summaryrefslogtreecommitdiff
path: root/src/builtins.zig
Commit message (Collapse)AuthorAge
* An Edit filter that can never be reaped no longer holds the Edit's answer: ↵Gabriel Schneider86 min.
| | | | | | at the limit the command's group is killed and reaped off the answer's path, the stdin writer owning its input, so a filter writing its own ctl with > or >> answers EIO at 10 s instead of hanging; a running Edit keeps its own copies of the names it reports, and the panes it changes refuse Del, delete, rmdir, Undo, Redo, Get and Zerox (busy, EBUSY); e and r say unreadable files in Get's words; the reference says both sides of a filter's own ctl write need <> Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Get of a file not there, or of a directory, says so before asking about ↵Gabriel Schneider2 hours
| | | | | | unsaved edits; the init file saved in a pane logs a bad line as err - init file line N, as startup does, its commands still not run again Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Round 39's small ones: a name write past its one line is refused by that ↵Gabriel Schneider4 hours
| | | | | | write; Get and Edit's e load over a scratch under 100 bytes unasked, as Del closes it; Putall saves a Zerox pair once; bare Tab on the root ctl says the width as from a pane, and a ctl check of Tab no longer sets it; a directory read is "is a directory" (EISDIR), an unreadable file "permission denied" (EACCES), Incl of a file "not a directory" (ENOTDIR), and a device "not a regular file", never read to the stream limit Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A refused Putall is answered once the other saves have landed; a bad Tab ↵Gabriel Schneider5 hours
| | | | | | width is invalid (EINVAL), from a pane's exec too; Incl refuses a relative or missing directory and takes - only alone Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Undo after Get file or Edit's e puts the old name back with the old text and ↵Gabriel Schneider6 hours
| | | | | | | | | | its clean state, so a Save or Putall after it writes nothing over the loaded file; a Get file that fails, or is asked about unsaved edits, renames nothing; Get file in a directory pane is refused with how to open it ctl.getFile is the one load-under-a-name path: it reads first, then makes one undo step (whose snapshot now keeps the name and its saved state), renames and loads, and leaves the pane clean. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Edit runs acme's file and shell commands: < | > through the session's Shell ↵Gabriel Schneider7 hours
| | | | | | off the loop (one undo step, a failure changes nothing, its stderr in +Errors, a 9P write answered when done), X and Y over the open text panes, b B D e r f w and the "file" address; checked against sam -d, and the reference's Edit section and Coming from acme row say so Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Zerox opens a second pane on a file pane's buffer: one text, undo and ↵Gabriel Schneider7 hours
| | | | | | | | | | | | | | | | unsaved state, a scroll and a cursor each; an edit in either is spliced into both at File.setContentSpan, O(the edit) more, and what a Save, a get, the disk watch or a rename changes on one is copied to the rest after each step Twins share the content buffer, the History and, while it is one, the line index; the other twin's cursor and scroll move past the splice as acme moves a clone's q0. Del of one twin asks nothing while another holds the text, Exit lists the text once, and a closed twin keeps a copy of its own until it is torn down. Both are in the index, each its serial, one name. An event reader on one hears no edit made through another (first cut). A dump keeps the twins as two panes on the file, not linked again. perf: edit-twin, typing beside a twin of the 50k-line file, gated within 3x of edit-char in the same run; the three baselines re-recorded for it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Tab N sets a tab's width in cells, 1 through 16, in every pane, drawn and ↵Gabriel Schneider7 hours
| | | | | | | | | | | counted (wrapping, clicks, the cursor); bare Tab says it; the ctl read and a Dump keep it A session setting, not acme's per window: the width is read by File's pure width functions (~130 callers that are given no pane), so it is one value, config.tab_now, that Runtime.apply sets and a new session resets. A file:L:C column counts runes, as compilers do, and never depended on it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Incl dir ... adds directories a look at a name found nowhere else is tried ↵Gabriel Schneider7 hours
| | | | | | in, as acme's includename, <stdio.h> too; bare Incl lists them and Incl - empties them; the session's, seeded with /usr/include and /usr/local/include, kept in a dump; Indent's refusal says Enter keeps the indent always Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Putall saves every pane holding unsaved edits to a file, each as its own ↵Gabriel Schneider9 hours
