| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
| |
write; Get and Edit's e load over a scratch under 100 bytes unasked, as Del closes it; Putall saves a Zerox pair once; bare Tab on the root ctl says the width as from a pane, and a ctl check of Tab no longer sets it; a directory read is "is a directory" (EISDIR), an unreadable file "permission denied" (EACCES), Incl of a file "not a directory" (ENOTDIR), and a device "not a regular file", never read to the stream limit
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
never FileTooLarge, ParseZon or a bare `parse zon`
Restore read failures named the Zig error (FileTooLarge, NotAFile,
ReadFailed), a file that is no dump said `not a pardes dump (ParseZon)`,
and a ThemeFile that did not parse said `parse zon`. Messages.errorWords
says an error in words (the few that read badly spelled out plainly,
the rest spaced and lower case, as reportError did), and zonWhy gives
the parser's first error with its line: `not a pardes dump: line 1:
expected ...`, `theme file x.zon: line 3: ...`.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
MessageLinger 0-60000 milliseconds, a path's limit, a font's form
A setting that chooses among words named them, but one that takes a
number, a path or a font said only "bad value" over 9P and "does not
take that value" from a tag, leaving the range to be guessed. The
refusal, both ways, now says its range or what it takes, from one
table beside the words.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
over 255 bytes
A Save of a 3000-byte path failed with the record "err 2 ctl: Save…", which
lost the reason. The first cause was reportError, which formatted into 256
bytes, so the operation's path filled the buffer before the reason was
written. The second was the waiting write's late failure, which took the
first 256 bytes of the message row, never its end. Now reportError has room
for the longest path. reportFailure also keeps the words fitted as an err is
(fitErr: the path gives up its middle, the reason stays), and the late
failure of a Save, a Dump, a shell or a ThemeFile takes those words.
fs.md already said a name holds up to 255 bytes a component, but a longer
one was taken and only failed later at Save. Now it is refused when written.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
workspace tag reads Dump Themes Config Debug Exit
Config (SPC f c) opens init, found as the settings report finds it
(opts.startup_config_path: $XDG_CONFIG_HOME/pardes/init or
~/.config/pardes/init, and the macOS and Windows paths config.md gives). A
pane that already holds it is gone to instead; a file on disk is looked at;
with none, an empty pane is named for it, and Save makes its directory and
any above it first (File.make_dirs, fs.makeDirs) before writing. Without a
configuration directory it says so and opens nothing.
The report Config used to open, the startup path and every live setting, is
DumpConfig, in a +DumpConfig pane. No alias keeps the old meaning.
The workspace tag's default words put Themes where NextColor was, NextColor
staying a builtin, and Config beside it. A tag the user edited is kept as it
was: a dump stores only an edited one (topbar_custom), and a restore puts
back only that.
theme.snap types NextColor onto the workspace tag to click it, and tagnav's
walk back to Dump takes five long-word steps. The rest of the re-recorded
goldens differ in the workspace words and their widths only.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
| |
p.messages.at(i)
The rename deferred from the file split; no behaviour changes. Output.zig's one call follows.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
| |
middle to …
An Rerror carries 128 bytes (Plan 9's ERRMAX) and the engine cut longer text there, and a builtin's failure was first clipped between words to 256 with ...: either way the end, which says why, was what went. tree.handle now fits a long reason by cutting the middle of its longest path, else of the whole text, on a character boundary, and reportFailure fills its buffer the same way.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
| |
A failure the editor said as it performed a write's work (a Save's disk write, a shell, a language server) was posted as a msg and taken back out when the write's err was logged, which it cannot be once a log follower has read it: a follower saw both. Such a failure is now posted without a msg in the first place (fs.write_waits), and nothing is taken back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
| |
With Verbose on by default, /log filled with msg - DumpDir, msg 4 Grep and the like, with machinery to take an announcement back out when its builtin failed or said something itself. A msg record is now only something said; the take-back machinery goes with it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |\ |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The notice chip's motion was mostly there (a drop easing out on the
Motion flavour, a dissolve easing in, Lift's shadow in tier 4 at its
fade). Its dissolve took 300 ms against a 180 ms fall, the wrong way
round for §8.1 (leaving quicker than arriving, 100 to 160 ms):
MessageDissolve now defaults to 150. The field comments had the two
easings swapped; the stack test pins a longer dissolve for the case it
checks. docs/config.md and docs/effects.md say so.
