| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
| |
in, as acme's includename, <stdio.h> too; bare Incl lists them and Incl - empties them; the session's, seeded with /usr/include and /usr/local/include, kept in a dump; Indent's refusal says Enter keeps the indent always
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
| |
restored terminal draws its graphics as glyph art again
An image pane's Petscii choice was dumped; a terminal's was not, so a
Restore brought it back drawing pixels. dump.Terminal carries petscii,
and a restored terminal is turned to glyph art when it was.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
workspace tag reads Dump Themes Config Debug Exit
Config (SPC f c) opens init, found as the settings report finds it
(opts.startup_config_path: $XDG_CONFIG_HOME/pardes/init or
~/.config/pardes/init, and the macOS and Windows paths config.md gives). A
pane that already holds it is gone to instead; a file on disk is looked at;
with none, an empty pane is named for it, and Save makes its directory and
any above it first (File.make_dirs, fs.makeDirs) before writing. Without a
configuration directory it says so and opens nothing.
The report Config used to open, the startup path and every live setting, is
DumpConfig, in a +DumpConfig pane. No alias keeps the old meaning.
The workspace tag's default words put Themes where NextColor was, NextColor
staying a builtin, and Config beside it. A tag the user edited is kept as it
was: a dump stores only an edited one (topbar_custom), and a restore puts
back only that.
theme.snap types NextColor onto the workspace tag to click it, and tagnav's
walk back to Dump takes five long-word steps. The rest of the re-recorded
goldens differ in the workspace words and their widths only.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
A script could read and write a column's tag but not act on the column.
col/<serial>/ctl takes Delcol, Joincol, New and Tty, each acting on that
column as from its tag; col/<serial>/exec runs a word as a middle click in
the tag; rmdir col/<serial> closes an empty column and refuses one with
panes (ENOTEMPTY, an err record saying why). The root ctl's refusal of
Delcol and Joincol points at col/<serial>/ctl. A dump keeps each column's
serial and Restore logs restoredcol <old> <new>; the dump golden gains
them. Documented: Joincol's survivor, the column on the right, keeps its
serial and tag.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
A session running with Placement pardes came back from Restore as acme: a
dump kept the layout and the theme but no setting. It now keeps every
setting line that differs from a fresh session's, as the root ctl reads it,
and a Restore applies them; the theme stays where it was kept, the font the frontend's,
and REPL bindings are still dropped. The dump golden gains the three the
snapshot harness sets.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
| |
A script holding serials from before a Restore could not find its panes: the
replacement numbers them afresh. The dump now keeps each pane's serial (0 in
older dumps), and the replacement's log says `restored <old> <new>` for each
after its `restore <path>`.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
| |
After Restore a dogfood agent's command panes were fish shells under a stale
`(make) exit 0` tag. The dump's terminal record now keeps a command pane's
line and status, and Restore brings it back done: what it printed, its exit,
no shell and no rerun.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
| |
A dogfood agent's `Tty bash` pane came back from Restore running fish: the
dump kept its directory but not the shell it was opened on. The dump's
terminal record now carries that shell (empty for the configured one, as
older dumps read), and Restore starts it again.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
acme's frame wraps a tag at its right edge and the window grows to show
every row (wind.c wintaglines); Tagup/Tagdown shrink it to one row and back.
Pane tags used to be one row, scrolled sideways to the caret. Now a tag's
lines wrap at its width (one cell kept for the caret past a full row) and it
starts expanded; insert-mode Up on the first row collapses it, Down on the
last row expands it, and Alt-Up/Alt-Down do so in either mode. A word the
wrap breaks across rows is still one word to a click and a selection.
Column and workspace tags keep scrolling sideways.
