| Commit message (Collapse) | Author | Age |
|---|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
Empty marker on the last pre-Reload change. Keep the Reload experiment on reload (3801914), its first change on reload-start (200a1fc), and the unfinished performance investigation on reload-perf-wip.
|
| |
|
|
|
|
| |
Consolidate pane, layout, memory and host code. Serve 9P by default over Unix sockets, with runtime mounts and optional TCP/QUIC transports. Remove FUSE and obsolete proof-of-concept examples.
Fix highlighting and terminal-history performance, expand differential and stress-test infrastructure, sort navigation results while preserving the next occurrence, add syntax-colored Braille minimaps, remove SPC-k, and document 9P interaction as a repository skill.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A message row is cleared by the next keystroke, so anything reported while you
were looking at another pane was gone before you could read it — a save that
failed, a watcher's reload, a builtin's complaint. `setMessage` now records
into a fixed ring first: no allocation and no failure path, because it sits
underneath `reportError`, which is reached from sites that are reporting an
allocation failure. `Messages` (`SPC h m`) reads it back oldest-first.
Three things an adversarial pass found, each of which defeated the feature:
PROGRESS IS NOT A MESSAGE. A language server emits `Indexing 47%` several
times a second, and every tick is a distinct string BY CONSTRUCTION, so no
de-duplication can collapse it: at the client's one-per-150ms throttle it
takes about nineteen seconds to push every real message out of the ring. A log
that one indexing run empties is not a log. That path is `setStatus` now —
the row, and nothing else.
THE CLOCK MADE EVERY HOST MESSAGE UNIQUE. `message.stamp` prefixes `HH:MM:SS`,
so `saved /x.zig` at 14:32:07 and at :09 compared unequal and the ring filled
with rows that look identical and each say (x1) — exactly the case the
de-duplication exists for. It compares `message.body` now, the row without its
clock, and the newest wording wins so the row carries the last time it
happened rather than the first. It also keys on the PANE (one pane's failure
must not be recorded as another's) and compares the truncated form, so two
identical messages over 256 bytes stop being two rows.
AND THE CAPACITY BELONGS IN limits.zig. 128 entries is 32.75 KiB that is
allocated whether or not anybody reads it — 8.5% of the ESP32-P4's whole
384 KiB heap, about the size of its effect ring. The board takes sixteen.
The builtins/leader goldens move because the listing gains a row, and
builtins.snap middle-clicks a SCREEN COORDINATE that Tutor moved out of; both
updated selectively and verified against a fresh run.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_016Q4RATpafkwahrovHQLKRf
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The seam grows a second backend: src/lsp/lsp_client.zig speaks JSON-RPC to
child language servers — rust-analyzer, clangd, gopls, tsserver, pyright are
rows in a spec table — while the in-process ZLS analyser keeps .zig. One
reader thread per server owns the socket, routes responses to a mailbox
under the conn mutex (monotonic condvar), answers server-to-client requests,
feeds the diagnostics store, and narrates $/progress and state changes
through a status sink both native shells post to the transient message row:
"rust-analyzer: cargo check 88% 955/1083" lands where a save narrates, with
the same clock. Chatty progress is throttled and deduplicated; settled
states always land, which is also what makes the goldens deterministic.
Nothing wedges and nothing healthy dies: waits are deadline-bounded, a
timeout cancels and returns no rows, three consecutive timeouts restart the
server ONLY while it is idle (an indexing server is narrating its own
excuse), spawn and handshake failures back off 10s to 2min, a crash shortly
after ready counts as a failure, and only a missing binary disables a spec.
PARDES_LSP_{RS,C,GO,TS,PY} override binaries; empty disables; the snapshot
harness pins RS to test/lspmock.zig and empties the rest.
Mutating answers really mutate now: the @put record beside rename @edit
carries per-range text, so = applies the formatter (both backends) and a
same-file WorkspaceEdit rename applies atomically, one undo step, narrated
("renamed 2 range(s)"); a multi-file rename previews as rows instead of
half-applying. Malformed responses fail closed: coordinates validated not
clamped, one bad TextEdit poisons the whole edit set, poison frames kill
the connection instead of buffering forever, decoded control bytes reject a
uri, hierarchy items too deep to reserialize are skipped.
