summaryrefslogtreecommitdiff
path: root/src/esp32p4_9p.zig
diff options
context:
space:
mode:
authorGabriel Schneider <[email protected]>2026-11-05 11:21:15 -0300
committerGabriel Schneider <[email protected]>2026-11-05 12:41:12 -0300
commitcfd2b993feda1b3f7474225bb32db8cac8edc5ae (patch)
tree3248246c043fd1865e74adb979a9cb555f918cd6 /src/esp32p4_9p.zig
parentc0b2e5d9194ce35b9fbb58d8d6e18de66cb209a8 (diff)
downloadpardes-cfd2b993feda1b3f7474225bb32db8cac8edc5ae.tar.gz
pardes-cfd2b993feda1b3f7474225bb32db8cac8edc5ae.zip
targets: the ESP32-P4 board port goes (src/esp32p4*.zig and src/esp32p4/, -Dplatform=esp32p4 with its pinned riscv32 target, -Desp32p4-cols and -rows, the Peek, Poke, Hexdump and Gpio words and the Board behind them, the board's 9P engine options, the gpio_toggle host slot), and with it every guard and limit only the board needed: terminal_panes and terminal.enabled (ghostty is in every build), memory.limits' board branching (the desktop values stay), MAX_PANES 64 and MAX_COLS 16 fixed, the board's boot buffer and its embedded boot, the pager's and the terminal's emulator-less paths; tests: the board's GPIO, ring and Board ones go, the boot-OOM and transition-grid ones stay under their own names; the perf harness loses the board's fixture, so the Debug baselines of both frontends are recorded again (--only medium --reps 10)
Co-Authored-By: Claude Opus 5.5 <[email protected]> Claude-Session: https://claude.ai/code/session_016Y9MNAtZenFv4weoMD3cge
Diffstat (limited to 'src/esp32p4_9p.zig')
-rw-r--r--src/esp32p4_9p.zig186
1 files changed, 0 insertions, 186 deletions
diff --git a/src/esp32p4_9p.zig b/src/esp32p4_9p.zig
deleted file mode 100644
index 5fcab85b..00000000
--- a/src/esp32p4_9p.zig
+++ /dev/null
@@ -1,186 +0,0 @@
-//! Standalone GPIO 9P firmware over UART0; the editor is not linked.
-//! UART0 carries protocol bytes only, including fatal diagnostics.
-const std = @import("std");
-const soc = @import("soc");
-const hal = @import("hal");
-const config = @import("config");
-const ninep = @import("9p.zig");
-const gpio = @import("esp32p4_gpio.zig");
-const uart = @import("esp32p4/uart.zig");
-
-const Pads = struct {
- pub fn level(pin: u8) u1 {
- return hal.gpio.getDrivenLevel(pin);
- }
-
- pub fn drive(pin: u8, want: u1) void {
- hal.gpio.configureOutput(pin, .{ .readback = true });
- if (want == 1) hal.gpio.setHigh(pin) else hal.gpio.setLow(pin);
- }
-};
-
-comptime {
- for (gpio.Header.gpio_pins) |pin| {
- if (pin > hal.gpio.max_pin) @compileError("JP1 names a pad this chip package does not have");
- }
-}
-
-const Fs = gpio.Fs(Pads);
-const Server = ninep.Server(Fs, ninep.board);
-
-comptime {
- std.debug.assert(@typeInfo(@FieldType(Server, "fids")).array.len == 32);
- std.debug.assert(@sizeOf(Server) <= 10 * 1024);
-}
-
-const msize: u32 = 1024;
-
-var in_buf: [msize]u8 = undefined;
-
-var out_buf: [2 * msize]u8 = undefined;
-
-var stage: [128]u8 = undefined;
-
-const baud: u32 = 921600;
-
-var srv: Server = undefined;
-var fsys: Fs = .{};
-
-export fn zig_main() noreturn {
- soc.flushFlashCache();
-
- if (config.cpu_mhz != 90) hal.clkrst.setCpuFreq(switch (config.cpu_mhz) {
- 180 => .mhz180,
- 360 => .mhz360,