Tests read body rows relative to the body's first row; the 41 snapshot
goldens that moved were re-recorded by name after a programmatic check that
each differs only by body rows shifting under the taller tags, and twelve
scripts whose clicks targeted fixed rows now click the same text.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A terminal's tag said Tty whatever shell it ran. The host's acknowledgement
of the shell it forked now sets the word to Tty+<shell>, tinted like the tag's
name. Word+arg is taken as Word arg, one word a tag can hold and a click can
take whole (+ is a word character), so Tty+fish opens a terminal on fish, as
Tty fish does; Tty takes the shell as its argument, which the host forks for
that pane instead of the configured one. Every snapshot whose screen shows a
terminal's tag changes: 69 goldens, re-recorded by name, whose 297 changed
lines are all Tty becoming Tty+bash (the harness runs bash), the cursor
columns and style spans that moved with it, or that text cut at a pane's
width.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Kill quit the editor, which in acme is Exit; acme's Kill stops the
commands it started. Exit now quits as acme's does (exec.c, rowclean):
it refuses once, naming each pane with unsaved text, and quits when
asked again with nothing edited since (a small scratch is not asked
about). Kill, bare or with names, stops the commands pardes typed into a
terminal (an exec, a middle click, a pty/run) while their shell's marks
say they run, by SIGTERM to the terminal's foreground job, never to the
shell (acme posts the kill note, which terminates). Both are session
builtins; the topbar's Kill becomes Exit, same width, and every golden's
topbar row changed by exactly that word (checked line by line); the
builtins script scrolls one more row for the index's new line.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
messages
PDF highlights (hover preview, search, selection) are baked into page rasters,
and any change re-rendered the whole page with MuPDF; the TTY then re-sent it
as base64 (4.7 MB a page), the GUI as a new texture. Worse, a pointer motion
over a PDF invalidated the page even when no preview was shown, so every
motion paid that. Now:
- A raster whose baked highlight set equals the wanted one is left alone.
- A highlighted page keeps its clean rows (before highlights and tint); a
change repaints only the rows of quads that differ, running MuPDF's
highlight pass (pardes_pdf_paint_highlights) over those clean rows and
tinting them: the operations a full render performs, so the pixels are
identical. MuPDF band renders are NOT bit-identical to a whole page (edge
rows, resampled images), so they are never used to patch; the comment
claiming otherwise is corrected.
- ImagePlace.patch hands shells the changed rows; the GUI uploads just those
rows into the texture it holds.
- The TTY probes kitty shared memory (t=s) with an id vaxis never reaches and
sends rasters as a /dev/shm name when the terminal reads it; direct base64
otherwise (ssh).
- Shells that take row patches (GUI, TTY with shm) repaint a selection while
it is dragged instead of only on release.
Latency elsewhere:
- TTY: an animating frame no longer sleeps 16 ms blind; a tick thread posts
into the input queue, so input inside the frame is handled at once.
- TTY and GUI: queued pointer motions coalesce to the last.
- GUI: a skipped swapchain image re-arms the frame (3 retries); animations
still tick while nothing presents.
- Editing: the line index is carried across an edit instead of rebuilt from
a scan of the whole file per keystroke.
Messages fall into their row (ease-in; the GUI slides the band out from under
the tagline, a terminal fades it), stay until the next input as before, linger
MessageLinger ms (default 800), and dissolve (ease-out). MessageAnimation
toggles it; both are settings, in Config and startup files. The snapshot
harness pins the old behaviour. The detached server now ticks animations.
A restored terminal comes back live: the old screen and scrollback (dumped
as clean VT by ghostty's formatter, replayed at the new size; older dumps
fall back to their rendered text), a dim
"restored history" marker, then a new shell in the directory it was in.
Right-click on a line number in a file pane looks at that line (a sticky
context header's number included).
Measured with an external pty driver (TTY), an in-process fence trace
(GUI, PARDES_TEST_LATENCY), and test/pdf_pointer_bench.zig (pixel identity
against the baseline and a whole-page oracle); balanced A/A/B rounds, paired
per-round statistics.
Messages stack: each event gets its own row and its own fall, linger and
dissolve; a line keeps its row until it leaves and a new one fills the first
free row. Announcements and statuses are replaced in place, not stacked.
MessageFall, MessageDissolve and DumpDir are settings Config reports.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A message, a leader chord and a prompt used to share one row of body text at
the bottom of a pane, wearing the tagline font and nothing else about a
tagline. Now each one is a TagLayer of its own, emitted through the same
renderHeaderLayer the pane and column tags go through, so it gets the tagline
height, the small-font metrics, the band offset and the border for free --
none of which a body-grid row can have by changing its font role. The text is
right aligned. The prompt stays on the canonical grid because it owns a
cursor, and a cursor has to sit on a real cell.