Four kinds helix does not have, on SPC l: c/C incoming/outgoing calls (rows
are call sites), t/T super/subtypes. Pull diagnostics (3.17) preferred when
advertised. Help gains a language-keys footer for the motions no builtin
row could carry; lsp.rel and look.grep now share one path-shortening rule.
zig build lspprobe drives the seam from the CLI (comma-separated kinds share
one server); measured against a 1083-crate workspace warm: gd 26ms, gr 213
rows 165ms, incoming calls 212 sites 197ms, document symbols 670 rows 347ms.
docs/lsp.md tells the whole story; lsp-evaluation.md gets an addendum.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Step 5 of the 9P chain (docs/9p.typ 12.5, docs/registry.typ 9P-22, 9P-11, BOARD-1).
THE CLIENT. `Client` in src/9p.zig is the mirror of `Server` and the same shape:
sans-io, no allocator, no threads, no descriptor, caller-owned buffers, and it
builds freestanding. 152 bytes of struct against the server's 9,488, because a
client owns neither a fid table nor a park table -- the far end does.
The API is submit / push+output+wrote / take. Completion is a PULL: a callback
would fire inside push, inside the transport's read, inside the host's poll
dispatch, which is exactly where fs9_service says filesystem work must not
happen. `take()` returns the next completed operation or null, which is
`Server.next()`'s loop-until-null contract read from the other side. Tags are a
fixed 16-entry table indexed BY the tag, so an out-of-order reply -- which 9P
allows and both reference clients rely on -- costs one bounds check. The reply's
TYPE is checked against the request's op, because a tag is only as good as the
table behind it. A `Done` borrows the input buffer and is valid until the next
call; `take()` releases the previous frame on entry, so the rule is mechanical
rather than remembered, and read data and error strings are zero-copy.
And one real caller, so this is not a library with no user: the `9p` word takes
a dial and a path, walks another instance's tree, and opens the bytes in a pane
like any other `Look`.
THE BOARD. A SECOND image, not a second role: the console runtime keeps UART0
bidirectionally and is behaviourally untouched. On the new one the UART carries
9P AND NOTHING ELSE -- no ANSI, no vaxis, no allocator, no heap module. The loop
is uart.read -> push / retry+next -> handle -> reply / output -> writeSome ->
wrote. `writeSome` is new and additive: `write`'s bounded spin DROPS bytes on a
stalled transmitter, which on a protocol stream truncates a reply mid-message
and desynchronises for good, where a short count cannot. BOARD-1's one divider
write raises the line to 921600.
88,000 B text, 49,424 B bss, an 88,080-byte image -- 5.7% of the 1,536,000 B
partition, against the console image's 809,536 B.
THE COMPTIME BRIDGE, which is the part worth reading. `board9p.caps` is the ONLY
place the GPIO tree is described; node ids, parents, names, permissions,
handlers, buffer size and the per-pin directories are all derived from it, and
`fan.dirs` makes `gpio/<n>/value` one table entry serving eleven pins. Modes are
derived from which handlers a file has rather than declared. A second capability
is a table entry, not new tree code.
JP1 became a real table in the new leaf `src/board_pins.zig`, with the ASCII
drawing RENDERED from it at comptime and the pin list COLLECTED from it -- the
9P image links no core and so cannot import board_memory.zig, and copying the
table was not acceptable. A golden test pins the drawing byte for byte, the
console's own shape test still passes, and the identical bytes are present in
all three artifacts.
PROVED. Two daemons: B read A's `/1/body` through the `9p` word into a pane,
byte-identical to plan9port's `9p read` of the same path. Both board images
build. No hardware was attached, so nothing about the board is claimed beyond
what builds and what the host tests cover.
zig build unit-test 585/585. fs-bench unchanged and still zero allocations on
every read row.
---
REVIEW FIXES FOLDED IN. Steps 3, 4 and 5 were verified on the happy path and
then adversarially reviewed by three agents; eight defects, six fixed here, five
of them reproduced with measurements before and after. Full writeup in
docs/registry.typ `9P-27`. In brief:
* a remote crash of the WHOLE daemon: one `size[4]` of zero plus one byte hit
`unreachable` in `fs9_service.fill`. Also 99.7% of a core when the stuck
buffer made `room == 0` return without reading. Now `srv.dead` is a hangup,
checked before the room guard.
* the editor froze 177 s on a dial: `connect(2)` ran on a still-BLOCKING
socket before the deadline existed, and a full accept backlog waits forever.
Now non-blocking with the wait spent against the budget. After: 2.03 s.