- else => .mhz90,
- });
-
- _ = hal.rwdt.disable();
-
- _ = uart.drainInput();
-
- _ = uart.setBaud(baud);
-
- srv = Server.init(.{ .in = &in_buf, .out = &out_buf, .root = gpio.root });
-
- var stage_len: usize = 0;
- while (true) {
- if (stage_len < stage.len) stage_len += uart.read(stage[stage_len..]);
- if (stage_len != 0) {
- const took = srv.push(stage[0..stage_len]);
- if (took != stage_len) std.mem.copyForwards(u8, stage[0 .. stage_len - took], stage[took..stage_len]);
- stage_len -= took;
- }
-
- while (srv.retry()) |req| {
- const a = fsys.handle(req);
- srv.reply(&a.reply, a.bytes);
- }
- while (srv.next()) |req| {
- const a = fsys.handle(req);
- srv.reply(&a.reply, a.bytes);
- }
-
- const queued = srv.output();
- if (queued.len != 0) srv.wrote(uart.writeSome(queued));
-
- if (srv.protocol.dead) {
- srv.hangup();
- while (srv.next()) |req| {
- const a = fsys.handle(req);
- srv.reply(&a.reply, a.bytes);
- }
- _ = uart.drainInput();
- stage_len = 0;
- srv = Server.init(.{ .in = &in_buf, .out = &out_buf, .root = gpio.root });
- }
- }
-}
-
-fn die(msg: []const u8) noreturn {
- var buf: [ninep.errmax + ninep.header_len + 2]u8 = undefined;
- const bytes = ninep.encode(
- .{ .rerror = .{ .ename = msg[0..@min(msg.len, ninep.errmax)] } },
- ninep.notag,
- &buf,
- // unreachable: the message is cut to errmax and buf is sized to it
- ) catch unreachable;
- uart.write(bytes);
- while (true) {}
-}
-
-fn hex8(buf: *[8]u8, v: u32) void {
- var shift: u5 = 28;
- for (buf) |*slot| {
- const nib: u8 = @intCast((v >> shift) & 0xf);
- slot.* = if (nib < 10) '0' + nib else 'a' + (nib - 10);
- shift -%= 4;
- }
-}
-
-export fn trapEntry() linksection(".text.entry") callconv(.naked) noreturn {
- asm volatile ("j trapReport");
-}
-
-export fn trapReport() noreturn {
- const mcause = asm volatile ("csrr %[o], mcause"
- : [o] "=r" (-> u32),
- );
- const mepc = asm volatile ("csrr %[o], mepc"
- : [o] "=r" (-> u32),
- );
- const mtval = asm volatile ("csrr %[o], mtval"
- : [o] "=r" (-> u32),
- );
- var msg = "trap mcause=00000000 mepc=00000000 mtval=00000000".*;
- hex8(msg[12..20], mcause);
- hex8(msg[26..34], mepc);
- hex8(msg[41..49], mtval);
- die(&msg);
-}
-
-pub const std_options: std.Options = .{
- .page_size_min = 4096,
- .page_size_max = 4096,
- .logFn = logFn,
-};
-
-fn logFn(
- comptime _: std.log.Level,
- comptime _: @EnumLiteral(),
- comptime _: []const u8,
- _: anytype,
-) void {}
-
-pub const panic = std.debug.FullPanic(panicImpl);
-
-fn panicImpl(msg: []const u8, first_trace_addr: ?usize) noreturn {
- var buf: [ninep.errmax]u8 = undefined;
- @memcpy(buf[0..7], "panic 0");
- buf[7] = 'x';
- hex8(buf[8..16], @truncate(first_trace_addr orelse 0));
- buf[16] = ' ';
- const n = @min(msg.len, buf.len - 17);
- @memcpy(buf[17..][0..n], msg[0..n]);
- die(buf[0 .. 17 + n]);
-}
-
-export fn _start() linksection(".text.entry") callconv(.naked) noreturn {
- asm volatile (
- \\ li t0, 1 << 13
- \\ csrs mstatus, t0
- \\ la sp, __stack_top
- \\ mv fp, sp
- \\ la t0, trapEntry
- \\ csrw mtvec, t0
- \\ la t0, __bss_start
- \\ la t1, __bss_end
- \\ bgeu t0, t1, 2f
- \\1:
- \\ sw zero, 0(t0)
- \\ addi t0, t0, 4
- \\ bltu t0, t1, 1b
- \\2:
- \\ j zig_main
- );
-}