| Commit message (Collapse) | Author | Age |
| |\
| |
| |
| |
| |
| |
| | |
Recording (sessions, marks, clips, the reload speed-ups under them) and anim's Deck with its example talk, together; no conflicts; zig build test: 161/161 steps, 127/127 tests.
Co-Authored-By: Claude Fable 5.2 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
examples/talk.zig keeps an anim.Deck in its State beside its own data,
turns clicks and keys into asks and paints with an anim.Painter: two
slides, a mass that bobs (loop) while the deck waits, a damping slider laid
out and hit-tested in the talk (it takes its clicks), a choice gate that
branches on it, and slide 1 cleared beside slide 2's writing.
test/talk.script (zig build test-talk) steps it, finishes a step on a
click, goes back, jumps slides, drags the slider without advancing,
reloads mid-wait with the first step retimed (same step, t a second later)
and checks two exports with 2 s holds frame by frame. The vecanim live
scene's words follow the new pause.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The player's State is an anim.Deck plus the viewer's settings; keys and
clicks become an Ask: click, space and page down step (space plays or
pauses a scene with no pause), page up and backspace go back a step, ] and
[ go a slide, P plays or pauses, left/right/home/end/,/. seek through
Ask.to and Ask.end. A compiled scene is a talk without gates. The HUD
shows the slide and step, and when the talk waits. Exported, each pause
holds the scene file's hold (1 s). Its frozen hold (held, stopBetween,
proceed) is gone. Scripts read deck.t and deck.playing where they read t
and playing.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
A scripted run from fresh state records in memory, and a very long one grew
without end. It stops at 256 MiB (ten hours or more of play at 60 Hz; a
write the memory database cannot make, out of memory included, is the
same): once, a warning, and no more frames, while what it holds still
reads (marks, clips, past sessions).
test-same plays test/past.script twice into two databases and compares them
value by value with test/same_sessions.zig, but for a session's started and
ended (the wall clock): every frame, keyframe, stretch and mark follows from
the script alone. A third run from fresh state leaves its state file and no
database.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
export-session [S] FILE writes session S (this run's by default, committed
first), with the marks and clips that point into it, as session 0 of a new
database: written beside FILE, synced, renamed over it. import FILE appends
each session of such a file to this database, from "import <file name>",
its marks and clips renamed NAME@<file name> (cut to 32 bytes). The copy is
value by value, the same few lines for both, over whatever a session holds;
sessions lists where one came from.
test-import records test/past.script's session, exports it, imports it into
another database and replays it there: the mark it carries is the State
half a second in exactly, and two seconds in is frame 120's.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
play session S [at SECONDS] restores the session's keyframe before that
time (a binary search over its keyframes' times), replays its frames up to
it and leaves it paused there; without a time it plays from the start. At
each later keyframe the replay reaches, the State is compared with it over
the leaves migration kept: a keyframe taken of what update made (periodic,
mark, before a reload, exit) that differs is reported once, "diverged
before frame F: N values, first <field>", and every keyframe is restored,
so a replay across a jump the log does not hold (set, load, a sketch
command) goes on from the State that followed it. A session built from
another source or build says so. The console's status line names the
session, frame and time, the mark, the clip and where it records.
test-past records a session, replays it by the same build (the mark's
State exactly, frame 120's two seconds in, no divergence), then by a build
with an edited fixture (one divergence, before the mark).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The state file keeps live state only (SKETCH03, one slot). save NAME is a
keyframe and a mark in the sessions database, synced to disk; load, diff,
snapshot and expect-snapshot take mark names, through the keyframe's own
layout migrated to today's, compared over the leaves migration kept. A
file from before (SKETCH01/02) has its used snapshot slots imported as
marks "1".."7" at open, then drops them; a run that records nothing
leaves them alone.
record NAME, stop and play NAME make and play clips: a frame range of a
session and its start keyframe, nothing overwritten, nothing invalidated
by a later save, no capacity. The 64 MiB .inputs file, its --fresh memset
and Timeline's Bank are gone; numbers still work as names, so every
existing script runs unchanged. Event times in a clip are the session's,
not restarted at record. reload.script also checks that a field a reload
drops is still in the keyframe taken before it (expect-key).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Live play was recorded only after someone typed record N, into 16 fixed
slots. Now every run is a session in one xitdb database per sketch, beside
its state file (<name>.xitdb): an append-only log of the frames live
update was fed, one commit a second of session time, and keyframes of the
State at start, every minute, on jumps, before and after reloads and at
exit. A kill -9 loses at most the uncommitted second (test-kill).
Whether a build records travels in the sketch: App.Options.record, null
meaning Debug, reaching the host as Info.record. Scripted runs from fresh
state record in memory, exports not at all. Each stretch of a session
keeps its build, layout and Info.source: the repository revision (one jj
or git call per build, build_info), zig version, backend and mode.
Sessions.zig takes plain data (bytes, events, strings, a path, an Io), so
a second host can drive it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
|
| | |
|
| |
|
|
| |
medium weight (.code_medium)
|
| |
|
|
| |
.code_italic), for programs
|
| |
|
|
| |
(f.textScaled), steady under a moving camera
|
| |
|
|
| |
host.textSizeIn, sk.Face)
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
with objects a scene draws itself
The player takes its canvas from the room it has and fits the scene's
frame into it, plays through and quits when exported, and draws vector
objects in runs around custom ones. The renderers' resvg comparison and
the timings come along as `zig build diff` and `zig build bench`; the
comparison's reference is padded to whole blocks rather than squeezed,
which had put Typst text over the limit.
Co-Authored-By: Claude Fable 5.2 <[email protected]>
|
| |
|
|
|
|
| |
a font from the environment
Co-Authored-By: Claude Fable 5.2 <[email protected]>
|
| | |
|
| |
|
|
| |
spectrum, spectrogram), audio codecs and fonts, web host
|
|
|
The root is the game. The platform library moves to lib/sketchbook (with
serve_web.py, which serves any sketch's web build, as a tool of it), and
vecanim to sketches/vecanim, still its own package on the same library.
|