* a 64 KiB pty read is exactly `queue_cap` and wiped every unread byte AND
dropped itself. `notePtyOutput` splits at half the cap. Deterministic.
* four silent sockets denied `--fs9` forever; connections now expire on the
same five-second rule the frontend transport already had.
* EMFILE spun a core; the listener pauses and leaves the poll set, as the
frontend listener does.
* `max_fids = 32` made `find` over `9pfuse` fail with 57 consecutive
`Rerror`s -- refuting this step's own acceptance clause. 256 for a host,
`board_fids` 32 for the microcontroller.
Found clean and worth recording: `sig` reaches the foreground process group; the
two-namespace pty lookup is right over both transports; `PaneFile`'s u4 wall is
guarded; reader counts release on every abrupt-death path; `fs_origin` routing
and the reply arithmetic hold under probing.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Esc stops recentring
## A terminal row's ANSI colours survive being edited
The loudest colour bug this editor had: one keystroke anywhere in a coloured shell row turned EVERY
column of it grey. `EditAnchors` anchored a buffer line only when it was BYTE-IDENTICAL to the shell
row it stood over, so a single differing byte dropped the whole row's colour projection. Worst shape
is invisible: append past the pane's right edge, where the text is clipped, and the row looks the
same and only its colour goes.
Anchoring is byte-level now. An edit leaves the row's own bytes at both ends, and being the same
bytes they keep the same colours; only what was typed has no cell under it, so only that takes none.
Live, on real `fastfetch`: a 32-column blue run split into 6 + 26 around one typed character.
Three defects underneath it, all found by machinery rather than by reading:
* A JOIN removes a buffer line while the buffer's covered span grows, so `lines == covered` and both
aligned guesses — Nth line over the Nth covered row, and the same counted from the bottom —
resolved to the SAME wrong row. Every untouched row below a join went plain. Anchoring is now a
streaming monotone matching: one shell-row cursor that only ever moves forward, advanced once per
buffer line, linear in the buffer where the version before it was quadratic.
* An EMPTY line is not evidence. Splitting a row makes one, it equals every blank row in the span,
and left free to look ahead it claimed the blank row below the last output and took every coloured
row in between out of reach of the lines that owned them.
* Reflow under a scrolled viewport. `PageList.getTopLeft(.viewport)` returns the viewport pin
verbatim, x and all, while `PageList.pin` forces x to 0 — so after a reflow remapped a tracked pin
into the middle of a row, the text pass dumped row 0 from that column while the colour pass paired
the fragment with the row's FIRST cells. Row 0 wore its left half's colours until the pane snapped
back to live output. `bodyText` dumps from column zero now, which is also what ghostty's own
renderer draws.
Also here: DECSCNM (reverse video) was silently dropped whenever `tty_filter` was off, because the
raw path resolved a `.none` colour by role and never consulted the mode.
The test that found the first two is the one worth keeping: random editing against an ABSOLUTE
oracle — every row's own text names the colour it must have — because the differential oracle it
replaced was blind by construction. It skipped the edited row, which is the row the user is
complaining about.
## Esc returns to a pane without moving its view
Esc in body normal mode runs `Last`, "the pane you were in before this one", and that went through
`focusPaneLine`, which recentred a file on the target line unconditionally. So returning to a buffer
repainted the whole screen to show a line that was already on it.
`focusPaneLine` takes a landing now: `.center` for the three callers going somewhere you have not
been (a look target, a path a pane already holds, `@pN:LINE:COL`), `.keep` for Esc. `.keep` leaves
the view alone and lets `ensureCursorVisible` — which already existed and already scrolls by the
minimum into the `scroll_off` band — be the only thing that may move anything.
Not `line = 0`, which `focusPaneLine` already understands as "focus and touch nothing": a background
pane's view can move while you are away, because the wheel scrolls the pane under the POINTER and a
resize reveals no cursor, so the recorded cursor plus a minimal nudge is what actually gets you back.
Ctrl-o and Ctrl-i keep centring, and the asymmetry is structural rather than arbitrary: `Last` only
ever CROSSES panes, so the pane it lands on already holds the view you left it with, while `jumpBy`
can land in the SAME pane, where a long in-file jump would arrive on the very top or bottom row with
`scroll_off` lines of context on one side. Helix splits the same pair the same way — its jumplist
centres, its buffer switch does not.
