| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`-Dplatform=p4 -Dtarget=riscv32-freestanding` emits a single freestanding OBJECT
exporting a seven-function C ABI, not an executable. The board's toolchain
(../05-zig-p4) owns `_start`, the linker script and the UART driver and links this
in. The seam is bytes rather than types, so neither side can accidentally depend
on the other's internals, and a signature that drifts fails at link time.
The serial line is the whole of the I/O. `src/p4.zig` drives vaxis unchanged over
it: the renderer is a byte writer and `queryTerminalSend` is a byte writer, so the
terminal emulator on the host answers the capability handshake and the firmware
sees a real terminal. Measured going out over the wire on attach: alt screen,
in-band resize, cursor report, kitty keyboard, kitty graphics, DA1.
THREE WORDS EXIST ONLY HERE. `src/board_memory.zig` implements `Peek`, `Poke` and
`Hexdump`, gated on `builtin.os.tag == .freestanding and !isWasm()` - derived from
the TARGET, because they are a property of running with no OS under you rather
than a product option, and because wasm is freestanding too and is exactly what
must be excluded: in a browser an address is an offset into the linear memory this
editor's own heap lives in. Every access goes through `*allowzero volatile`: a
peripheral register is not memory, and address 0 is an ordinary unmapped address
on this bus. One 4 KiB cap per command, set by the console rather than the memory -
an unbounded dump would wedge the only console the board has for eleven hours.
Measured on ESP32-P4 rev v1.3 silicon, driven from a host terminal:
Peek 0x501101a4 0x0e63ce71, then 0xaeaa6919 on a second read - the
RNG register, so the volatile loads are not folded
Poke 0x5011002c 0xdeadbeef LP_STORE0; a later Peek returned 0xdeadbeef
Hexdump 0x5011002c 32 16 bytes a row, hex columns and an ASCII gutter
Peek 0x50110001 `peek: MisalignedAddress` on the message row
That last line is the one that matters. A misaligned 32-bit access traps, and a
trap in firmware is a watchdog reset that takes the session with it, so the check
that turns it into a message is the reason the file is hand-written rather than a
generic reader.
BARE METAL BOOTS AN EMPTY OUTPUT BUFFER. Every other boot layout in `init` makes a
shell, and on this platform that is not a preference but an impossibility: nothing
to fork, no pty to give a terminal pane. Booting one anyway produced precisely what
that describes - a pane whose tag ends in `Filter`, no gutter, no buffer, and every
keystroke vanishing into the Fallback's silent pty. An output buffer is also what
the platform's own words want, since Peek, Poke and Hexdump each fill one.
Sized for the board rather than for a desktop:
* `allocators.zig` gains a p4 tier that is ALL fallback - every capacity is zero,
so each arena spills immediately to the 384 KiB heap the firmware hands over,
and no megabyte-shaped static reservation lands in `.bss`.
* `source_manifest.zig`'s allowlist is EMPTY on p4. The table is ~0.95 MiB of
rodata against a 1.5 MiB flash partition; the firmware's filesystem is the
serial host's, through the Host vtable.
* The grid is clamped and the clamp is measured, not guessed: every cell is paid
for four times (vaxis Screen + InternalScreen, pardes Surface + previous_cells),
so 40x12 fits and 80x24 exhausts the heap during `Pardes.init`.
* `Vaxis.resize` deinits both screens before allocating replacements, so a failed
resize leaves vaxis rendering nothing. The p4 shell keeps the previous geometry
on failure instead of leaving a half-applied one.
Also here: `output_pane_integration_test.zig` had an exhaustive switch over
`Platform` that adding `.p4` left unhandled, which broke `zig build unit-test`
outright - the native test binary is the one consumer no platform build compiles.
346 tests pass again.
|
| |
|
|
| |
optional methods
|
| |
|
|
| |
+ snapshot refresh
|
| |
|
|
| |
snapshots
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Three changes that all turned out to be the same shape -- a feature that
worked in one direction, or for one pane kind, and quietly did not in the
others.
CLIPBOARD. Every register write emitted set_clipboard, so deleting one
character threw away whatever the desktop was holding; multi-cursor yank took
the join's early return and emitted nothing at all, so the same key reached
the clipboard on one cursor and not on two. Nothing could READ the clipboard:
the SDL shell had no SDL_GetClipboardText anywhere in it, and the tty shell
never asked for OSC 52, so `p` from another application was dead in both.
Now it is helix's split. y/d/c/p/P/R and the acme chords are the DEFAULT
REGISTER and nothing else; the system clipboard is five words on helix's own
letters -- SPC y, SPC Y, SPC p, SPC P, SPC R -- spelled as builtins so they
land in Help and are executable like every other verb. The one exception is
the tag `y` chord, which still mirrors out because a tag is always insert, so
SPC cannot be pressed there, and copying the path out is the whole point of
the chord.