| | | | | | Save, a refused one said and the rest saved all the same Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Get reads a pane's file again, refusing unsaved edits once as Del does, and ↵Gabriel Schneider9 hours
| | | | | | Get file loads that file into the pane; in a directory pane it reads the directory again. Load is Restore, as Put is Save; Abort's refusal says it is acme's debugging word Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A look at a directory opens a pane listing it, as acme's directory window: ↵Gabriel Schneider9 hours
| | | | | | named dir/, its entries in acme's columns (bytewise, dotfiles kept, a directory's marked /), a look at an entry from there, Get or a look again reads it again, never dirty, Save refused; DirLook terminal keeps ls in a terminal Co-Authored-By: Claude Opus 5.5 <[email protected]>
* One Look path: Enter, Tab and a bare Look take what a click at the cursor ↵Gabriel Schneider10 hours
| | | | | | | | | | | | | | | | | takes, a diff line's address included, and an event reader is told of them as of a click The keyboard expanded the cursor's word on its own (look.expandedSel), so a diff line's address (and a hunk line's code word, without its +/-) was the mouse's alone: Enter on `+line` looked for the text in the diff. Now exec.operandAt is the one expansion: pointerOperand is it with a gesture's selection borrowed, the Enter/Tab path and a bare Look (exec.currentOperand) are it from the cursor, and both dispatch through mouse.dispatchPointerBuiltin, so a pane with an event reader hears a key's look or exec as a click's. A test runs one diff line and one file:12:5: line through a B3 click, a B3 sweep, Enter, a bare Look, the look file and an event write-back, and asserts each lands in the same file, line and column. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A bare Save on a +-named pane that is no output (+Tutor) asks for a path, as ↵Gabriel Schneider16 hours
| | | | | | +New's does, never writing a file named +Tutor Co-Authored-By: Claude Opus 5.5 <[email protected]>
* `answer z` quotes `z`, a bare `name` says it names nothing, and `Repl ↵Gabriel Schneider17 hours
| | | | | | | | | | | | | klingon` is invalid (EINVAL), its message citing no doc path A refused answer quoted the word `answer`, not the choice refused. A `name` with nothing after it was an unknown control message. A Repl of no such language failed EIO with a pointer into the reference; it now says `invalid language` (EINVAL, here and through a mount) and how many more there are. A builtin's failure that says invalid anywhere is EINVAL, as 9ns reads it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Mount dials: a relative socket path is a bad dial address, a socket path not ↵Gabriel Schneider17 hours
| | | | | | | | | | there says no such socket (ENOENT), and the hint says tcp! takes a numeric address `Mount peer rel/x.sock` dialled relative to wherever the editor ran; `Mount peer unix!/nonexistent` said `dial failed: no answer` (EIO); and the hint offered `tcp!host!port` where only a numeric address is taken. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Grep's miss says `Grep: text not found`: it is a literal search, and ↵Gabriel Schneider17 hours
| | | | | | | | | "pattern" suggested a regular expression Still ENOENT through a mount ("not found" is in 9ns's table, and the unit tests' errno-words check holds it so). The guide's quote follows. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Petscii, Palette, Ascii, PdfFit and PdfTint take the state their tag word ↵Gabriel Schneider20 hours
| | | | | | | | | | | | | names, set rather than flipped: `Petscii on`, `Palette terminal`, `PdfFit width` Each could only flip, so a script had to read the tag to know which way a write would go. Each now takes an optional argument, the value its tag word shows (on|off for Petscii and Ascii, commodore|terminal for Palette, width|height for PdfFit, disabled|filtered|full for PdfTint), and sets it; bare, it flips as before. Anything else is refused with what it takes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Restore and ThemeFile failures say why in words, a ZON one with its line: ↵Gabriel Schneider22 hours
| | | | | | | | | | | | | | never FileTooLarge, ParseZon or a bare `parse zon` Restore read failures named the Zig error (FileTooLarge, NotAFile, ReadFailed), a file that is no dump said `not a pardes dump (ParseZon)`, and a ThemeFile that did not parse said `parse zon`. Messages.errorWords says an error in words (the few that read badly spelled out plainly, the rest spaced and lower case, as reportError did), and zonWhy gives the parser's first error with its line: `not a pardes dump: line 1: expected ...`, `theme file x.zon: line 3: ...`. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A terminal's kitty graphics draw as glyph art where pixels cannot, and by ↵Gabriel Schneider26 hours