One deliberate consequence: under `.keep` a PDF's page is not restored AT ALL, because a page reveal
IS that pane's view and a reveal of the page you are already on still snaps `document_scroll_y` to
that page's start, discarding where you had read to. When something moved the pane while you were
away — the wheel again — Esc leaves it where the wheel left it, and Ctrl-o is how you reach the
recorded page.
## host_io.zig: the machine-local half of a host, once
`host.zig` is the seam. The part of the answer that is identical on every host with an operating
system under it — fork a pane's shell, put bytes on a disk — was written FOUR times: in tty.zig,
gui.zig, macos.zig and detached/server.zig. What those copies had in common says what they were for:
all four were missing FD_CLOEXEC on the pty master, so in every shell pardes has shipped, a program
in one pane could read another pane's terminal.
One copy now, and the wire got smaller for it: `ServerMsg.spawn` is gone. A frontend never asked the
server to fork anything — the server has an operating system under it and forks through `host_io`
like every other host — and `decodeClient` lost the scratch buffer that message needed.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
board cap on one screen
## The wire is the effect stream, not a new protocol
`pardes --detach` leaves a core running with no terminal; `pardes --attach` is a frontend that owns
a terminal and a socket and nothing else. N frontends on one core all look at the same screen —
`screen -x`, not N sessions.
The codec (`src/detached/wire.zig`) carries exactly one `Event` or one `Host.VTable` call per
message. That is not a coincidence and it is why there is no third vocabulary to keep in step: the
core's IO seam was already a struct of function pointers with plain-data arguments, so a socket is
a legal implementation of it. `nested.zig`'s socket could not be reused — it carries a builtin
command line, and a command line cannot carry a frame.
ARCHITECTURE-NEUTRAL on purpose, not as decoration. The frontend on the far end may be
riscv32-freestanding on the ESP32-P4 while the core is x86_64 Linux, so every field is an explicit
little-endian fixed width and no message is a blit of a native struct. A protocol that only works
between two builds of the same compiler would have thrown away the one frontend that motivated it.
## The board comes in; its toolchain stays out
`src/p4.zig` becomes `src/esp32p4.zig`, and the pardes half of `../05-zig-p4` — the vaxis-over-
serial runner, the UART editor terminal, the keystroke rescue ring, the on-die test suite — moves
into `src/esp32p4/`. `build.zig.zon` gains `.zig_p4 = .{ .path = "../05-zig-p4" }`, so
`zig build -Dplatform=esp32p4 -Desp32p4-firmware` builds, flashes, monitors and self-tests the
board from this repo's `build.zig`.
The DIVISION is the point. What moved is what only pardes wants: the runner that drives a pardes
core over a serial line. What stayed is everything a second project would also want — the HAL, the
register/radio/oracle layers, the linker script, `_start`. `zig_p4` declares no dependencies of its
own and its `build()` early-returns when it is not the root package, so this costs the package
graph exactly zero packages and the editor's own builds nothing at all.
## limits.zig: nine forgettable places become one budget
Nine `platform == .esp32p4` capacity tests lived in nine files. They were never nine decisions —
they are ONE decision, how much memory this build may spend, taken nine times where no reader could
see the total. `src/limits.zig` puts the whole budget on one screen with every cap named against
what it is measured against, derived from two booleans.
The payoff is testability on a machine that is not the board: the caps are ordinary comptime values,
so a host build can be compiled against the board's numbers and the parking, eviction and clamping
paths a 240 KiB core takes get exercised by the normal test suite instead of only over a UART.
## A bare `zig build`
`zig build` with no arguments now builds the tty and GUI binaries and installs them into
`~/.local/bin`, and says so once on stdout with the flag that overrides it. The old default built
one binary into `zig-out` — a path nothing on a `PATH` ever looks at, which made "build it" and
"use it" two different commands for no reason.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the P4
## Gpio
`Gpio 33` flips one pad and answers on the message row with what it did:
GPIO 33: 0->1
GPIO 33: 1->0
Bare `Gpio` draws the header instead, because the first question about a header is which pins it
has. The pin number is DECIMAL and it is the only literal in board_memory.zig that is - every
other one is an address, and addresses come off datasheets and linker maps that print hex, which
is why that file made everything hex two commits ago. A GPIO number is not an address, it is part
of a NAME: the schematic says GPIO47, the datasheet's pin table says 47, and `Gpio 20` meaning pin
32 would be a trap laid for the one argument anybody types from memory.
