summaryrefslogtreecommitdiff
path: root/test
Commit message (Collapse)AuthorAge
* sk.sfxr: the sfxr sound-effect generator, from 02-dont-rat-me-outGabriel Schneider4 days
| | | | | | | | | | | | | | | | | | | | | | | | 02-dont-rat-me-out's synth.zig, a pure and deterministic port of DrPetter's sfxr, moves into the library as src/sketch/sfxr.zig, exposed as sk.sfxr: render(params, rate, out) gives a coin, blip, laser or explosion as samples for host.newSound. Its knobs count in samples at 44.1 kHz, so the one change is the rate: every length (envelope, arpeggio, repeat, phaser offset, period) grows by rate/44.1 kHz and every per-sample step (slides, duty sweep, vibrato, filter coefficients and their ramps) shrinks by it, to first order for the slides and filters; at 44.1 kHz each factor is 1 and the samples are the original's to the bit. Two spellings change without changing a sample: the phaser buffer is @splat (Zig 0.17 has no ** on arrays) and the phaser delay is clamped before it is converted, so a long sweep cannot overflow it. Test: four parameter sets that between them turn every knob render the lengths and Wyhash of the samples the original rendered at 44.1 kHz (run once, outside the repo), and at 48 kHz a sound as long within 1 %. test/voices.zig makes its blip with sfxr in draw, at in.sample_rate, and is the README's example: a blip in six lines. Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* host.newSound: samples a sketch made become a sound, played by voicesGabriel Schneider4 days
| | | | | | | | | | | | | | | | | | | | | | | A sketch that synthesised a one-shot had to stream it (and keep a replay from re-firing it by hand) or encode a WAV for decodeSound. host.newSound (samples) copies mono samples at in.sample_rate into the host and gives an Audio like a loaded one, so the one-shot is a voice: reconciled by key and serial, mixed, faded and limited by the host. It is kept for the life of the host like every sound, and .none if a sample is not finite. The vtable entry is C callconv (pointer and length), as anything new in abi.zig is, for a second host; the web host keeps the copy for samples() (its voices are silent). Tests: a unit test that the sound is a copy and that NaN and infinity are refused; test/voices.zig makes a 1000-sample blip in setup and declares it under a serial space bumps, and test/voices.script checks it sounds once, stays silent through a recording of it played, stepped and seeked, and sounds again for a new serial. For that, expect-audio KEY also passes when voice KEY was mixed since it was last asked, and expect-no-audio KEY says it was not. zig build test-audio runs the script too. Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* Merge the session recorder and the talk primitivesGabriel Schneider4 days
|\ | | | | | | | | | | | | Recording (sessions, marks, clips, the reload speed-ups under them) and anim's Deck with its example talk, together; no conflicts; zig build test: 161/161 steps, 127/127 tests. Co-Authored-By: Claude Fable 5.2 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
| * examples: a talk that runs its own Deck, and its scriptGabriel Schneider4 days
| | | | | | | | | | | | | | | | | | | | | | | | | | examples/talk.zig keeps an anim.Deck in its State beside its own data, turns clicks and keys into asks and paints with an anim.Painter: two slides, a mass that bobs (loop) while the deck waits, a damping slider laid out and hit-tested in the talk (it takes its clicks), a choice gate that branches on it, and slide 1 cleared beside slide 2's writing. test/talk.script (zig build test-talk) steps it, finishes a step on a click, goes back, jumps slides, drags the slider without advancing, reloads mid-wait with the first step retimed (same step, t a second later) and checks two exports with 2 s holds frame by frame. The vecanim live scene's words follow the new pause.
| * anim: the stock player runs on the DeckGabriel Schneider4 days
| | | | | | | | | | | | | | | | | | | | | | | | The player's State is an anim.Deck plus the viewer's settings; keys and clicks become an Ask: click, space and page down step (space plays or pauses a scene with no pause), page up and backspace go back a step, ] and [ go a slide, P plays or pauses, left/right/home/end/,/. seek through Ask.to and Ask.end. A compiled scene is a talk without gates. The HUD shows the slide and step, and when the talk waits. Exported, each pause holds the scene file's hold (1 s). Its frozen hold (held, stopBetween, proceed) is gone. Scripts read deck.t and deck.playing where they read t and playing.
