| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`-Dplatform=p4 -Dtarget=riscv32-freestanding` emits a single freestanding OBJECT
exporting a seven-function C ABI, not an executable. The board's toolchain
(../05-zig-p4) owns `_start`, the linker script and the UART driver and links this
in. The seam is bytes rather than types, so neither side can accidentally depend
on the other's internals, and a signature that drifts fails at link time.
The serial line is the whole of the I/O. `src/p4.zig` drives vaxis unchanged over
it: the renderer is a byte writer and `queryTerminalSend` is a byte writer, so the
terminal emulator on the host answers the capability handshake and the firmware
sees a real terminal. Measured going out over the wire on attach: alt screen,
in-band resize, cursor report, kitty keyboard, kitty graphics, DA1.
THREE WORDS EXIST ONLY HERE. `src/board_memory.zig` implements `Peek`, `Poke` and
`Hexdump`, gated on `builtin.os.tag == .freestanding and !isWasm()` - derived from
the TARGET, because they are a property of running with no OS under you rather
than a product option, and because wasm is freestanding too and is exactly what
must be excluded: in a browser an address is an offset into the linear memory this
editor's own heap lives in. Every access goes through `*allowzero volatile`: a
peripheral register is not memory, and address 0 is an ordinary unmapped address
on this bus. One 4 KiB cap per command, set by the console rather than the memory -
an unbounded dump would wedge the only console the board has for eleven hours.
Measured on ESP32-P4 rev v1.3 silicon, driven from a host terminal:
Peek 0x501101a4 0x0e63ce71, then 0xaeaa6919 on a second read - the
RNG register, so the volatile loads are not folded
Poke 0x5011002c 0xdeadbeef LP_STORE0; a later Peek returned 0xdeadbeef
Hexdump 0x5011002c 32 16 bytes a row, hex columns and an ASCII gutter
Peek 0x50110001 `peek: MisalignedAddress` on the message row
That last line is the one that matters. A misaligned 32-bit access traps, and a
trap in firmware is a watchdog reset that takes the session with it, so the check
that turns it into a message is the reason the file is hand-written rather than a
generic reader.
BARE METAL BOOTS AN EMPTY OUTPUT BUFFER. Every other boot layout in `init` makes a
shell, and on this platform that is not a preference but an impossibility: nothing
to fork, no pty to give a terminal pane. Booting one anyway produced precisely what
that describes - a pane whose tag ends in `Filter`, no gutter, no buffer, and every
keystroke vanishing into the Fallback's silent pty. An output buffer is also what
the platform's own words want, since Peek, Poke and Hexdump each fill one.
Sized for the board rather than for a desktop:
* `allocators.zig` gains a p4 tier that is ALL fallback - every capacity is zero,
so each arena spills immediately to the 384 KiB heap the firmware hands over,
and no megabyte-shaped static reservation lands in `.bss`.
* `source_manifest.zig`'s allowlist is EMPTY on p4. The table is ~0.95 MiB of
rodata against a 1.5 MiB flash partition; the firmware's filesystem is the
serial host's, through the Host vtable.
* The grid is clamped and the clamp is measured, not guessed: every cell is paid
for four times (vaxis Screen + InternalScreen, pardes Surface + previous_cells),
so 40x12 fits and 80x24 exhausts the heap during `Pardes.init`.
* `Vaxis.resize` deinits both screens before allocating replacements, so a failed
resize leaves vaxis rendering nothing. The p4 shell keeps the previous geometry
on failure instead of leaving a half-applied one.
Also here: `output_pane_integration_test.zig` had an exhaustive switch over
`Platform` that adding `.p4` left unhandled, which broke `zig build unit-test`
outright - the native test binary is the one consumer no platform build compiles.
346 tests pass again.
|
| |
|
|
| |
optional methods
|
| | |
|
| |
|
|
| |
+ snapshot refresh
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Three changes that all turned out to be the same shape -- a feature that
worked in one direction, or for one pane kind, and quietly did not in the
others.
CLIPBOARD. Every register write emitted set_clipboard, so deleting one
character threw away whatever the desktop was holding; multi-cursor yank took
the join's early return and emitted nothing at all, so the same key reached
the clipboard on one cursor and not on two. Nothing could READ the clipboard:
the SDL shell had no SDL_GetClipboardText anywhere in it, and the tty shell
never asked for OSC 52, so `p` from another application was dead in both.
Now it is helix's split. y/d/c/p/P/R and the acme chords are the DEFAULT
REGISTER and nothing else; the system clipboard is five words on helix's own
letters -- SPC y, SPC Y, SPC p, SPC P, SPC R -- spelled as builtins so they
land in Help and are executable like every other verb. The one exception is
the tag `y` chord, which still mirrors out because a tag is always insert, so
SPC cannot be pressed there, and copying the path out is the whole point of
the chord.
Reading is a new read_clipboard effect answered by an ordinary Event.paste, so
the round trip is honest about being one: SDL and NSPasteboard answer inside
the same drain, the browser answers a promise, and a terminal answers over
OSC 52 or -- far more often -- refuses. A refused read is a paste that does
not happen, and the request dies at the next keystroke rather than landing
minutes late in whatever pane is focused by then.
The tty shell also enables BRACKETED PASTE now and coalesces
paste_start..paste_end into one event. Before this a paste arrived as a flood
of individual key presses: plausible in insert mode, and in normal mode every
pasted character ran as a command.
n/N. They stepped the armed results buffer and immediately Looked each row, so
you could not walk past a hit without opening it. They are a MOTION now:
select the next look-able text, open nothing, and let Enter decide. What they
step is the largest whitespace-delimited run look.resolve can act on
(look.lookableSpan, wrapper punctuation peeled), over a RING of panes -- every
pane that has performed a look, most recent first, then the output buffers
that have not, newest first, and only if both are empty the pane in front of
you. N is the exact inverse of n, computed rather than remembered: both
directions ask the same question about the same spans and compare against the
column the walk parks on, so x presses one way and x back land exactly where
you started, pane boundaries and the ring's seam included.