## The toggle is the host's, not the editor's
New `Host.VTable.pull_gpio_toggle`, and a `GpioFn` in the p4 ABI (hence version 2), rather than
board_memory reaching for GPIO_OUT the way `Poke` two functions above it would happily do.
Writing that register is not the job. A pad has to be pointed at the GPIO function in the IO MUX,
routed in the GPIO matrix, given drive strength and an input buffer with its pulls cleared, and
only then driven - four register files behind a per-pin table. That code already exists in
`05-zig-p4/src/hal/gpio.zig`, it is the same `configureOutput` the blink demo has always used, and
its register numbers are checked against ESP-IDF's own headers on the die by `zig build diff`. A
second copy inside the editor object would be a second copy under no test, and getting it wrong on
a pin that boots as something else is how you lose the console you are typing on.
Reported levels are the OUTPUT bits, before and after, because that is what a toggle means: the
level this board is driving. A pad's input buffer on an unconnected header pin reads the air.
## JP1, read off the schematic rather than remembered
The diagram is the vendor's own wiring, from sheet 2 "Expand IO" of
`01-esp32p4-m3/docs/JC-ESP32P4-M3_schematic.pdf` - the only document that carries this mapping. The
specification PDF's "Interface Description" page turned out to be a marketing render, and there is
no board user guide; the chip datasheet has a package pinout, which is not a header.
That sheet is a 872x1168 raster (`pdfimages -list` - the PDF embeds no vectors, so rendering it
larger adds nothing), and at that size the rows around pin 14 are genuinely ambiguous by eye. So
the mapping came from the drawing's geometry instead: thirteen wires leave each side of the symbol,
a net wire runs ~100 px to its label and a power stub ~21 px. Pin 8's wire is 21 px, which is what
identifies it as unconnected rather than as the first of the GPIO4x labels - the reading that had
GPIO47 one row higher and shorted GPIO45 to the ground bracket.
Cross-checked against a second source that has been in the tree all along: `05-zig-p4/build.zig`
documents `-Dled=20` as "JP1 pin 17", and GPIO20 lands on pin 17 here. Both facts are asserted in
the test, so the diagram cannot drift from either.
## Peek, Poke, Hexdump and Gpio are now the P4 build's alone
`board_memory.enabled` was `os.tag == .freestanding and !isWasm()`, on the argument that these
words are a property of having no operating system rather than a product configuration, and that a
predicate spelled out of `builtin` cannot drift the way a hand-maintained enum can.
Tidy, and it answered the wrong question. A word only exists if some shell offers it, and the
shells are the platforms. `Gpio` settles it beyond argument: its whole content is one board's
header, and a second freestanding port would need its own pinout rather than inheriting this one.
"Bare metal" was never the requirement, "this board" was, and the two only looked identical
because there is currently one of them. The old predicate's real work was excluding wasm -
`freestanding` too, where an address is an offset into a linear memory the engine owns - and naming
`p4` excludes it by construction instead of by a term somebody has to keep remembering. The target
is now the witness rather than the gate.
Absent means not compiled: the tty binary contains no `+Gpio`, no `+Hexdump`, no `ES_I2C_SDA` and
no `MisalignedAddress`.
## The boot buffer's lines are checked, not eyeballed
Three times now a line in that tour has been one or two characters too long for a 56-column grid,
and every time it was found by reading the die's screen - the expensive way to measure a string
literal. The text is a named `boot_buffer` with a test over it, six lines came down to fit with
margin, and the tour gained `Gpio`.
Tests: the pinout's width, its thirteen aligned pin rows, GPIO20-on-17 and pin-8-unconnected; the
decimal-versus-hex distinction; every boot-buffer line. Full suite green - unit-test, snap 95/95,
hxdiff 481/0, hxparity 561/0, image-harness, pdf-harness, mupdf-check - and tty, p4, gui,
p4 at 80x24, p4 with the fade forced on. On the die `p4-bench --check` is 5/5, the fifth being a
new one: three `Gpio 33` runs must report 0->1, 1->0, 0->1, because the alternation is the only
oracle a hardcoded string could not fake.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`-Dplatform=p4 -Dtarget=riscv32-freestanding` emits a single freestanding OBJECT
exporting a seven-function C ABI, not an executable. The board's toolchain
(../05-zig-p4) owns `_start`, the linker script and the UART driver and links this
in. The seam is bytes rather than types, so neither side can accidentally depend
on the other's internals, and a signature that drifts fails at link time.