Tests: both timings in their bands, leaving quicker. Gates as G7 (no
golden moved). Feel review: .scratch/render/notices/.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
is said as `dial failed: <reason>`
Mount took any well-formed dial and nothing was found out until the
first look through it, which then said `look: look: dial`. Mount now
probes the peer (version, attach, its root) with the turn out, and fails
its write, mounting nothing, when none answers; the dial errors read as
words, `no answer`, `timed out`, `hung up`, and a look through a peer
gone since names its path: `look: /n/peer/f: dial failed: no answer`.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
A failure said while it ran (Exit's refusal, a Del refused) or later by
the host (a Save's write, a Dump's) left `msg N Save` in the log as if it
had worked. The announcement's record is remembered and taken back out
on either, unless a follower read it already. A refused pane/new logs its
err alone, and a failed Dump says its reason in words (`file not found`,
not `FileNotFound`) so its msg goes and the err is the one record.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| | |
A Msg past 256 bytes was cut mid-word and silently: nothing told a reader
of /log that the line went on.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
A builtin that failed through a ctl failed the write and logged its err,
but through look, exec, tagexec or a column's exec it only said so on the
message row, logged as a msg, and the write succeeded. Now every click
write runs its builtin as a ctl line does (ctl.captured): a failure fails
the write, with its words (EINVAL for malformed input, else EIO or what
the words name), logs one err and no msg or announcement. get's Modified
and a look miss are shown but logged once, as their err. A control
character's refusal names its reason, a failed click reads back nothing,
and look never reads back a pane closed since. The special case for a
cut-short Edit through exec goes (the rule covers it); fs.md's table of
exceptions becomes the one rule, as does the skill.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
A builtin failing a ctl write logged its Verbose announcement, its words as
a msg, and the write's err, so the same failure again never repeated the
newest record and never collapsed. Its err alone is logged now (the msg is
still shown and kept in +Messages). A repeat of a record a follower has
read is a new line with the running total, (xN) being N in all. fs.md
states both rules.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Placement could split a pane down to a tag and one row, or give a new one
less. Every placement now checks the pane it made and each pane it shrank
against its tag (wrapped at its width) plus two rows: where they lack the
room, the column's tallest pane is halved instead, and where none can give
it the new pane is refused with "no space for a pane in that column"
(ENOSPC over 9P) and closed at the step's end, once its maker is done with
it. splitBelow and splitParent leave two body rows (a boot layout, split
before any row exists, is as before). Re-recorded by name: lookpanes (panes
one or two rows lower) and splitparent (the 6-row squeeze now refuses);
fs.py closes the scratches and long-named panes it no longer needs, since
its 24-row session filled.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |/
|
|
|
|
|
|
|
|
| |
9ns reads an error's words, not its errno: "window shut down" came out as
EIO where every other file of a gone pane gives ENOENT, and "no pane
slots" as EIO. The event and pty/data reads a pane closed under now say
"no such pane: its window shut" (ENOENT), and the cap says "no space for
a pane: 64 max" (ENOSPC; 9ns has no word for ENFILE).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Sixteen panes was far too few for a real session. MAX_PANES is now 64 on a
desktop and stays 16 on the board; the 48 more slots cost about 3.7 KB each
in fixed tables (the core 1.33 to 1.45 MB, its surface 19 to 72 KB), and a
pane itself (84 KB and its terminal) is allocated only when it opens. At the
cap, pane/new fails with `pane/new: no pane slots: 64 max` and an err
record rather than a bare ENFILE, a 9P look or exec that would open a pane
fails its write with the same words and reads back empty, and New, Tty,
Tutor and Alt-n say it on the message row (their ctl writes fail with it).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |\ |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The flavours looked alike because Lift, the only motion that read them,
moves a shadow a few pixels: overshoot and wind-up were sub-pixel. By design
now: crisp leaves at full speed and never passes its mark; smooth (the
default) eases in and out in twice crisp's time, a slide arriving in 208 ms
(inside §8.1's 220); bouncy passes its mark by ~30% and settles twice;
playful winds up, passes by ~40%, and stretches and squashes, text included
(the user's choice). Small motions are exaggerated by the flavour's gain.
Motion gains launch, gain, span and norm, and ease(u)/speed(u) for moves of
fixed length. The notice drop follows ease() over its fall (alpha never
behind its position) and stays inside its pane's body past its row. Panel
tracks carry the flavour in Track.motion (the old padding byte; macOS header
name follows); opening and moving slides, zooms and rises follow it over
span x their frames; landed, a pane is exactly its target; closing keeps
its own exit. A pane past its mark never takes a neighbour's click; a
rising one stays in its box.