A ring rather than a list with two ends because a shell's cursor sits at the
prompt, below everything it has printed, so a walk that could not come round
would have nowhere to go on the very first press -- which is the case n/N were
written for.
One motion everywhere, no pane-kind or buffer-kind special case. The only
thing a buffer may change is the GRAIN of what a step selects, and it does it
with one flag rather than a branch: output_pane.Traits.commands (renamed from
`executes`, which named one reader's behaviour rather than the fact) makes a
row select WHOLE, because a ThemeSel line is a word to run and has no path
inside it to pick out. `]d`/`[d` are not n/N -- they are helix's diagnostic
motions, their job is to ARRIVE, and they still reach searchStep.
THE TTY PROMPT. Leaving raw tty blanked the prompt row, and the command you
had typed at that prompt shares the row, so it went too -- a shell out of tty
read as output only. OSC 133 marks the row CELL by cell, so the two are
separable: config.tty_blank = .prompt cuts the prompt's own columns and leaves
the command, left-hugged at column 0 in line with the output under it rather
than in a bay of blanks. .prompt_and_input is the old behaviour, kept.
Because the row is now something you can put a cursor in, enterTty adds the
hidden prompt width back before asking ghostty to walk the shell's own cursor
to it -- the modal column on a cut row is short by exactly that much.
Verified: unit-test 186/186 (nine new), snap 87/87 (new ttyprompt.snap),
hxdiff 481 and hxparity 561 with 0 mismatches, tty and gui both build. And
against the real binaries rather than the harness: in a pty, SPC y emits OSC
52 carrying exactly the selection while plain y emits nothing, SPC p issues
the read and pastes the reply, and a bracketed paste of "dd..." inserts text
instead of deleting two lines. In a real SDL window, SPC y then SPC p round
trips through the system clipboard while the default register holds different
text. Setting tty_blank back to .prompt_and_input reproduces all 86 old
goldens byte for byte.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Every keystroke in a shell pane rebuilt the motion surface from scratch:
shellRows dumped ghostty's WHOLE history+active grid, split it, blanked the
prompt rows and handed back slices into the scratch arena, which the next
update threw away. A pane sitting on a multi-megabyte agent transcript paid an
O(scrollback) dump per press of `j`, and paid it once or twice per key, since
flatSurface then rebuilt the same rows joined by '\n' beside it.
The dump is now memoized against the pane it was built for (term_pane.RowsCache
on Pardes.shell_rows), gpa-owned rather than scratch-arena because the whole
point is to outlive the update that built it. One entry, not a table: the
surface is built for the pane the cursor is in, and a second pane asking would
only double a multi-megabyte buffer for a slot it is about to lose again. A
pane that is not the live one is answered from the arena as before.
The lifetime rule is the part that would have rotted silently, so it is one
rule and it is written down: `rows` is handed out to callers, so everything
that notices the entry has gone bad — output arrived, the grid reflowed, the
pane died, another pane wants the slot — only marks it `stale`, and the
buffers are freed in exactly two places, `sweep` at the TOP of an update
before any handler can be holding them, and `reset` when the editor goes away.
Nothing frees mid-update. dropPane clears the pointer immediately though: a
freed pane's address comes back from the allocator as a different pane, and an
entry still naming it would answer for the wrong grid.
Two things fall out of having the join already:
- flatSurface returns the memo's `text` verbatim when the lines it was handed
are the cached rows untouched, instead of rebuilding the join.
- paneCursorLines returns `rows` directly when there is no edit buffer, where
it used to copy the array one slice at a time to produce exactly what it was
given.
One bug on the way past, in the same function: an EMPTY edit buffer writes one
line but modal.lineCount("") is 0, so `ls` was sized one short of what the
loop writes — the same floor the paste site needs. Killing a whole line
(`A<C-u>`, `d%`) on a buffer covering the last row made that a length of zero.
And test/perf.zig grows the axis that would have caught this: a terminal
scoreboard beside the file one, three scrollback fixtures (64 KiB, 1 MiB,
8 MiB — half the ceiling) against render / output / resize-rows / resize-cols /
key-down / edit-char, sharing the existing text and JSON reports and the
--base comparison. resize-cols and resize-rows are both there because a COLUMN
change reflows every page in the list and a row change does not.
Measured on that table: key-down is 142 / 630 / 636 us across the three
fixtures — flat from 1 MiB to 8 MiB, which is the dump being gone, and render
flat at ~110 us throughout. What remains of key-down's step at 1 MiB is the
linear scan indexOf refuses to index for a terminal; that is now a ponytail
waiver naming its own price (615 us against 140 us) and the threading through
paneOff/panePos/paneLineStart it would cost, to be done the day 0.6 ms shows
up next to something anybody can feel.
|
| | |
|
| | |
|
|
|
their own files
The core now lies FLAT at src/ and every subdirectory is one backend, so a
file being in no directory at all is what says it is core. Pane-kind bodies
leave pardes.zig for term_pane.zig / file_pane.zig / output_pane.zig, leaving
it the layout, the event/effect machine and the generic render loop.
Builtins are one struct each in builtins.zig, and the enum is folded out of
the file's own declaration list at comptime — a zig file IS a struct, so the
list of builtins and the builtins themselves are the same text. Adding one is
writing a struct. Key paths deliberately stay one table for the config pass.
Pure refactor: no golden moved.
|