The serial line is the whole of the I/O. `src/p4.zig` drives vaxis unchanged over
it: the renderer is a byte writer and `queryTerminalSend` is a byte writer, so the
terminal emulator on the host answers the capability handshake and the firmware
sees a real terminal. Measured going out over the wire on attach: alt screen,
in-band resize, cursor report, kitty keyboard, kitty graphics, DA1.
THREE WORDS EXIST ONLY HERE. `src/board_memory.zig` implements `Peek`, `Poke` and
`Hexdump`, gated on `builtin.os.tag == .freestanding and !isWasm()` - derived from
the TARGET, because they are a property of running with no OS under you rather
than a product option, and because wasm is freestanding too and is exactly what
must be excluded: in a browser an address is an offset into the linear memory this
editor's own heap lives in. Every access goes through `*allowzero volatile`: a
peripheral register is not memory, and address 0 is an ordinary unmapped address
on this bus. One 4 KiB cap per command, set by the console rather than the memory -
an unbounded dump would wedge the only console the board has for eleven hours.
Measured on ESP32-P4 rev v1.3 silicon, driven from a host terminal:
Peek 0x501101a4 0x0e63ce71, then 0xaeaa6919 on a second read - the
RNG register, so the volatile loads are not folded
Poke 0x5011002c 0xdeadbeef LP_STORE0; a later Peek returned 0xdeadbeef
Hexdump 0x5011002c 32 16 bytes a row, hex columns and an ASCII gutter
Peek 0x50110001 `peek: MisalignedAddress` on the message row
That last line is the one that matters. A misaligned 32-bit access traps, and a
trap in firmware is a watchdog reset that takes the session with it, so the check
that turns it into a message is the reason the file is hand-written rather than a
generic reader.
BARE METAL BOOTS AN EMPTY OUTPUT BUFFER. Every other boot layout in `init` makes a
shell, and on this platform that is not a preference but an impossibility: nothing
to fork, no pty to give a terminal pane. Booting one anyway produced precisely what
that describes - a pane whose tag ends in `Filter`, no gutter, no buffer, and every
keystroke vanishing into the Fallback's silent pty. An output buffer is also what
the platform's own words want, since Peek, Poke and Hexdump each fill one.
Sized for the board rather than for a desktop:
* `allocators.zig` gains a p4 tier that is ALL fallback - every capacity is zero,
so each arena spills immediately to the 384 KiB heap the firmware hands over,
and no megabyte-shaped static reservation lands in `.bss`.
* `source_manifest.zig`'s allowlist is EMPTY on p4. The table is ~0.95 MiB of
rodata against a 1.5 MiB flash partition; the firmware's filesystem is the
serial host's, through the Host vtable.
* The grid is clamped and the clamp is measured, not guessed: every cell is paid
for four times (vaxis Screen + InternalScreen, pardes Surface + previous_cells),
so 40x12 fits and 80x24 exhausts the heap during `Pardes.init`.
* `Vaxis.resize` deinits both screens before allocating replacements, so a failed
resize leaves vaxis rendering nothing. The p4 shell keeps the previous geometry
on failure instead of leaving a half-applied one.
Also here: `output_pane_integration_test.zig` had an exhaustive switch over
`Platform` that adding `.p4` left unhandled, which broke `zig build unit-test`
outright - the native test binary is the one consumer no platform build compiles.
346 tests pass again.
|
| |
|
|
| |
takes a path argument
|
| |
|
|
| |
optional methods
|
| | |
|
| |
|
|
| |
docs
|
| |
|
|
| |
+ snapshot refresh
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
glslc is the one build input that wants a tool a stock machine does not have,
and it is also the input that changes least often: eight GLSL files that have
outlived several rewrites of everything around them. Asking every machine that
wants to run the SDL shell for shaderc is the wrong trade.
The SPIR-V is now COMMITTED, under shaders/prebuilt/, and -Dprebuilt-shaders
embeds that copy instead of shelling out. The default stays the honest one --
compile the shaders that are actually in the tree -- because the flag trades a
dependency for a freshness problem: with it on, the .glsl sources are not build
inputs at all, so editing one changes nothing.
`zig build shaders` is the other half, and it is deliberately independent of
-Dplatform: it recompiles every shader and writes the result back into the
tracked directory, so whoever changes a shader refreshes the cache on a machine
that has the compiler and commits the diff. `jj diff shaders/prebuilt` after it
is the freshness check -- empty means the cache was already current.