| | | | | | | | | | | | | | | | | | | | choice: Petscii on the pane, TermImages for new ones Under an outer terminal without kitty graphics a tty pardes cannot pass a terminal pane's images on, so it draws them itself as an image pane's Petscii does: each row of an image is matched to C64-palette glyph art over the cells it covers (GlyphArt.renderRect, the exact-grid half of GlyphArt.render), cached while it is on screen. yazi is still told the kitty protocol works, so it keeps sending its previews. The same art is a choice anywhere: the Petscii builtin now takes a terminal pane too (PaneKind.picture), flipping its images between pixels and glyphs, and a terminal holding images, or drawing them as glyphs by choice, says petscii:on|off in its tag as an image pane does. TermImages real|petscii (default real) is what a new terminal starts with; it is in DumpConfig, /ctl and the reference. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The reference is fs.md's per-file semantics, errors and limits in Typst, ↵Gabriel Schneider27 hours
| | | | | | with the settings table, and says what the pane ctl's Left, Right, Up and Down do Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Mount with no dial is wrong #args, and a dial that is no address says bad ↵Gabriel Schneider27 hours
| | | | | | | | | | | | dial address, both EINVAL Mount name alone failed "Mount name dial: missing argument" and a malformed dial "Mount: bad dial", both EIO, though each is a malformed request. They now say wrong #args and bad dial address (with the forms a dial takes), and a builtin failure in those words answers EINVAL, as 9ns reads them. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Attach in a detached session is refused with words: bare is wrong #args, a ↵Gabriel Schneider27 hours
| | | | | | | | | | | | | name no session has is "no such session" A detached session's core has no frontend loop to take an Attach, so the word was asked and never answered: a ctl write of it succeeded and nothing happened. The core now knows it is a detached session's, and Attach there says why: bare names no session but itself, a name with no session behind it is said so, and one that is a session is told to be attached from a frontend. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* An edit that changes nothing, an empty range deleted or a range replaced by ↵Gabriel Schneider27 hours
| | | | | | | | | | | what it holds, makes no undo step A shell's : > data on an empty address, echo abc > data over abc, or Edit s/d/d/ each pushed an undo step and a new revision, so Undo spent a press on nothing and the pane read as edited. The splice of the 9P writes and the Edit builtin now see the text is unchanged and stop. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A builtin for one kind of pane is refused on another with why: Petscii, ↵Gabriel Schneider27 hours
| | | | | | | | | | | | | Palette, Ascii, Filter, Togglettymode, the Pdf words, Mode and TreeContext Each of these did nothing, silently, on the wrong kind of pane, so a ctl or exec write of Palette to a text file answered ok as if it had acted. A builtin now declares the one kind it is for (needs), the registry reads it, and runBuiltinFrom refuses the rest before dispatch, as Repl and Edit already refused theirs. Mode and TreeContext, which take more than one kind, say their own refusal. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Save and Save path on a PDF or image pane are refused, "a PDF pane has no ↵Gabriel Schneider27 hours
| | | | | | | | | | | | text to save", never a silent success A bare Save on a PDF or an image did nothing, and `Save path` returned without writing, both answered as done. Such a pane shows a file it does not hold as text, so there is nothing of its own to write. Save now refuses it with why ("Save: a PDF pane has no text to save", or an image pane's), and so fails the write that asked. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Joincol is refused, as Newcol is, when the joined column cannot give each ↵Gabriel Schneider27 hours
| | | | | | | | | | | | | | | pane its tag and 2 rows Joincol moved every pane of the keyboard's column into the next one whether they fit or not. Two columns of two panes in a 12-row window became one column of four, wanting 12 rows where 10 were free, a layout that `size` then refused as it stood. Joincol now tries the join in place first (layout.joinFits: the panes and width moved, minimaFit asked, everything put back, nothing dropped or logged). A join that does not fit is refused, "Joincol: no space: the joined column cannot give each pane its tag and 2 rows". Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A Restore logs and names the whole path of the dump it reads, not the name ↵Gabriel Schneider27 hours