Reading is a new read_clipboard effect answered by an ordinary Event.paste, so
the round trip is honest about being one: SDL and NSPasteboard answer inside
the same drain, the browser answers a promise, and a terminal answers over
OSC 52 or -- far more often -- refuses. A refused read is a paste that does
not happen, and the request dies at the next keystroke rather than landing
minutes late in whatever pane is focused by then.
The tty shell also enables BRACKETED PASTE now and coalesces
paste_start..paste_end into one event. Before this a paste arrived as a flood
of individual key presses: plausible in insert mode, and in normal mode every
pasted character ran as a command.
n/N. They stepped the armed results buffer and immediately Looked each row, so
you could not walk past a hit without opening it. They are a MOTION now:
select the next look-able text, open nothing, and let Enter decide. What they
step is the largest whitespace-delimited run look.resolve can act on
(look.lookableSpan, wrapper punctuation peeled), over a RING of panes -- every
pane that has performed a look, most recent first, then the output buffers
that have not, newest first, and only if both are empty the pane in front of
you. N is the exact inverse of n, computed rather than remembered: both
directions ask the same question about the same spans and compare against the
column the walk parks on, so x presses one way and x back land exactly where
you started, pane boundaries and the ring's seam included.
A ring rather than a list with two ends because a shell's cursor sits at the
prompt, below everything it has printed, so a walk that could not come round
would have nowhere to go on the very first press -- which is the case n/N were
written for.
One motion everywhere, no pane-kind or buffer-kind special case. The only
thing a buffer may change is the GRAIN of what a step selects, and it does it
with one flag rather than a branch: output_pane.Traits.commands (renamed from
`executes`, which named one reader's behaviour rather than the fact) makes a
row select WHOLE, because a ThemeSel line is a word to run and has no path
inside it to pick out. `]d`/`[d` are not n/N -- they are helix's diagnostic
motions, their job is to ARRIVE, and they still reach searchStep.
THE TTY PROMPT. Leaving raw tty blanked the prompt row, and the command you
had typed at that prompt shares the row, so it went too -- a shell out of tty
read as output only. OSC 133 marks the row CELL by cell, so the two are
separable: config.tty_blank = .prompt cuts the prompt's own columns and leaves
the command, left-hugged at column 0 in line with the output under it rather
than in a bay of blanks. .prompt_and_input is the old behaviour, kept.
Because the row is now something you can put a cursor in, enterTty adds the
hidden prompt width back before asking ghostty to walk the shell's own cursor
to it -- the modal column on a cut row is short by exactly that much.
Verified: unit-test 186/186 (nine new), snap 87/87 (new ttyprompt.snap),
hxdiff 481 and hxparity 561 with 0 mismatches, tty and gui both build. And
against the real binaries rather than the harness: in a pty, SPC y emits OSC
52 carrying exactly the selection while plain y emits nothing, SPC p issues
the read and pastes the reply, and a bracketed paste of "dd..." inserts text
instead of deleting two lines. In a real SDL window, SPC y then SPC p round
trips through the system clipboard while the default register holds different
text. Setting tty_blank back to .prompt_and_input reproduces all 86 old
goldens byte for byte.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adds -Dplatform=macos, a fourth backend beside tty, gui and web. Zig keeps the
core, the ptys, every effect and the worker threads; Swift owns NSApplication,
the window, input translation, and drawing the cell grid with CoreText. They
meet at a hand-written C ABI in src/macos/pardes.h, built as a static library
the app links.
The ABI is src/web.zig's boundary with the wasm removed, because both hosts are
the same animal: someone else owns the clock, feeds events in through flat
functions, and reads one packed cell buffer out. The browser proved the shape.
The one divergence is that the browser has no processes and forwards every
effect to JavaScript, whereas forkpty is right here, so src/macos.zig performs
them — spawn, write, resize_pty, save_file, new_file, write_dump, open_link,
set_clipboard. lsp, pipe and watch are answered with nothing and marked; the
core already tolerates that, since the browser answers none of them either.
This deliberately inverts ghostty's split, which was studied first and is
written up in docs/ghostty-macos-notes.md. Ghostty hands Zig a bare NSView*,
installs its own CALayer and owns the frame clock; Swift never renders. Pardes
does the opposite because its frame is already a cell grid and CoreText draws
one natively — the alternative is a second hand-rolled glyph atlas, which is
what most of gui.zig's 4,300 lines already are. It would also have been written
blind: the Swift half cannot be compiled here.
What makes the scaffold verifiable rather than dead code is that the Zig half is
ordinary POSIX and builds and tests on Linux. Borrowing ghostty's best trick,
build.zig translate-C's the header into the test build and src/macos.zig asserts
every constant, struct layout, and exported function's arity and widths against
it. That guard earned its place immediately: pardes_scroll grew a cell
coordinate after the Swift view had been written against the older form.
