| Commit message (Collapse) | Author | Age |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A compute shader's output was heard only after the sketch read it back
(f.download, a frame later) and pushed it behind a lead of its own
choosing; spheres kept 100 ms, and a change it made left for the device
96 ms later on average (measured, dummy driver, 60 Hz).
f.audioBuffer(key, buffer, .{ .count, .offset }) streams `count` f32 a
shader wrote: the host copies them back while it runs the frame's
commands, waiting on the copy's fence (Executor.read: 0.2 ms on average
here, 2 ms at the 99th percentile on a loaded machine), and queues them
on the stream, so nothing is in flight between frames and the sketch
keeps no books. Input.lead says how far ahead to make sound: the slowest
of the last 64 frames' worth of samples (timed between the ends of the
frames' commands, where the pushes are), plus the device's pull (what
SDL takes from a stream at once, read from the device: 1024 here), plus
half a pull for each underrun, a sample less each frame after; capped at
8192. A sketch pushes `in.lead -| in.stream(key).queued` a frame, and
its change leaves after about what is queued ahead of it, a pull: 19 to
27 ms on average with SDL's 1024-sample pulls, 6.3 to 6.5 ms with 256
(SDL_AUDIO_DEVICE_SAMPLE_FRAMES; 17 under heavy load). Stream.underruns
counts the pushes that found a stream empty though the frame before had
fed it (a gap).
The voices keep their 2048 samples: mixed to the lead, a one-shot longer
than it is mixed over several frames, and voices.script's expect-audio
and expect-no-audio, which look one frame at a time, failed.
On the web, audio.buffer reads the buffer back with mapAsync and queues
it on arrival, in order, counting it as queued meanwhile; in.lead stays
at 100 ms there.
The measurements (a probe patched into the host for the purpose, kept
out of the tree) are in the 02-pardes-code scratch, .scratch/sketch/gpusynth.
Tests: the lead's arithmetic (audio.zig, in test-audio's filter); spheres'
play script checks its stream is fed. zig build test: 164/164 steps,
49/49 tests run (the rest cached); zig build test-audio: 48/48 steps, with
the voices sketch's wasm, so web.zig compiles; voices.script passes four
runs in four. web/host.js: node --check only, no browser run.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Voice.rate is the voice's playback speed and so its pitch: 2 is an octave
up and half as long, 0 holds it, and changing it does not restart the
voice. The mixer keeps a fractional cursor and resamples by linear
interpolation between a sample and the next (the last toward silence, or
the first when looping): the least code that sounds right, a little dull
far from 1; at rate 1 the samples come out exactly. An infinite or NaN
rate ends the voice instead of crashing the conversion.
Voice.group (0-7) puts a voice under a group's gain, which draw declares
each frame with f.gain(group, value) (Command.gain); a group not given
one plays at 1, so it is declared state and replays like the voices. The
mixer glides each group toward its gain by 1/480 a sample (10 ms for a
full swing), so a gain set in one step does not click. Music ducking
under speech is then the sketch lowering one number; nothing ducks by
itself. The web host ignores gains as it ignores voices.
Test: half and double speed against the interpolated samples, rate 0
holding, an infinite rate ending; a looping voice in group 1 at gain 0.5
gliding there and staying while group 0's is untouched, and going back to
1 when the gain is no longer declared. test-audio also builds the voices
sketch for the web, which compiles the web host's newSound and gain. The
README lists rate, group and f.gain with what they do.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A sketch that synthesised a one-shot had to stream it (and keep a replay
from re-firing it by hand) or encode a WAV for decodeSound. host.newSound
(samples) copies mono samples at in.sample_rate into the host and gives an
Audio like a loaded one, so the one-shot is a voice: reconciled by key and
serial, mixed, faded and limited by the host. It is kept for the life of
the host like every sound, and .none if a sample is not finite. The
vtable entry is C callconv (pointer and length), as anything new in
abi.zig is, for a second host; the web host keeps the copy for samples()
(its voices are silent).
Tests: a unit test that the sound is a copy and that NaN and infinity are
refused; test/voices.zig makes a 1000-sample blip in setup and declares it
under a serial space bumps, and test/voices.script checks it sounds once,
stays silent through a recording of it played, stepped and seeked, and
sounds again for a new serial. For that, expect-audio KEY also passes
when voice KEY was mixed since it was last asked, and expect-no-audio KEY
says it was not. zig build test-audio runs the script too.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
above it
Every mixed sample went through x/(1 + |x|), so one voice at 0.5 played
at 0.33, bent. The mix now passes through untouched up to 0.75 (-2.5
dBFS) and above it follows knee + (1 - knee)·u/(1 + u), u the excess over
the room left (the old curve is its knee-0 case): same value and slope
at the knee, rising, tending to 1. A clip normalised to full scale only
has its peaks bent (1 plays at 0.875); two at full scale sum to 0.958.
Per sample, no state, no lookahead, on the frame thread as before.
A unit test checks the curve: identity to the bit below the knee (every
997th float, both signs), rising and at most 1 from the knee to infinity
(every float near the knee), odd, slope 1 at the knee; `zig build
test-audio` runs the mixer's tests alone. The README says what the mixer
does, and that SDL clips the total of the voice mix and the streams.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |
|
|
| |
spectrum, spectrogram), audio codecs and fonts, web host
|
| |
|
|
|
|
|
|
|
|
|
| |
- input.started: true on the first update of a run, never after a reload,
for a sketch to stop what should not resume from saved state.
- A console line that errors fails its script. Sketch commands answer
unknown, done or failed (abi.Outcome) instead of a bool that hid errors.
- addScript also takes the hot-reloadable library, run through the generic
host, so scripts can reload a real build.
- Sounds that do not load are .none, not an empty clip.
- sk_tag reads an enum field's tag name from the web build, for tests.
|
|
|
The root is the game. The platform library moves to lib/sketchbook (with
serve_web.py, which serves any sketch's web build, as a tool of it), and
vecanim to sketches/vecanim, still its own package on the same library.
|