The body starts BELOW the bands rather than under them, the way tree-sitter
context rows already worked. Pane.body_offset is how many rows they took and
Pardes.bodyTop(pane, rect) is the one place that answers "where does the body
begin" -- replacing fifteen copies of `if (tag_bottom) r.y else r.y + BOX_H`
spread across the paint, hit-test, scroll, PDF and image paths, which is what
let the bands and the text under them come adrift. Every notice is painted on
the grid as well, because the grid is what a terminal client draws and a band
it cannot see is a message it never gets; the GUI skips grid cells a tag layer
covers, so nothing is drawn twice.
Three bugs the bands exposed, fixed here:
- a prompt band flush with the right edge put its caret one column past the
pane, which the detached wire refuses -- so every frame was dropped for as
long as the prompt was open. The band now reserves that column.
- a click on a band mapped to Sel row 0, which is the TAG row: clicking
chrome expanded a word out of the tagline and ran it as a builtin.
- a watched file reloading under the editor changed the core without going
through update, so needs_frame was never set and the reload was never
drawn. Pardes.invalidate() is the name for that, and the file and theme
reloads call it.
A session can now drive its own 9P namespace instead of being refused one:
ownMountSuffix answers what a path names inside this editors own tree and
resolve, readLimit and write serve it from memory rather than making the
syscall that never returns. The match is anchored to whole components under
the registrys 9p/pardes/<name>, because a bare /pardes/<name> anywhere in a
string would claim ~/src/pardes/<name>/README -- and, before write learned the
same trick, write the trees bytes over the real file. readFileLimit and
writeFile refuse instead, having no core to answer from.
A toggle setting SETS when given `on` or `off` and only flips when it is bare,
so the report LocationsConfig prints can be fed back as configuration and mean
what it says.
Snapshots: 97/98, from 0/98. The goldens were several commits stale and 17
scripts had stopped running; `config <line>` is a new script command that
appends to the per-script startup config, so a script that clicks body
coordinates pins `Verbose off` instead of counting the rows an announcement
moves. nested-optout is left failing on purpose: two levels of nesting prepend
vaxis F3 codepoints to typed lines, which is a real bug and is written down in
docs/divergences.md with a repro.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
| |
|
|
| |
Empty marker on the last pre-Reload change. Keep the Reload experiment on reload (3801914), its first change on reload-start (200a1fc), and the unfinished performance investigation on reload-perf-wip.
|
| |
|
|
|
|
| |
Consolidate pane, layout, memory and host code. Serve 9P by default over Unix sockets, with runtime mounts and optional TCP/QUIC transports. Remove FUSE and obsolete proof-of-concept examples.
Fix highlighting and terminal-history performance, expand differential and stress-test infrastructure, sort navigation results while preserving the next occurrence, add syntax-colored Braille minimaps, remove SPC-k, and document 9P interaction as a repository skill.
|
| |
|
|
| |
takes a path argument
|
| |
|
|
| |
optional methods
|
| | |
|
| |
|
|
| |
+ snapshot refresh
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Three changes that all turned out to be the same shape -- a feature that
worked in one direction, or for one pane kind, and quietly did not in the
others.
CLIPBOARD. Every register write emitted set_clipboard, so deleting one
character threw away whatever the desktop was holding; multi-cursor yank took
the join's early return and emitted nothing at all, so the same key reached
the clipboard on one cursor and not on two. Nothing could READ the clipboard:
the SDL shell had no SDL_GetClipboardText anywhere in it, and the tty shell
never asked for OSC 52, so `p` from another application was dead in both.
Now it is helix's split. y/d/c/p/P/R and the acme chords are the DEFAULT
REGISTER and nothing else; the system clipboard is five words on helix's own
letters -- SPC y, SPC Y, SPC p, SPC P, SPC R -- spelled as builtins so they
land in Help and are executable like every other verb. The one exception is
the tag `y` chord, which still mirrors out because a tag is always insert, so
SPC cannot be pressed there, and copying the path out is the whole point of
the chord.
Reading is a new read_clipboard effect answered by an ordinary Event.paste, so
the round trip is honest about being one: SDL and NSPasteboard answer inside
the same drain, the browser answers a promise, and a terminal answers over
OSC 52 or -- far more often -- refuses. A refused read is a paste that does
not happen, and the request dies at the next keystroke rather than landing
minutes late in whatever pane is focused by then.