Skipped, and named as the upgrade path in docs/macos.md: the Xcode project,
xcframework, lipo and codesigning ghostty needs. All four exist for
distribution; a dev build is a swiftc invocation and a directory with a plist.
The Swift app is a scaffold and says so — every uncertain API spelling carries
an UNVERIFIED marker, and no part of it has been compiled.
tty is unaffected: 75/75 snapshot scripts and both unit suites pass.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
file:LINE:COL-ENDLINE:ENDCOL, with the two short forms people actually type
reading naturally: file:412:9-21 on one line, file:412-418 whole ones. Ends are
inclusive. A path feature, not a search feature — a ranged path typed in a tag
or middle-clicked out of a shell's output selects just the same; search is only
its first consumer.
The dash is the fussy part. `-` was already a file char, so a ranged word
survives click expansion whole, but a range needs a number on BOTH sides or
my-file:10, build-2 and 2026-07-30 would stop being paths. Table-driven test in
look.zig for exactly that.
Selecting goes through the cellRange/setPaneRange pair the multi-cursor work
left, and hxOff clamps both ends, so a stale range selects what still exists
rather than crashing or reaching past EOF — pinned with an 8:6-400:9 range in a
nine-line file.
Producers: / search, Grep, and five LSP sites through a new spanRow — goto,
references, rename tokens and both symbol lists were throwing away real
protocol ranges at path:line:col. Left alone deliberately: Find rows are bare
paths with nothing to span, a jump is a spot not a span, and the diagnostic and
format paths only ever have a point, where half a range would be worse than
none.
One knock-on worth knowing: n now leaves an EXPLICIT selection, so a topbar
execute chords it. grep.snap's no-match step was silently becoming
`Grep TARGET`; it runs from the leader path now, which never chords, and the
dedicated chord steps stayed where they were.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Retargeting a key, a mouse chord or a spelling is now an edit to src/config.zig
and nothing else. Three parts in reading order: pardes's own bindings (where a
reader lands), the Look/Exec syntax, then the helix keymap under a banner
saying hxdiff/hxparity are differential suites against real helix, so a key
moved there is a divergence and not a tweak.
The bindings are data a comptime loop can walk, because the builtin index is
going to walk them.
Duplication this cut: is/isC/isA became one hit(key, chords) over ~132 call
sites, and a binding being a LIST collapses the letter-or-arrow chains;
swap_enter_tab is gone, replaced by look_key/exec_key that can point anywhere;
the four focus builtins' h/j/k/l lived hardcoded in two places and is now one
table.
No golden moved.
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
Save moves w -> f s to free the w group for window navigation.
|
| | |
|
| |
|
|
| |
web snapshot tooling
|
| |
|
|
| |
raw std.os.linux.* call sites converted with the errno-convention flip (libc returns -1 + thread-local errno, not -errno): open/close/read/write/rename in tty.zig, gui.zig, look.zig; harness too (snapshot.zig: getcwd/mkdir/chdir/fork+waitpid/getdents64->opendir-readdir, e2e_harness.zig: clock_gettime/write/close), so the parity suite itself is POSIX-portable. Per-OS branches kept only where platforms genuinely diverge: shellCwd in look.zig (linux /proc/<pid>/cwd readlink; darwin libproc proc_pidinfo PROC_PIDVNODEPATHINFO with a hand-declared extern; other POSIX degrades to null), bash path (/usr/bin/bash on linux, /bin/bash elsewhere), TIOCSWINSZ constant (absent from std.c.T on darwin). forkpty/execv/chdir externs were already libc and are portable (fork-safety preserved: absolute-path execv, no malloc between fork and exec, initial spawns before worker threads). build.zig: forward target/optimize to the ghostty dep for native/cross (web keeps its no-target fetch), disable ghostty simd for darwin cross-builds (apple_sdk needs xcrun; scalar fallback = web config), link libutil on the BSDs. Pinned ghostty needs two one-line zig-0.16 darwin fixes, applied in the zig-pkg cache and documented in build.zig. Verified: aarch64-macos + x86_64-macos + x86_64-freebsd cross-compiles green; linux native tty + gui + web green; snapshot suite 18/18 with goldens untouched. Out of scope: gui-on-macos needs Metal shaders (SDL GPU rejects our SPIR-V there).
|
|
|
test/ (snapshot parity harness + 18 frozen goldens). One sans-IO core, vaxis tty + SDL3 GPU native + wasm web shells, 18/18 parity with the purged prototype, 7.6k lines vs 12.1k. Fix: gui shell pre-sized the core at init so the greet-releasing resize never fired (blank panes until first interaction); live sessions now init at defaults and get the real grid as a resize event (the shell contract, documented on Options).
|
