| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
| |
A +Search row for a pane with no path (a terminal's), a jump list row and
a line-number look said @p<slot>, the pane's place in the core's table,
which no client can see. They now say @p<serial>, and @p resolves a
serial. Re-recorded by name, their diffs checked: jumps, ttylook and
psearch (whose waits now say @p1) for @p<serial>, and with them argv,
nested, reflow, tinywin, ttyhelp and ttyonly for the boot scratch now
named <cwd>/+New (the change before).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
| |
Empty marker on the last pre-Reload change. Keep the Reload experiment on reload (3801914), its first change on reload-start (200a1fc), and the unfinished performance investigation on reload-perf-wip.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
glslc is the one build input that wants a tool a stock machine does not have,
and it is also the input that changes least often: eight GLSL files that have
outlived several rewrites of everything around them. Asking every machine that
wants to run the SDL shell for shaderc is the wrong trade.
The SPIR-V is now COMMITTED, under shaders/prebuilt/, and -Dprebuilt-shaders
embeds that copy instead of shelling out. The default stays the honest one --
compile the shaders that are actually in the tree -- because the flag trades a
dependency for a freshness problem: with it on, the .glsl sources are not build
inputs at all, so editing one changes nothing.
`zig build shaders` is the other half, and it is deliberately independent of
-Dplatform: it recompiles every shader and writes the result back into the
tracked directory, so whoever changes a shader refreshes the cache on a machine
that has the compiler and commits the diff. `jj diff shaders/prebuilt` after it
is the freshness check -- empty means the cache was already current.
The shader list is also spelled once now (gui_shaders): the eight embeds, the
eight glslc runs and the refresh step all read it, so adding a shader is a name
there plus the @embedFile in gui.zig, not three edits in two places.
Verified: -Dplatform=gui -Dprebuilt-shaders builds with glslc absent from PATH,
and image-harness passes on that binary -- real SDL GPU pipelines built from the
committed SPIR-V, 512 source pixels read back. The default gui build still runs
the eight glslc steps; tty runs none. The committed bytes are identical to a
fresh glslc run, and `zig build shaders` is idempotent.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Three changes that all turned out to be the same shape -- a feature that
worked in one direction, or for one pane kind, and quietly did not in the
others.
CLIPBOARD. Every register write emitted set_clipboard, so deleting one
character threw away whatever the desktop was holding; multi-cursor yank took
the join's early return and emitted nothing at all, so the same key reached
the clipboard on one cursor and not on two. Nothing could READ the clipboard:
the SDL shell had no SDL_GetClipboardText anywhere in it, and the tty shell
never asked for OSC 52, so `p` from another application was dead in both.
Now it is helix's split. y/d/c/p/P/R and the acme chords are the DEFAULT
REGISTER and nothing else; the system clipboard is five words on helix's own
letters -- SPC y, SPC Y, SPC p, SPC P, SPC R -- spelled as builtins so they
land in Help and are executable like every other verb. The one exception is
the tag `y` chord, which still mirrors out because a tag is always insert, so
SPC cannot be pressed there, and copying the path out is the whole point of
the chord.
Reading is a new read_clipboard effect answered by an ordinary Event.paste, so
the round trip is honest about being one: SDL and NSPasteboard answer inside
the same drain, the browser answers a promise, and a terminal answers over
OSC 52 or -- far more often -- refuses. A refused read is a paste that does
not happen, and the request dies at the next keystroke rather than landing
minutes late in whatever pane is focused by then.
The tty shell also enables BRACKETED PASTE now and coalesces
paste_start..paste_end into one event. Before this a paste arrived as a flood
of individual key presses: plausible in insert mode, and in normal mode every
pasted character ran as a command.
n/N. They stepped the armed results buffer and immediately Looked each row, so
you could not walk past a hit without opening it. They are a MOTION now:
select the next look-able text, open nothing, and let Enter decide. What they
step is the largest whitespace-delimited run look.resolve can act on
(look.lookableSpan, wrapper punctuation peeled), over a RING of panes -- every
pane that has performed a look, most recent first, then the output buffers
that have not, newest first, and only if both are empty the pane in front of
you. N is the exact inverse of n, computed rather than remembered: both
directions ask the same question about the same spans and compare against the
column the walk parks on, so x presses one way and x back land exactly where
you started, pane boundaries and the ring's seam included.