The tty shell also enables BRACKETED PASTE now and coalesces
paste_start..paste_end into one event. Before this a paste arrived as a flood
of individual key presses: plausible in insert mode, and in normal mode every
pasted character ran as a command.
n/N. They stepped the armed results buffer and immediately Looked each row, so
you could not walk past a hit without opening it. They are a MOTION now:
select the next look-able text, open nothing, and let Enter decide. What they
step is the largest whitespace-delimited run look.resolve can act on
(look.lookableSpan, wrapper punctuation peeled), over a RING of panes -- every
pane that has performed a look, most recent first, then the output buffers
that have not, newest first, and only if both are empty the pane in front of
you. N is the exact inverse of n, computed rather than remembered: both
directions ask the same question about the same spans and compare against the
column the walk parks on, so x presses one way and x back land exactly where
you started, pane boundaries and the ring's seam included.
A ring rather than a list with two ends because a shell's cursor sits at the
prompt, below everything it has printed, so a walk that could not come round
would have nowhere to go on the very first press -- which is the case n/N were
written for.
One motion everywhere, no pane-kind or buffer-kind special case. The only
thing a buffer may change is the GRAIN of what a step selects, and it does it
with one flag rather than a branch: output_pane.Traits.commands (renamed from
`executes`, which named one reader's behaviour rather than the fact) makes a
row select WHOLE, because a ThemeSel line is a word to run and has no path
inside it to pick out. `]d`/`[d` are not n/N -- they are helix's diagnostic
motions, their job is to ARRIVE, and they still reach searchStep.
THE TTY PROMPT. Leaving raw tty blanked the prompt row, and the command you
had typed at that prompt shares the row, so it went too -- a shell out of tty
read as output only. OSC 133 marks the row CELL by cell, so the two are
separable: config.tty_blank = .prompt cuts the prompt's own columns and leaves
the command, left-hugged at column 0 in line with the output under it rather
than in a bay of blanks. .prompt_and_input is the old behaviour, kept.
Because the row is now something you can put a cursor in, enterTty adds the
hidden prompt width back before asking ghostty to walk the shell's own cursor
to it -- the modal column on a cut row is short by exactly that much.
Verified: unit-test 186/186 (nine new), snap 87/87 (new ttyprompt.snap),
hxdiff 481 and hxparity 561 with 0 mismatches, tty and gui both build. And
against the real binaries rather than the harness: in a pty, SPC y emits OSC
52 carrying exactly the selection while plain y emits nothing, SPC p issues
the read and pastes the reply, and a bracketed paste of "dd..." inserts text
instead of deleting two lines. In a real SDL window, SPC y then SPC p round
trips through the system clipboard while the default register holds different
text. Setting tty_blank back to .prompt_and_input reproduces all 86 old
goldens byte for byte.
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
THE SEAM TAKES A WRITER. `lsp.query`'s `out` is a `*std.Io.Writer`, not a
`*std.ArrayList(u8)`. The shell owns the buffer behind it (an
`Io.Writer.Allocating`), so a backend never allocates the result, never frees
it, and cannot get the allocator wrong — the invalid-free class of bug has
nowhere left to live. It also deleted a parameter from five functions: they
only ever took a `gpa` to allocate rows, and 0.16's unused-parameter error
found every one. `lsp.row()` lost its allocator argument too.
Since a Writer cannot rewind or be counted, `query` renders into a scratch
Allocating first: the log wants an exact row count, and `explain` throws the
rows away and prints narration in their place.
INTROSPECTION. `SPC l i` (Lspinfo) and `SPC l w` (Lspwhy), in the `l` group
that now holds every language command (see below).
They exist because of the seam's own contract: a backend never fails loudly,
which is right for an editor, but it makes a broken backend and a correct one
that found nothing look identical from the outside. Every query now leaves a
record — kind, file, offset, duration, row count, and THE ERROR `run` returned,
which `catch {}` swallowed and which was visible nowhere. Lspinfo prints those,
plus which ZLS is compiled in, which zig lib dir and whether it actually opens
(the usual cause of "gd does nothing in std"), and what the backend answers
versus refuses. It answers from ANY pane, including one with no file, because
it is about the backend — which matters precisely when the pane you are sitting
in is the problem; both shells now send status for a file-less pane.