| | | | | | | | | | | | | as typed `Restore x.dump.zon` read the DumpDir's x.dump.zon but logged `restore x.dump.zon`, and `~/d.zon` logged the tilde. A follower could not tell which file was restored. The builtin now resolves the name once (fs.restorePath: `~` expanded, a relative name the DumpDir's when one is there, else the current directory's) and hands that path to the host, which reads it and logs `restore <path>`. Its messages name it too. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A path typed with a leading ~ is the home directory, at every entry point ↵Gabriel Schneider27 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | | | that takes one, through one helper Only DumpDir (dump.zig) and ShaderBuild expanded `~/`, each its own way. So a look at `~/notes.txt`, `name ~/x`, `Save ~/x`, ThemeFile, Restore and a quoted `pardes '~/x'` all took `~` as a directory of that name under the pane's. There is now one rule, filesystem.expandHome. A leading `~`, alone or before `/` or `:`, is $HOME, else the passwd entry's home; `~user` is that user's (getpwnam). As in a shell, it applies even beside a file named `~`, and `./~` names that file. Every entry point runs its typed path through it: - look, B3 and 9P, before any parsing, so `~/x:12`, `~/x:12:3` and `~/x:/re/` all work; - name, and a tag's rename; - Save <path>; - ThemeFile, DumpDir, Restore and ShaderBuild's shader files; - the forwarding launch. Recent rows are not shown with `~` and need nothing. How names are shown is unchanged. Tests: expandHome's cases, and HOME unset (passwd), with HOME passed in rather than set, since setenv moves the environ a spawned child reads. fs.py covers Save into missing directories under `~`, `name ~/x`, a look at `~/x:3`, and a forwarded `pardes '~/x'`. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Kill with a name and nothing running says "Kill: nothing running" and ↵Gabriel Schneider27 hours
| | | | | | | | | | | | | | succeeds, as bare Kill does Bare `Kill` with nothing running is a message, not a failure: a script's Kill has nothing left to do. `Kill make` in the same state failed the write with "no running command has that first word", as though make were the mistake. With nothing running at all, named or not, Kill is now the message. It still fails when commands run but none has the word. The two tests that used `Kill zzz` as a builtin that always fails now use `Unmount zzz`. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Save makes the directories its file goes in, always: for the pane's own name ↵Gabriel Schneider27 hours
| | | | | | | | | | | | | | | | and Save path alike Whether a Save made missing directories depended on how the name had come about. Config's pane did, a name written into a missing directory did (since kkrqxtsp), and `Save path` and every other name did not, failing ENOENT instead. There is now one rule: a Save makes the parent directories of the file it writes, a pane's own or a terminal's scrollback included, and the make_dirs flag is gone. A directory it cannot make still fails the write with why, as fs.py's /nonexistent-pardes-dir case shows. fs.py now also saves into missing directories by Save path and by a written name. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* DumpConfig prints each setting as the ctl word that sets it, reads ↵Gabriel Schneider27 hours
| | | | | | | | | | | | | | | | | | | | | | | | | unsupported for one the frontend lacks, and includes LocationsConfig The report meant to be feedable back as configuration, but several lines were not. Shell and Font each took three to six lines of "requested", "effective" and "pending". The transition read "Panel transition PanelSlide", with no Panel word. WindowOpacity and TaglineSize carried "(pending)" and "(build-time only)". A GUI-only toggle such as Ligatures was left out on the tty, and LocationsConfig was missing altogether. Now every line up to a blank one is a word and its value: - Shell <path>; - Font <name>:<size>; - one on/off line for each Panel word; - `unsupported` for a setting this frontend does not have; - LocationsConfig as it would be typed. After the blank line comes what is in effect but set by no word, phrased so that none of it starts with a ctl word. The test checks that each line before the blank one starts with a setting word. The GUI scripts that read the font lines (font_size.py, appearance_gallery.py) now read the new ones. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Config opens the startup file, DumpConfig the settings report, and the ↵Gabriel Schneider27 hours