Tests: each flavour's lift trajectory distinct; flavour character; exact
landing bit for bit; a stretched pane's drawn cells map back; the overshoot
hit rule; the vertical clip at peak; legacy tests pinned to crisp. GUI
golden 18-mid-transition changes (the retuned smooth slide at frame 6).
Shared files: src/animation.zig, src/Presentation.zig, src/Messages.zig,
src/macos.zig, src/config.zig, src/pardes.zig tests, src/ninep/screen.zig
test, docs/effects.md, docs/config.md.
|
| |/
|
|
|
|
|
|
| |
active pane's
A session builtin written to /ctl runs at the active pane, so its messages were logged under that pane's serial, as if the pane had said them. They are now `msg -`, and still shown on the active pane.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |\ \ |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
of rows; wire v8
src/Layer.zig merges TagLayer and BodyLayer. `rows` (0 = no layer) and a
cursor at {x, y}. A tag of N rows is ONE layer of N grid rows: tagHit answers
the row as `line`, bodyHit keeps its meaning, and the per-line layer bases
(TAG_LINE_LAYER_BASE, HEADER_LINE_LAYER_BASE) are gone, not aliased.
Wire v8, the one bump: tag layers carry rows and cursor y, and the frame
carries the placed region list. v7 and v9 peers are refused in both
directions (server test over both, a new frontend test over both).
web: tag_layer_value 11 = rows, 12 = cursor y; app.mjs lays every row.
macOS: the Zig side compiles against Layer; pardes.h still sees one row
per tag layer (accepted, the macOS shell is ignored for now).
No visual change: snapshot goldens and the 17 GUI goldens byte-identical.
Shared files touched: pardes.zig, Messages.zig, gui.zig, macos.zig,
detached/client.zig, detached/server.zig, detached/wire.zig (plus web.zig,
app.mjs, edit.zig, look.zig). Not touched: mouse.zig, tagline.zig,
colors.zig, tty.zig, dump.zig, exec.zig, host_io.zig, panes.zig.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
A shell now answers Host.now, its monotonic clock in ns, and the pump
advances core animation to it: one .tick per whole 16 ms frame since core
time last stood still. The same animation therefore takes the same time at
60, 120 and 144 Hz, over ssh and after a slow frame (the GUI's re-armed
clock ran them ~25% slow at 144 Hz; the tty's post-frame sleep drifted).
nextWake() lists every core animation in one place: a frame from now while
anything moves, the end of the wait while something only waits (a message
lingering, the look-hover delay), null when idle. Shells sleep exactly that
long, and a wait is jumped to its end in one step, so an 800 ms linger
costs one frame instead of fifty. An overshoot under 1.5 ms after a step is
let go: at 60 and 120 Hz every display frame takes exactly one step (a 16 ms
frame against a 16.67 ms vsync would otherwise double-step every 24th).
The six tick drivers are gone: tty's timer thread only times the wait,
interruptibly (a newer, shorter request cuts short a sleep still timing a
longer one); the GUI's
AnimationClock, web's JS tick bank (pardes_tick now takes rAF's timestamp),
the detached server's and the board's ticks; grid mode steps a virtual
clock straight to each wake. PARDES_TEST_CLOCK, set by the snapshot
harness, gives tty and the detached server the same virtual clock.
Every stepped frame is drawn. The old pump never drew the last frame of a
fade (a .tick asks for no frame, and the fade was over by the check), so a
theme switch stopped at 9/10 of the way until the next input: theme.golden,
themesel.golden and the GUI's acme-light scene move to the theme's true
colours, and nothing else changes. The frozen previous grid is captured only
while a panel transition is chosen, not on every idle frame.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Pure moves, no behaviour change. draw.zig holds the whole core frame in
order: render, the pane, tag, header and notice painters it calls, and the
character-effect composition (Pardes.render stays a declaration alias).
Presentation.zig is the panel presentation state as a file struct, and
animation.zig the easing curves, transition kinds, tracks and boxes, the
character effects' sources and the generic displayed-value transition, all
of which lived in layout.zig. layout.zig keeps only layout.
