From 1637cf5efa338fee7797ba83f264dcab5bde4800 Mon Sep 17 00:00:00 2001 From: Gabriel Schneider Date: Tue, 17 Nov 2026 05:50:47 -0300 Subject: examples/live: the interpreter of a tape, and its probe Demo 1's route: a program becomes a flat tape of at most 128 instructions (src/Lang.zig: the ops, the instruction, the tape and the two uniform blocks that carry it; build.zig writes Lang.Op out as ops.glsl, so the op numbers have one definition), and ONE interpreter, shaders/vm.glsl, runs it per pixel (picture.frag) and per sample (synth.comp, crossing from the tape it replaces over the first `fade` samples). Instruction i writes register i; the tape is pushed as uniforms. The probe measures it before anything else is built: `zig build probe` plays made-up tapes (every instruction reaching the last, a noise in ten) under --profile-gpu. RTX 3050 (driver 620.70.06), Debug host, means of 601 frames, three runs agreeing within 0.07 ms: picture, empty tape 720p 0.14-0.23 1080p 0.19-0.28 (a pass's cost) picture, 60 720p 1.38-1.45 1080p 2.89-2.96 picture, 128 720p 2.71-2.81 1080p 5.86-5.95 picture, 128 at 640x360 0.85-0.94 The budget, under 2 ms at 1280x720: 60 instructions meet it, 128 do not. The cheap fixes, on 128 at 720p: the tape in a storage buffer 2.97-3.03 (worse); the registers as an array of 16 (kept in registers, indexing turned into selects) 5.82-5.93 (twice as slow); the 128-array with only 16 slots used 2.11-2.34 (cache footprint: a register allocator would buy about a sixth); half resolution 0.85-0.94. So the sketch will draw a tape longer than 64 instructions at half resolution, scaled up. The variants are kept outside the tree. The synth's numbers taken here were of a kernel that wrote nothing (its uniform block was past SDL's 4 KiB): the sound's change measures it again. Co-Authored-By: Claude Opus 5.5 Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T --- examples/live/test/probe.script | 4 ++++ 1 file changed, 4 insertions(+) create mode 100644 examples/live/test/probe.script (limited to 'examples/live/test') diff --git a/examples/live/test/probe.script b/examples/live/test/probe.script new file mode 100644 index 0000000..fc2e162 --- /dev/null +++ b/examples/live/test/probe.script @@ -0,0 +1,4 @@ +# The probe (src/probe.zig): frames enough for steady means, and what the +# 60-instruction tape draws, to see that the interpreter runs. +frames 600 +screenshot .zig-cache/live/probe.png -- cgit v1.3