Lspwhy narrates the REAL resolution path. The trace is threaded through `goto`
itself, so what it prints is the position context the analyser returned and the
branch that actually stopped. A debug view that re-derives the logic beside it
is one that can disagree with it.
CTRL-CLICK IS gd. Mouse gained a `ctrl` field, set by both shells (SDL asked
directly via GetModState rather than read off key-event bookkeeping, which a
click with no prior keypress would miss). The flag rides the drag rather than
firing on the press: a click does not place the modal cursor until RELEASE, so
a query asked at press time would answer about wherever the cursor previously
sat. A ctrl-DRAG still selects.
The snapshot DSL gained a `ctrl-` button prefix (SGR bit 4, what a terminal
sends and what vaxis decodes). test/snapshots/lspdebug.snap covers all three,
including a PLAIN click in the same spot that must NOT jump — without it the
test would pass on a bug that made every click a goto. Durations cannot live in
a golden, so PARDES_LSP_NOTIME (set by the harness, like PARDES_DUMP) omits
them.
58 snapshot scripts, hxdiff 360, hxparity 440, unit 46, gui build: all green.
lspbench: 17/17, 0 false claims.
THE WHOLE LANGUAGE GROUP LIVES UNDER SPC l.
pardes keeps its own leader letters back. `SPC d` is Del again, `SPC k` is
Kill, `SPC s d`/`SPC s r` are Dump/Restore and `SPC h t` is Tutor — exactly
where they were before the language work touched them.
The previous pass put the LSP commands on helix's bare `<space>` letters and
moved pardes's builtins out of the way (Kill k->q, Del d->wc, Dump/Restore
s?->f?, Tutor ht->T). That was the wrong trade. Those five are the most-pressed
keys in the editor and predate the language work; an LSP command is something
you reach for deliberately and can afford one keystroke more.
So every LSP command keeps HELIX'S OWN LETTER and gains the `l` prefix:
`<space>k` -> `SPC l k` (hover), `<space>d` -> `SPC l d` (diagnostics),
r/a/h/s/S/D likewise. Nothing to re-learn but the prefix, and `Lspinfo`/
`Lspwhy` were already there.
THE GOTOS ARE UNTOUCHED. `gd` `gD` `gy` `gi` `gr`, `]d`/`[d`, `]D`/`[D`, `=`
and ctrl-click all stay exactly as helix has them — they never collided with
anything, so there was never a reason to move them, and they are the ones you
actually press mid-edit.
leader.snap is restored to the pre-LSP script (its `key q` unmapped-key step
works again now that Kill is back on `k`) plus one new step for `SPC l ?`. Its
`SPC ?` root listing had to stop waiting on Restore: the full list grew to 33
rows and row 21 falls off the pane, so it watches an early row instead.
DEPENDENCY IMPORTS NOW RESOLVE. `gd` on `@import("vaxis")` opens vaxis's root
file; before, it silently did nothing while `std` worked perfectly.
The asymmetry was not a wiring mistake. ZLS's uriFromImportStr answers exactly
three ways: a relative `.zig`/`.zon` path from disk, `std` from `zig_lib_dir`
(one directory, which we supply), and EVERY OTHER NAME only by running
`zig build --build-runner` to discover the module graph. That last branch needs
`zig_exe_path`, which this backend sets to null on purpose — so every
dependency import returned `.none`. Confirmed twice over: in ZLS's source, and
by `SPC l w` on the import string, which printed the STOP line naming exactly
that branch. (The introspection builtin diagnosing its own backend on its first
real outing is a decent argument for having built it.)
We never needed a compiler for this: build.zig IS the module graph. It folds
`root_mod.import_table` into a name -> root-source-file table at configure
time and passes it as a build option; the backend consults it precisely where
ZLS gave up. Correct by construction — a dependency added or renamed in
build.zig cannot forget to update it — and it costs no subprocess, no build
step and no runtime work. `SPC l i` now lists the table, since "is this name
even importable" is the first question when a jump does nothing.
Two limits, both stated in the code: a module whose root is a GENERATED file
is skipped (it has no path until make() runs), and a file inside a dependency
importing that dependency's OWN internal module name is still a miss — that
would mean running its build.zig.
TRAP: the table is folded out of root_mod.import_table, so `addOptions` had to
move BELOW every `addImport` call. Attached where it was, the table is empty.