The shader list is also spelled once now (gui_shaders): the eight embeds, the
eight glslc runs and the refresh step all read it, so adding a shader is a name
there plus the @embedFile in gui.zig, not three edits in two places.
Verified: -Dplatform=gui -Dprebuilt-shaders builds with glslc absent from PATH,
and image-harness passes on that binary -- real SDL GPU pipelines built from the
committed SPIR-V, 512 source pixels read back. The default gui build still runs
the eight glslc steps; tty runs none. The committed bytes are identical to a
fresh glslc run, and `zig build shaders` is idempotent.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The documentation had gone stale in the ordinary way -- claims that were true
when they were written and that nothing since had been obliged to re-read.
Some of them were load-bearing.
THE TUTOR. It still said there is no multi-cursor, that NextColor cycles three
themes, and that its practice blocks "are also run as unit tests (generated
from this file by tutor_gen)" -- a tool that appears nowhere in the tree, and
nothing anywhere parses a `# keys:` block. Left alone, that claim is what
makes the next wrong block survive.
Three of those blocks WERE wrong, and all three for one reason: since the
helix motion model landed, w/e/f/t SELECT the range they cross, so `i` after
one inserts at the SELECTION'S START. `w i Z esc` on "foo bar" gives
"Zfoo bar", not the "foo Zbar" the file promised. They were written against a
vim reading of the same keys. Every block in the file has now been run through
`zig build hxdiff` against the real core and matches byte for byte, and the
trap itself is written down in 3.3 rather than left to be rediscovered.
The tutor gains a PART 4 for everything added since it was written -- PDF
panes, the in-process ZLS backend, themes and fonts, the startup file -- and
PART 3 gains counts (and which keys ignore one), f/F/t/T, the whole g table
(bare `G` is a no-op; `ge` is the START of the last line), multiple cursors
and the s/S regex pair, `m`, `]`/`[`, `|`, insert mode, and all fifty leader
paths.
THE REST. design.typ's line table claimed 7,626 lines against a real 38,048,
and its rows did not sum to its own total; its Event/Effect boundary contract
-- the part a shell author writes against -- named four variants that do not
exist and omitted fourteen that do. lsp.md's probe count. config.md's
theme-name rules, which as written could not reach a zed theme at all.
helix-keys.md's Skipped section, holding five families that have since landed.
macos.md's menu bar, undocumented, along with sixteen other claims. web.md on
what the browser build can actually do.
SOURCE COMMENTS that had rotted alongside them: `tag_normal` is a space, not
the `•` its own comment describes; Wrap is ON by default, not off; a FontSel
row is SELECTED by n and RUN by Tab, not run by n; the SPC paths in lsp.zig
lost their `l` group prefix when the language group moved; and the
differential suites are 481 and 561 cases, not 360 and 440.
TWO THINGS FOUND BY DOCUMENTING THEM, both left standing and written down
rather than papered over. Typing `[^\n]` at an s/S prompt panics: the live
preview compiles every prefix, and `[^\` indexes an empty slice in mvzr's
parseCharSet. Both the tutor and a waiver recommended that pattern as the
workaround for `.` matching a newline; they now say what it costs and what
would make it sayable. And `Exec` is a builtin, so an `Exec` line in the
startup config types that command into a shell before the first frame -- the
tutor said nothing in that file is ever sent to one.
Nine adversarial reviews over two rounds, each with the hxdiff harness to
execute what it doubted. The second round exists because the first round's
fixes needed checking too, and it caught three regressions of my own -- one of
them a probe count I had "corrected" away from the truth.
Verified: unit-test, snap 87/87, hxdiff 481/0, hxparity 561/0, mupdf-check.
docs/design.pdf regenerated. The tutor's first seventeen lines are byte-
identical, which is what tutor.golden pins.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Three changes that all turned out to be the same shape -- a feature that
worked in one direction, or for one pane kind, and quietly did not in the
others.
CLIPBOARD. Every register write emitted set_clipboard, so deleting one
character threw away whatever the desktop was holding; multi-cursor yank took
the join's early return and emitted nothing at all, so the same key reached
the clipboard on one cursor and not on two. Nothing could READ the clipboard:
the SDL shell had no SDL_GetClipboardText anywhere in it, and the tty shell
never asked for OSC 52, so `p` from another application was dead in both.
