summaryrefslogtreecommitdiff
path: root/design/motion.md
diff options
context:
space:
mode:
Diffstat (limited to 'design/motion.md')
-rw-r--r--design/motion.md52
1 files changed, 32 insertions, 20 deletions
diff --git a/design/motion.md b/design/motion.md
index 6187a51..4a22f92 100644
--- a/design/motion.md
+++ b/design/motion.md
@@ -8,26 +8,38 @@ frame. Where the two disagree this one wins; the tokens to change are under
Times are at 60 frames a second: "12 f" is twelve frames, 0.20 s.
-**Since the context revision** (`README.md`, revision 2) every frame holds
-the whole context and one lens. The direction below stands and applies to
-those panels; five details of it read differently now:
+**Since the design language** ([`README.md`](README.md)): the blocks this
+page moves have names there, and its [verbs](README.md#6-verbs) are this
+page's charts in one table. The direction below stands. What reads
+differently now:
-- There is no head. The step counter and the progress line are on the
- clock rule over the caption.
+- There is no head. The step counter and the progress line are the `clock`.
- In the context a strike arms with a 2-unit frame, pulses out 3 units, and
- cools to nothing, leaving a tick at the value's left where this page says
- ember and bar. A lens's cells keep the ember and the bar.
-- A telescope whose first link is struck is followed again link by link,
- 4 f apart, each fading in over 6 f. A register's plaque then slides to
- what the register now points at (24 f, `glide`), and the step's one link
- draws (24 f, `standard`); the link fades over 18 f at the advance.
-- The levels of the cascade are places in one frame: the disassembly's note
- and the registers (CPU), the stack and the lens's words (memory), the
- lens's drawing (the idea). The order and the 18 f between them are the
- same.
-- The camera rests at x1.5 as well, and that is its usual scale: a frame of
- 1195 by 560. At x2 the frame is 896 by 420. It always returns to the
- whole frame.
+ cools to nothing, leaving the `held` tick where this page says ember and
+ bar. A lens's cell cools to a bar along its bottom edge.
+- `extend`: a chain whose first hop is struck is followed again hop by
+ hop, 4 f apart, each fading in over 6 f.
+- `link`: 6 f after a register's strike its old `pin` fades (12 f) and the
+ line draws from the register's row to the thing it now points at, head
+ first (24 f, 36 f over 400 units, `standard`). The pin lands with the
+ head and settles (12 f). At the advance the line draws back into the pin
+ (18 f). "Its plaque slides" and "its tag travels", below, are this.
+- `project`: the idea's slot in the cascade is a tie. When bytes in the
+ dump are read or struck, a bracket takes their row (6 f) and a line
+ draws from them to the part of the drawing they are (18 f, `standard`).
+ The drawing reacts when the line arrives and not before: its bytes are
+ always 18 f ahead of it. Out with the advance (18 f).
+- `advance`: the `thread` (the bracket on the source line, the brackets on
+ its instructions, the line between) moves with the plaques and rip, as
+ one mark, last.
+- `establish`, for a lens: its dump first; then each element rises from
+ its row by `project`, 6 f apart in address order, and the lines go.
+- The levels of the cascade are places in one frame: the pc's annotation
+ and the registers (CPU), the stack's slots and the dump's bytes
+ (memory), the drawing (the idea). The order and the 18 f between them
+ are the same.
+- The camera rests at x1.5 as well, and that is its usual scale: a frame
+ of 1195 by 560. At x2 the frame is 896 by 420. It always returns.
## What was measured
@@ -504,8 +516,8 @@ the middle third. If they move out of it the frame glides a whole row
## Revised tokens
-In `anim/src/theme.zig` (and the same figures in `design/README.md`,
-"Motion"):
+In `anim/src/theme.zig` (the verbs of `design/README.md` use the same
+figures):
| Token | Was | Is |
| --- | --- | --- |