TOPBAR GAINS `Help`, WHICH IS WHY `SPC ?` LOOKED BROKEN.
A bare `pardes` boots straight into tty mode (main.zig: `args.len == 1`), where
every printable key belongs to the shell — so SPC never reaches the leader, and
`SPC ?`, the one thing that would tell you the leader exists, is exactly the
thing you cannot press. Ctrl-b first and it all works; nothing was broken. But
"the help is unreachable until you already know the escape hatch" is a bad
answer, and there was no mouse route either: Help was the one builtin missing
from the bar.
Row 0 is not a pane, so a middle-click there is dispatched before any pane's
mode is consulted — the word works in tty mode, which is the only reason it
earns the width. APPENDED, not inserted, so every existing topbar word keeps
its column and no golden's click coordinates move. test/snapshots/ttyhelp.snap
pins it from a bare boot: click Help, get the list, shell still TTY at its
prompt, then Ctrl-b + SPC ? for the keyboard route.
All 58 goldens carry row 0, so all 58 moved. Verified mechanically that the
only changes are the row-0 text and the row-0 style run (0-47 -> 0-52), plus:
dump/restore record the topbar inside their .zon, and tagnav's `$`+Enter now
executes `Help` rather than `Grep` because the bar's last word changed — still
exactly what that step's comment claims it tests.
THE DEPENDENCY FIX HAS A CEILING, NOW STATED. The module map is consulted from
OUR goto handler, not from inside ZLS, so the analyser still cannot type the
`vaxis` const: `gd` on `@import("vaxis")` opens the file, `gd` on `vaxis.init`
finds nothing. That is now spelled out at the top of lsp_zls.zig and on
moduleRoot rather than left implied, and `SPC l w` detects the case by name —
if the left side of a failed field access is a known dependency it says so,
instead of the generic "could not resolve". Lifting it means giving ZLS a real
BuildConfig, either by letting it run the build runner (a subprocess, and with
no cross-query cache that is once per keypress) or by synthesizing one into
BuildFile.impl. Both are real work and neither is smuggled in.
Also fixed while there: the field-access miss was only explained when ZLS
returned null, but it returns an EMPTY SLICE when it typed the left side and
found no such member. Both are "gd did nothing" from the outside; both are
explained now.
|
| | |
|
| |
|
|
|
|
|
|
| |
Colors lifted from the user's own helix theme (~/.config/helix/themes/pardes.toml,
pinned against a real hx render through a pty). Theme gains box/box_dim so a
restrained theme can turn the accent down; the hardcoded gray.* overlay greys
were the dark theme's own fields spelled twice and are gone. The old default is
still one NextColor away.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The image tag spelled out `Petscii <C64|Term> Ascii` and actOnSelection
matched those words by hand before the builtin dispatch. They are three
real Builtins now (SPC t p/l/a), so the by-word matching is gone, the tag
is a plain `img <path> Del`, and with nothing live left in it the image
early-returns in curTail, enterTagEdit and the tag-click guard go too — an
image tag edits like every other pane's.
Colors and Crt leave the topbar for SPC t c / SPC t r: set-once display
switches should not spend width in a bar you read every frame. NextColor
stays, it is the one you cycle repeatedly. Both remain full builtins.
The snap scripts that clicked those words now press the leader instead, and
images.snap finally exercises the palette and ascii toggles for real: its
old clicks at x=57 landed on the neighbouring shell's tag, so that toggle
had never been covered. The test PPM grew to 512x512 with LCG noise so the
ASCII bitmaps actually win cells and dropping them visibly changes the art.
|
| | |
|
| |
|
|
| |
+ dump-load tty detection (startsWith "TTY "), tutor.txt docs, exec/fileedit snap tag-click cols +1 for the wider prefix, all 18 goldens regenerated (indicator text + 1-col tag shift only)
|
|
|
test/ (snapshot parity harness + 18 frozen goldens). One sans-IO core, vaxis tty + SDL3 GPU native + wasm web shells, 18/18 parity with the purged prototype, 7.6k lines vs 12.1k. Fix: gui shell pre-sized the core at init so the greet-releasing resize never fired (blank panes until first interaction); live sessions now init at defaults and get the real grid as a resize event (the shell contract, documented on Options).
|
