconciled by key and
serial, mixed, faded and limited by the host. It is kept for the life of
the host like every sound, and .none if a sample is not finite. The
vtable entry is C callconv (pointer and length), as anything new in
abi.zig is, for a second host; the web host keeps the copy for samples()
(its voices are silent).
Tests: a unit test that the sound is a copy and that NaN and infinity are
refused; test/voices.zig makes a 1000-sample blip in setup and declares it
under a serial space bumps, and test/voices.script checks it sounds once,
stays silent through a recording of it played, stepped and seeked, and
sounds again for a new serial. For that, expect-audio KEY also passes
when voice KEY was mixed since it was last asked, and expect-no-audio KEY
says it was not. zig build test-audio runs the script too.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
export-session [S] FILE writes session S (this run's by default, committed
first), with the marks and clips that point into it, as session 0 of a new
database: written beside FILE, synced, renamed over it. import FILE appends
each session of such a file to this database, from "import <file name>",
its marks and clips renamed NAME@<file name> (cut to 32 bytes). The copy is
value by value, the same few lines for both, over whatever a session holds;
sessions lists where one came from.
test-import records test/past.script's session, exports it, imports it into
another database and replays it there: the mark it carries is the State
half a second in exactly, and two seconds in is frame 120's.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
zig build run, probe and export pass --state .sketchbook/<name>.state. The
host makes that directory with a .gitignore of * (a sessions database
grows, and the jj snapshot build_info takes would commit it while under a
megabyte), and moves the state and store an older build kept beside it in
once, with renameat2(NOREPLACE): when both exist nothing moves and the
host says so. Without --state an interactive run keeps its files in
$XDG_DATA_HOME/<name>/ (~/.local/share without it), not the cwd; a script
or an export still uses sketch.state. test-paths checks all three cases.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
play session S [at SECONDS] restores the session's keyframe before that
time (a binary search over its keyframes' times), replays its frames up to
it and leaves it paused there; without a time it plays from the start. At
each later keyframe the replay reaches, the State is compared with it over
the leaves migration kept: a keyframe taken of what update made (periodic,
mark, before a reload, exit) that differs is reported once, "diverged
before frame F: N values, first <field>", and every keyframe is restored,
so a replay across a jump the log does not hold (set, load, a sketch
command) goes on from the State that followed it. A session built from
another source or build says so. The console's status line names the
session, frame and time, the mark, the clip and where it records.
test-past records a session, replays it by the same build (the mark's
State exactly, frame 120's two seconds in, no divergence), then by a build
with an edited fixture (one divergence, before the mark).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The state file keeps live state only (SKETCH03, one slot). save NAME is a
keyframe and a mark in the sessions database, synced to disk; load, diff,
snapshot and expect-snapshot take mark names, through the keyframe's own
layout migrated to today's, compared over the leaves migration kept. A
file from before (SKETCH01/02) has its used snapshot slots imported as
marks "1".."7" at open, then drops them; a run that records nothing
leaves them alone.
record NAME, stop and play NAME make and play clips: a frame range of a
session and its start keyframe, nothing overwritten, nothing invalidated
by a later save, no capacity. The 64 MiB .inputs file, its --fresh memset
and Timeline's Bank are gone; numbers still work as names, so every
existing script runs unchanged. Event times in a clip are the session's,
not restarted at record. reload.script also checks that a field a reload
drops is still in the keyframe taken before it (expect-key).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Live play was recorded only after someone typed record N, into 16 fixed
slots. Now every run is a session in one xitdb database per sketch, beside
its state file (<name>.xitdb): an append-only log of the frames live
update was fed, one commit a second of session time, and keyframes of the
State at start, every minute, on jumps, before and after reloads and at
exit. A kill -9 loses at most the uncommitted second (test-kill).
Whether a build records travels in the sketch: App.Options.record, null
meaning Debug, reaching the host as Info.record. Scripted runs from fresh
state record in memory, exports not at all. Each stretch of a session
keeps its build, layout and Info.source: the repository revision (one jj
or git call per build, build_info), zig version, backend and mode.
Sessions.zig takes plain data (bytes, events, strings, a path, an Io), so
a second host can drive it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
| |
A load copied the whole library to $XDG_RUNTIME_DIR (a read/write loop
across filesystems) and then hashed all of it for the build id: 40 ms for
a 10 MB Debug library, 200 ms for drat-meout's 58 MB. dlopen only needs a
fresh name, so the host links one to an fd open on the library, which also
pins the file a build may rename over meanwhile. The build id recordings
carry is a hash of the file's inode, size and modification time: Zig's own
linker writes no build-id note in Debug.
|
| |
|
|
|
|
|
|
|
|
| |
executor pardes shares
`f.postProcess(source, target, .{...})` records a fullscreen pass that samples a completed render into a distinct target image: colour at fragment binding 0 and, with `sample_depth`, depth at 1, which needs the source's latest pass to have depth and one sample (missing depth, multisampled depth and feedback loops are rejected). The scene format's version 4 carries it, the executor records it on the caller's command buffer and owns the sampler, the web host does the same with its texture and sampler pairs, and native profiling reports the work as `postprocess`. The README says how to use it.
docs/pardes-rendering.md describes the executor as pardes uses it for addon scenes: a borrowed SDL GPU device, `record` into the caller's command buffer, `run`, `output` and `postProcess`.
The working copy as it stood on 2026-11-16; message written by Claude from the diff, at the author's request.
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
Draw native GPU frames through the same bounded canvas used by headless capture. Backdrop commands reuse one snapshot and shader state, with an unchanged fallback on unsupported renderers. Verified through native debugger lenses, restart, and repeated font zoom checks.
|
| |
|
|
| |
host.textSizeIn, sk.Face)
|
| |
|
|
|
|
| |
a font from the environment
Co-Authored-By: Claude Fable 5.2 <[email protected]>
|
| | |
|
| |
|
|
| |
spectrum, spectrogram), audio codecs and fonts, web host
|
| |
|
|
|
|
| |
The renderer's draw blend mode was left at SDL's default, none, so every
translucent fill (panels, labels, HUD bars) drew opaque natively while the
web honored alpha. It blends now.
|
| |
|
|
|
|
|
|
|
|
|
| |
- input.started: true on the first update of a run, never after a reload,
for a sketch to stop what should not resume from saved state.
- A console line that errors fails its script. Sketch commands answer
unknown, done or failed (abi.Outcome) instead of a bool that hid errors.
- addScript also takes the hot-reloadable library, run through the generic
host, so scripts can reload a real build.
- Sounds that do not load are .none, not an empty clip.
- sk_tag reads an enum field's tag name from the web build, for tests.
|
| |
|
|
|
|
|
|
| |
The offscreen hints lost to the environment: with SDL_VIDEO_DRIVER=wayland
set, every headless test and script opened a real window. They are
overrides now. The offscreen driver has no Vulkan surface on every driver,
so a headless host's GPU renderer gets no window and draws into a
canvas-sized texture, which screenshots read.
|
|
|
The root is the game. The platform library moves to lib/sketchbook (with
serve_web.py, which serves any sketch's web build, as a tool of it), and
vecanim to sketches/vecanim, still its own package on the same library.
|