| | | | | | | | | | | | | | | | | | | | | | | | | | workspace tag reads Dump Themes Config Debug Exit Config (SPC f c) opens init, found as the settings report finds it (opts.startup_config_path: $XDG_CONFIG_HOME/pardes/init or ~/.config/pardes/init, and the macOS and Windows paths config.md gives). A pane that already holds it is gone to instead; a file on disk is looked at; with none, an empty pane is named for it, and Save makes its directory and any above it first (File.make_dirs, fs.makeDirs) before writing. Without a configuration directory it says so and opens nothing. The report Config used to open, the startup path and every live setting, is DumpConfig, in a +DumpConfig pane. No alias keeps the old meaning. The workspace tag's default words put Themes where NextColor was, NextColor staying a builtin, and Config beside it. A tag the user edited is kept as it was: a dump stores only an edited one (topbar_custom), and a restore puts back only that. theme.snap types NextColor onto the workspace tag to click it, and tagnav's walk back to Dump takes five long-word steps. The rest of the re-recorded goldens differ in the workspace words and their widths only. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Terminal.zig is terminal.zig: a file of functions and no fields takes a ↵Gabriel Schneider27 hours
| | | | | | | | namespace's lowercase name The last of the deferred renames, now that the tty and theme agents have landed: panes.terminal at its importers, the alias lines in Text.zig and File.zig and panes.zig's own uses following. dump.zig's Terminal struct, a dump record, is not this. The served sources list and docs/design.typ name the new file. test/perf.zig's references change, so the three perf baselines take its new harness id with their numbers as recorded. No behaviour changes. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Mini.zig is mini.zig: a file of functions and no fields takes a namespace's ↵Gabriel Schneider27 hours
| | | | | | | | lowercase name The naming the split agreed on, deferred until now; panes.mini is its name at its importers. File.zig keeps its alias line (const Mini = panes.mini) so the file another agent is working in changes by that line alone. The served sources list and docs/design.typ name the new file. No behaviour changes; test/perf.zig's two references change, and since the perf harness is keyed by its own text, its three baselines are recorded again (under other agents' builds, so a little slower). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A 9P error past 128 bytes keeps its reason: the path in it gives up its ↵Gabriel Schneider27 hours
| | | | | | | | middle to … An Rerror carries 128 bytes (Plan 9's ERRMAX) and the engine cut longer text there, and a builtin's failure was first clipped between words to 256 with ...: either way the end, which says why, was what went. tree.handle now fits a long reason by cutting the middle of its longest path, else of the whole text, on a character boundary, and reportFailure fills its buffer the same way. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A refused Delcol changes nothing: no +Unsaved opens, no focus movesGabriel Schneider27 hours
| | | | | | Delcol's refusal opened +Unsaved, placing a pane in the layout it was refusing to change. Its unsaved records and notice say which panes; the list pane is left to the refusals of the other words. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Mini with no argument is wrong #args, EINVAL; Find, Grep and Mini say their ↵Gabriel Schneider27 hours
| | | | | | | | names capitalised Mini needs a file but did not say so, so a bare Mini ran and failed EIO. It now requires its argument, refused wrong #args (EINVAL) as every such word is. Its failures, Find's and Grep's start with the builtin's own name (Mini:, Find:, Grep:), as the others' do. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Every catch unreachable, orelse unreachable and syscall assert outside tests ↵Gabriel Schneider27 hours
| | | | | | | | is a real refusal or says why it cannot fire A sweep for round 23's crash: a run's answer (pty/run) was bufPrint'd into 48 bytes with catch unreachable, so a foreground program's long name (macOS gives up to 32 bytes) panicked; it now cuts at the room, keeping its newline, in 96 bytes. The rest were numbers into buffers sized for them, a braille codepoint, pthread calls on the queue's own mutex, and pdf_view's resolved outline entries: each now carries a one-line comment saying why it cannot fire. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Not-found failures say it once, in plain words: grep: pattern not found, ↵Gabriel Schneider27 hours
| | | | | | | | callers not found The ENOENT that 9ns reads from a failure's words came from a tacked-on suffix, grep: no match, not found, definition: nothing found, not found, no shell "x", not found. They now say it once: grep: pattern not found, find: name not found, Callers: callers not found, definition: not found, shell "x" not found (...). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A ThemeFile that cannot be read or is no theme fails its write, and a bad ↵Gabriel Schneider27 hours
| | | | | | | | path says why The theme is read when the host performs the request, after the write had been answered, so a missing file or a bad theme only showed a message; and a path not ending .zon said only invalid theme path. Load failures are now the waiting write's (late, as a Save's), and the path refusal says a theme file is a .zon. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A buffer whose file was deleted on disk is dirty, and Del asks firstGabriel Schneider27 hours