* | Bound a scripted run's memory sessions; check a script records the same twiceGabriel Schneider4 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A scripted run from fresh state records in memory, and a very long one grew without end. It stops at 256 MiB (ten hours or more of play at 60 Hz; a write the memory database cannot make, out of memory included, is the same): once, a warning, and no more frames, while what it holds still reads (marks, clips, past sessions). test-same plays test/past.script twice into two databases and compares them value by value with test/same_sessions.zig, but for a session's started and ended (the wall clock): every frame, keyframe, stretch and mark follows from the script alone. A third run from fresh state leaves its state file and no database. Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* | Export a session to a file of its own, and import oneGabriel Schneider4 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | export-session [S] FILE writes session S (this run's by default, committed first), with the marks and clips that point into it, as session 0 of a new database: written beside FILE, synced, renamed over it. import FILE appends each session of such a file to this database, from "import <file name>", its marks and clips renamed NAME@<file name> (cut to 32 bytes). The copy is value by value, the same few lines for both, over whatever a session holds; sessions lists where one came from. test-import records test/past.script's session, exports it, imports it into another database and replays it there: the mark it carries is the State half a second in exactly, and two seconds in is frame 120's. Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* | Play past sessions back, re-synced at their keyframesGabriel Schneider4 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | play session S [at SECONDS] restores the session's keyframe before that time (a binary search over its keyframes' times), replays its frames up to it and leaves it paused there; without a time it plays from the start. At each later keyframe the replay reaches, the State is compared with it over the leaves migration kept: a keyframe taken of what update made (periodic, mark, before a reload, exit) that differs is reported once, "diverged before frame F: N values, first <field>", and every keyframe is restored, so a replay across a jump the log does not hold (set, load, a sketch command) goes on from the State that followed it. A session built from another source or build says so. The console's status line names the session, frame and time, the mark, the clip and where it records. test-past records a session, replays it by the same build (the mark's State exactly, frame 120's two seconds in, no divergence), then by a build with an edited fixture (one divergence, before the mark). Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* | Make snapshots named marks and recordings named clips of sessionsGabriel Schneider4 days
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The state file keeps live state only (SKETCH03, one slot). save NAME is a keyframe and a mark in the sessions database, synced to disk; load, diff, snapshot and expect-snapshot take mark names, through the keyframe's own layout migrated to today's, compared over the leaves migration kept. A file from before (SKETCH01/02) has its used snapshot slots imported as marks "1".."7" at open, then drops them; a run that records nothing leaves them alone. record NAME, stop and play NAME make and play clips: a frame range of a session and its start keyframe, nothing overwritten, nothing invalidated by a later save, no capacity. The 64 MiB .inputs file, its --fresh memset and Timeline's Bank are gone; numbers still work as names, so every existing script runs unchanged. Event times in a clip are the session's, not restarted at record. reload.script also checks that a field a reload drops is still in the keyframe taken before it (expect-key). Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* | Record every run's frames to a sessions database in xitdbGabriel Schneider4 days
|/ | | | | | | | | | | | | | | | | | | | | Live play was recorded only after someone typed record N, into 16 fixed slots. Now every run is a session in one xitdb database per sketch, beside its state file (<name>.xitdb): an append-only log of the frames live update was fed, one commit a second of session time, and keyframes of the State at start, every minute, on jumps, before and after reloads and at exit. A kill -9 loses at most the uncommitted second (test-kill). Whether a build records travels in the sketch: App.Options.record, null meaning Debug, reaching the host as Info.record. Scripted runs from fresh state record in memory, exports not at all. Each stretch of a session keeps its build, layout and Info.source: the repository revision (one jj or git call per build, build_info), zig version, backend and mode. Sessions.zig takes plain data (bytes, events, strings, a path, an Io), so a second host can drive it. Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
* host: add optional Tracy profiling and reduce upload allocation stallsGabriel Schneider8 days
|
* sketchbook: JetBrains Mono NL (no ligatures) for the code faces, and its ↵Gabriel Schneider9 days
| | | | medium weight (.code_medium)
* sketchbook: JetBrains Mono bundled as three more faces (.code, .code_bold, ↵Gabriel Schneider9 days
| | | | .code_italic), for programs
* sketchbook: text rasterized at one scale and drawn at another ↵Gabriel Schneider9 days
| | | | (f.textScaled), steady under a moving camera
* sketchbook: text in six faces of the Go family, all bundled (f.textIn, ↵Gabriel Schneider9 days
| | | | host.textSizeIn, sk.Face)
* sketchbook: anim, manim-style scenes as a module (from the game's vecanim), ↵Gabriel Schneider9 days
| | | | | | | | | | | | | with objects a scene draws itself The player takes its canvas from the room it has and fits the scene's frame into it, plays through and quits when exported, and draws vector objects in runs around custom ones. The renderers' resvg comparison and the timings come along as `zig build diff` and `zig build bench`; the comparison's reference is padded to whole blocks rather than squeezed, which had put Typst text over the limit. Co-Authored-By: Claude Fable 5.2 <[email protected]>
* sketchbook: frames for ffmpeg (--export, on a clock of its own), text sizes, ↵Gabriel Schneider9 days
| | | | | | a font from the environment Co-Authored-By: Claude Fable 5.2 <[email protected]>
* sketchbook: a drawing layer on top, host fixes for replay and migrationGabriel Schneider9 days
|
* sketchbook: Zig 0.17, a Store on disk, requests, a scope (waveform, ↵Gabriel Schneider9 days
| | | | spectrum, spectrogram), audio codecs and fonts, web host
* Put the game first: lib/sketchbook, sketches/vecanimGabriel Schneider2026-09-25
The root is the game. The platform library moves to lib/sketchbook (with serve_web.py, which serves any sketch's web build, as a tool of it), and vecanim to sketches/vecanim, still its own package on the same library.