A ring rather than a list with two ends because a shell's cursor sits at the
prompt, below everything it has printed, so a walk that could not come round
would have nowhere to go on the very first press -- which is the case n/N were
written for.
One motion everywhere, no pane-kind or buffer-kind special case. The only
thing a buffer may change is the GRAIN of what a step selects, and it does it
with one flag rather than a branch: output_pane.Traits.commands (renamed from
`executes`, which named one reader's behaviour rather than the fact) makes a
row select WHOLE, because a ThemeSel line is a word to run and has no path
inside it to pick out. `]d`/`[d` are not n/N -- they are helix's diagnostic
motions, their job is to ARRIVE, and they still reach searchStep.
THE TTY PROMPT. Leaving raw tty blanked the prompt row, and the command you
had typed at that prompt shares the row, so it went too -- a shell out of tty
read as output only. OSC 133 marks the row CELL by cell, so the two are
separable: config.tty_blank = .prompt cuts the prompt's own columns and leaves
the command, left-hugged at column 0 in line with the output under it rather
than in a bay of blanks. .prompt_and_input is the old behaviour, kept.
Because the row is now something you can put a cursor in, enterTty adds the
hidden prompt width back before asking ghostty to walk the shell's own cursor
to it -- the modal column on a cut row is short by exactly that much.
Verified: unit-test 186/186 (nine new), snap 87/87 (new ttyprompt.snap),
hxdiff 481 and hxparity 561 with 0 mismatches, tty and gui both build. And
against the real binaries rather than the harness: in a pty, SPC y emits OSC
52 carrying exactly the selection while plain y emits nothing, SPC p issues
the read and pastes the reply, and a bracketed paste of "dd..." inserts text
instead of deleting two lines. In a real SDL window, SPC y then SPC p round
trips through the system clipboard while the default register holds different
text. Setting tty_blank back to .prompt_and_input reproduces all 86 old
goldens byte for byte.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
file:LINE:COL-ENDLINE:ENDCOL, with the two short forms people actually type
reading naturally: file:412:9-21 on one line, file:412-418 whole ones. Ends are
inclusive. A path feature, not a search feature — a ranged path typed in a tag
or middle-clicked out of a shell's output selects just the same; search is only
its first consumer.
The dash is the fussy part. `-` was already a file char, so a ranged word
survives click expansion whole, but a range needs a number on BOTH sides or
my-file:10, build-2 and 2026-07-30 would stop being paths. Table-driven test in
look.zig for exactly that.
Selecting goes through the cellRange/setPaneRange pair the multi-cursor work
left, and hxOff clamps both ends, so a stale range selects what still exists
rather than crashing or reaching past EOF — pinned with an 8:6-400:9 range in a
nine-line file.
Producers: / search, Grep, and five LSP sites through a new spanRow — goto,
references, rename tokens and both symbol lists were throwing away real
protocol ranges at path:line:col. Left alone deliberately: Find rows are bare
paths with nothing to span, a jump is a spot not a span, and the diagnostic and
format paths only ever have a point, where half a range would be worse than
none.
One knock-on worth knowing: n now leaves an EXPLICIT selection, so a topbar
execute chords it. grep.snap's no-match step was silently becoming
`Grep TARGET`; it runs from the leader path now, which never chords, and the
dedicated chord steps stayed where they were.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
asked, never into a column of their own
placeDoc classified any file pane as a doc, so a +Search opened from a lone
shell took layoutInsertColumn(0) - a whole new leftmost column, shoving every
existing column sideways - and an open results list was then eligible as the
split parent for a real file, stacking documents under the list. An output
buffer has no file behind it and no Save; it is the result list belonging to
the pane that asked for it. Now it is that on both sides of the rule: it
splits below from_id whatever kind of pane that is (a source that died falls
back to stackDocLeft, the same last resort a full column bar uses), and it is
skipped when a real doc hunts for its split parent, so a file opened from a
search row joins the docs instead of the results.
Real docs are untouched: fsearch/rsearch/look-file/tutor/lookpanes all pass
unchanged. psearch is the proof - its results snap was two columns (the shell
pushed to x=70, its gutter run at 70-71) and is now one 140-wide column with
the +Search stacked below at the same x origin.
|
| |
|