|
| |/ /
| |
| |
| |
| |
| | |
A failure read `Del k|j: InvalidArgument`, `Kill: NoSuchCommand`, `ill-formed control message`, or nothing at all. reportError now spells an error's name as words, and the refusals name their accepted forms: pty/ctl lists its verbs, a flag file takes 1 or 0, a setting word takes on or off, Del takes k, j or nothing, Repl takes - or a language. Kill with nothing to stop says so, /focus says pane, a Look that found nothing says no match, and pty/run on a command pane says it is not a shell. A ctl write's failure has room for the Repl list and is cut between words, the Repl word at a character.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
language's files
Repl python in a terminal's tag or on its ctl binds it (Repl - unbinds, Repl
bare says the binding, the same word again changes nothing), with an id,
python-a, python-b, in its tag. An exec made by a gesture on the body of a
file in that language -- a middle click or the execute key, on any text, a
single word too -- or on the REPL's own body is typed into it, bracketed if
its program asked for that, else line by line with a once-said warning for
Python's blank lines, then Enter; the message row says -> python-a in the
tag's name tint, the log send <from> <to> <id>. Several bound for the
language: the pane asks which on its notice band, as Del asks, one key
answering, Esc none, nothing remembered. The gesture is known where it is
dispatched (mouse.zig, the execute key), so the tag's words, Exec <text> run
by name and a command word @`cmd` stay commands, and a 9P exec is never
sent. A finished command pane is no REPL; bindings are not dumped. The docs
spell out the escapes, the pdb and input() caveat and the no-bracketed-paste
papercut.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
request is served
serveFs expired them, but a read is answered while a step is out in a
syscall, because reads change nothing, and this one changed pane messages
and needs_frame from under the step. The detached session's loop now expires
them between steps, and while nobody is attached and a message is up it
looks again every 100 ms rather than waiting for something to wake it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |/
|
|
|
|
|
|
|
|
|
|
| |
A message lingers until input dismisses it, and a detached session with nobody
attached has no input: its messages, and /screen, kept what was said long ago.
The session now marks the core unattended while no client is attached, and
the core drops a pane's messages once the newest has been up MessageLinger on
the clock, checked as it is stepped or served. A pane's older lines go with
its newest rather than each on its own clock; the render pipeline's clock is
the place for that.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
Kill queued a signal effect for later, so the job it saw running by its marks
could have ended, and another started, before the signal went; and with job
control off the job shares the shell's process group, so the host skipped it
and Kill reported nothing. Kill now calls the host's kill_job while it holds the
turn, and when the only job is the shell's own group says 'Kill: no job to
signal', which also fails a write of Kill to ctl.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
argument is refused before anything runs
A ctl write failed only on a malformed line: Mount x reported its error
in the editor while the write succeeded, and a bare Mount failed only as
it ran, after earlier lines of the write. acme's ctl answers a command's
error (editors/acme/xfid.c:700). Builtins now declare requires_arg beside
takes_arg (settings: those with a value to set), and the check refuses a
bare one as wrong #args before any line runs; while a ctl runs, the first
error a builtin reports fails the write, quoted with its line, and the
prompt refusal quotes its line too. Docs say what a failure mid-write
leaves done.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
| |
A tag that is a text can hold a newline, and the tagline, the body under it
and the pointer all assumed one row. The pane's tag now takes a row per line
(up to eight, and never the body's last row); the body starts below it, the
rows a pointer counts start the body after the tag's lines, a click on any
line puts the tag's cursor there, and a pixel shell gets a tag layer per
line. A tag of one line draws exactly as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Not a pure move: state moves. Pardes's three message-log fields
(`messages: [message_log]LoggedMessage`, `messages_head`, `messages_len`)
become the fields of Messages.zig itself (`log`, `head`, `len`), and
Pardes embeds one as `messages: Messages = .{}`. messageLog reads only the
ring, so it now takes `m: *const Messages` and is called
`p.messages.messageLog(i)` (Output's +Messages view and the log test);
logMessage still needs the panes and the 9P event log, so it keeps
`p: *Pardes` and writes `p.messages.log/head/len`. No behaviour change.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
|
|
Pure move, no behaviour change: the Message stamp helpers, LoggedMessage,
setStatus, setMessage, showMessage, dismissMessage, dismissLine,
advanceMessages, advanceLine, messagesAnimating, MessageMotion,
messageFrames, messageMotion, noticeText, noticeLife, blendRgb,
logMessage, messageLog, reportError, the notice painters (leaderText,
noticeCols, Printed, printRight), collectNotices, and the six message
tests go verbatim to Messages.zig.
The methods become free functions taking `p: *Pardes`. setStatus,
setMessage and reportError are called from ~170 places as `p.setMessage(..)`,
so Pardes keeps three declaration aliases (`pub const setMessage =
Messages.setMessage;`) and those call sites stay as they are; every other
call changes from `p.x(..)` to `Messages.x(p, ..)` (46 of them). The five
shells' `pardes.Pardes.Message` become `pardes.Messages.Message`. The
message ring's fields stay on Pardes for now; moving them into Messages is
a separate change.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