| | | | | | A file deleted under an open buffer left dirty 0 and let Del, Exit and the rest throw the only copy of its text away unasked. It now counts as dirty, as acme's does, and the refusals ask about it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A builtin or setting this build lacks is refused GUI-only, from an exec tooGabriel Schneider27 hours
| | | | | | On a terminal, Fonts written to an exec was no builtin there, so it ran as a shell command and ended exit 127; ctl said unknown control message. Both now say Fonts is GUI-only, invalid here (a builtin another platform's build has, not in this build). Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A refusal over unsaved panes keeps its list in +Unsaved and shows a short noticeGabriel Schneider27 hours
| | | | | | | | | | | Exit's refusal (and Restore's, Del's, Delcol's, get's) put its full text on a notice that went: a long list of names, gone before it was read. The list now goes into one +Unsaved pane, filled again by each refusal, a row a pane (`<name>: Modified`) and the `Exit again to discard` line; the notice is short, `3 unsaved panes — Exit again to discard`. The 9P `unsaved` records and the write's err are as they were. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* ThemeSel is Themes and FontSel is Fonts; the old words still work in init ↵Gabriel Schneider27 hours
| | | | | | | | | | | | files and dumps The user asked for the plainer words. Every use is renamed: the builtins, leader paths, /commands, the docs and tutor, tests, and the themesel golden, re-recorded. An init file's ThemeSel or FontSel runs the new word and says `ThemeSel: renamed to Themes`, as ColumnTags is said; a dump naming an output pane by the old word restores it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Recent lists the files opened lately, closed ones too, and a jump back to a ↵Gabriel Schneider27 hours
| | | | | | | | | | | | | | | | closed file reopens it A file closed by accident, its path forgotten, could not be found again: the jumplist dropped closed panes. Every file opened (a look, a Save of a scratch, a Restore, a rename) goes first in a list of 200, kept once, its dot noted when it closes, kept across sessions in $XDG_STATE_HOME/pardes/ recent. `Recent` (SPC f r) shows it in a reused +Recent, each row `path:line:col open|closed` a look reopens; /recent reads `open|closed <path>`. The jumplist keeps a closed file's entries, +Jumps marks them `(closed)`, and Back to one opens the file at its place. acme has no such thing; its dump and Load are the nearest. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A tag write refuses NUL and the other control characters; a Dump that fails ↵Gabriel Schneider27 hours
| | | | | | | | | | | | says so A NUL written into a tag went into the dump, which the host then could not write, and Dump said nothing: a success that wrote nothing. Tag writes, the workspace's, a column's and a pane's, refuse control characters but tab and newline, DEL, C1 and bytes not UTF-8, EINVAL; and Dump reports any failure of its own instead of swallowing it. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Grep and Find count the rows they found, so a hit opens its +Search and a ↵Gabriel Schneider27 hours
| | | | | | | | | | | | miss fails Round 18 made a search that found nothing fail, but grep and find never counted their rows (only a pane search did), so every Grep read as a miss. Both count the lines they wrote now; a Find or Grep that finds nothing fails alike, `find: no match, not found` / `grep: ...`, ENOENT, and opens no empty +Search. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* The docs: data writes replace their range, restored command panes show their ↵Gabriel Schneider27 hours
| | | | | | | | | | | | | | exit, the tag's default words, empty matches at #0, errors' fallback, tagexec and event readers, Find finds names Dogfood round 18 found these false: `>>` on data replaces the addressed range (acme's data write deletes then inserts); a restored command pane shows the `exit N` it ended with; the default tag words are `Save Tty Collapse Del`; `file:0/^/` passes over the empty match at #0; `errors` with no room logs msg records; a pane's tagexec never goes to an event reader; a scratch is named with `(pane N)` in a refusal; and /commands said Find searched the pane, where it finds file names. Co-Authored-By: Claude Opus 5.5 <[email protected]>
* A builtin failure over something not there answers ENOENT: Unmount of a name ↵Gabriel Schneider27 hours
| | | | | | | | | | not mounted `Unmount nothere` failed EIO with `not mounted`. It says `no such mount nothere` now, and a builtin's failure that says `no such` (this, Tty's `no such directory`) answers ENOENT, the errno 9ns reads from those words. Co-Authored-By: Claude Opus 5.5 <[email protected]>
generated by cgit v1.3 (git 2.53.0) at 2026-10-02 06:08:44 +0000