diff options
| author | Gabriel Schneider <[email protected]> | 2026-11-17 05:50:47 -0300 |
|---|---|---|
| committer | Gabriel Schneider <[email protected]> | 2026-11-17 12:15:01 -0300 |
| commit | 1637cf5efa338fee7797ba83f264dcab5bde4800 (patch) | |
| tree | 7d11506d62f4c9613747fb517952c0ca24a3ef3f /examples/live/shaders/synth.comp | |
| parent | 85452cbb28ec78913d72017fdcb666c40e2fc153 (diff) | |
| download | sketchbook-1637cf5efa338fee7797ba83f264dcab5bde4800.tar.gz sketchbook-1637cf5efa338fee7797ba83f264dcab5bde4800.zip | |
examples/live: the interpreter of a tape, and its probe
Demo 1's route: a program becomes a flat tape of at most 128 instructions
(src/Lang.zig: the ops, the instruction, the tape and the two uniform
blocks that carry it; build.zig writes Lang.Op out as ops.glsl, so the op
numbers have one definition), and ONE interpreter, shaders/vm.glsl, runs it
per pixel (picture.frag) and per sample (synth.comp, crossing from the
tape it replaces over the first `fade` samples). Instruction i writes
register i; the tape is pushed as uniforms.
The probe measures it before anything else is built: `zig build probe`
plays made-up tapes (every instruction reaching the last, a noise in ten)
under --profile-gpu. RTX 3050 (driver 620.70.06), Debug host, means of 601
frames, three runs agreeing within 0.07 ms:
picture, empty tape 720p 0.14-0.23 1080p 0.19-0.28 (a pass's cost)
picture, 60 720p 1.38-1.45 1080p 2.89-2.96
picture, 128 720p 2.71-2.81 1080p 5.86-5.95
picture, 128 at 640x360 0.85-0.94
The budget, under 2 ms at 1280x720: 60 instructions meet it, 128 do not.
The cheap fixes, on 128 at 720p: the tape in a storage buffer 2.97-3.03
(worse); the registers as an array of 16 (kept in registers, indexing
turned into selects) 5.82-5.93 (twice as slow); the 128-array with only
16 slots used 2.11-2.34 (cache footprint: a register allocator would buy
about a sixth); half resolution 0.85-0.94. So the sketch will draw a
tape longer than 64 instructions at half resolution, scaled up. The
variants are kept outside the tree. The synth's numbers taken here were
of a kernel that wrote nothing (its uniform block was past SDL's 4 KiB):
the sound's change measures it again.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_016Y9MNBECMWcJD5pdS4SR6T
Diffstat (limited to 'examples/live/shaders/synth.comp')
| -rw-r--r-- | examples/live/shaders/synth.comp | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/examples/live/shaders/synth.comp b/examples/live/shaders/synth.comp new file mode 100644 index 0000000..9a066a6 --- /dev/null +++ b/examples/live/shaders/synth.comp @@ -0,0 +1,26 @@ +#version 450 +#extension GL_GOOGLE_include_directive : require +// One audio block, one thread per sample: the out tape at each sample's +// time, crossing over the first `fade` samples from the tape it replaces, +// so an edit does not click. x and y are 0. +layout(local_size_x = 64) in; + +#include "Synth.glsl" +#define TAPE(i) u.tape[i] +#include "vm.glsl" + +layout(set = 1, binding = 0) buffer Block { float block[]; }; + +// A sample the device can take: no NaN or infinity, -1..1. +float heard(float v) { + return isnan(v) || isinf(v) ? 0.0 : clamp(v, -1.0, 1.0); +} + +void main() { + uint n = gl_GlobalInvocationID.x; + if (n >= u.count) return; + float t = u.start + float(n) / u.rate; + float v = heard(vm(0u, u.len, t, 0.0, 0.0).x); + if (n < u.fade) v = mix(heard(vm(MAX_TAPE, u.old_len, t, 0.0, 0.0).x), v, (float(n) + 0.5) / float(u.fade)); + block[n] = v; +} |