Now it is helix's split. y/d/c/p/P/R and the acme chords are the DEFAULT
REGISTER and nothing else; the system clipboard is five words on helix's own
letters -- SPC y, SPC Y, SPC p, SPC P, SPC R -- spelled as builtins so they
land in Help and are executable like every other verb. The one exception is
the tag `y` chord, which still mirrors out because a tag is always insert, so
SPC cannot be pressed there, and copying the path out is the whole point of
the chord.
Reading is a new read_clipboard effect answered by an ordinary Event.paste, so
the round trip is honest about being one: SDL and NSPasteboard answer inside
the same drain, the browser answers a promise, and a terminal answers over
OSC 52 or -- far more often -- refuses. A refused read is a paste that does
not happen, and the request dies at the next keystroke rather than landing
minutes late in whatever pane is focused by then.
The tty shell also enables BRACKETED PASTE now and coalesces
paste_start..paste_end into one event. Before this a paste arrived as a flood
of individual key presses: plausible in insert mode, and in normal mode every
pasted character ran as a command.
n/N. They stepped the armed results buffer and immediately Looked each row, so
you could not walk past a hit without opening it. They are a MOTION now:
select the next look-able text, open nothing, and let Enter decide. What they
step is the largest whitespace-delimited run look.resolve can act on
(look.lookableSpan, wrapper punctuation peeled), over a RING of panes -- every
pane that has performed a look, most recent first, then the output buffers
that have not, newest first, and only if both are empty the pane in front of
you. N is the exact inverse of n, computed rather than remembered: both
directions ask the same question about the same spans and compare against the
column the walk parks on, so x presses one way and x back land exactly where
you started, pane boundaries and the ring's seam included.
A ring rather than a list with two ends because a shell's cursor sits at the
prompt, below everything it has printed, so a walk that could not come round
would have nowhere to go on the very first press -- which is the case n/N were
written for.
One motion everywhere, no pane-kind or buffer-kind special case. The only
thing a buffer may change is the GRAIN of what a step selects, and it does it
with one flag rather than a branch: output_pane.Traits.commands (renamed from
`executes`, which named one reader's behaviour rather than the fact) makes a
row select WHOLE, because a ThemeSel line is a word to run and has no path
inside it to pick out. `]d`/`[d` are not n/N -- they are helix's diagnostic
motions, their job is to ARRIVE, and they still reach searchStep.
THE TTY PROMPT. Leaving raw tty blanked the prompt row, and the command you
had typed at that prompt shares the row, so it went too -- a shell out of tty
read as output only. OSC 133 marks the row CELL by cell, so the two are
separable: config.tty_blank = .prompt cuts the prompt's own columns and leaves
the command, left-hugged at column 0 in line with the output under it rather
than in a bay of blanks. .prompt_and_input is the old behaviour, kept.
Because the row is now something you can put a cursor in, enterTty adds the
hidden prompt width back before asking ghostty to walk the shell's own cursor
to it -- the modal column on a cut row is short by exactly that much.
Verified: unit-test 186/186 (nine new), snap 87/87 (new ttyprompt.snap),
hxdiff 481 and hxparity 561 with 0 mismatches, tty and gui both build. And
against the real binaries rather than the harness: in a pty, SPC y emits OSC
52 carrying exactly the selection while plain y emits nothing, SPC p issues
the read and pastes the reply, and a bracketed paste of "dd..." inserts text
instead of deleting two lines. In a real SDL window, SPC y then SPC p round
trips through the system clipboard while the default register holds different
text. Setting tty_blank back to .prompt_and_input reproduces all 86 old
goldens byte for byte.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The AppKit shell now draws what the core renders, follows the theme without a
relaunch, and builds into something you can hand to someone.
- Pixel attachments. Surface.images was dropped on the floor here, so a PDF
pane showed nothing at all: native_images is now set, pardes_image_s carries
the geometry the core already clipped, and PardesView keeps one CGImage per
(serial, page, revision) so scrolling costs a draw and not a decode. Image
panes get real pixels instead of the petscii fallback.
- Themes take hold live. pardes_tick never advanced the chrome animation, so
every tagline kept the previous theme's colours until the next launch and
the 16 ms re-pump spun for the rest of the session. pardes_theme_bg retires
the hand-agreed #121212 and drives the window background and the titlebar
appearance; a theme with no background of its own now gets a transparent
window over an NSVisualEffectView.
- The cell snaps to whole DEVICE pixels rather than whole points. Monaco
advances 8.4014pt at 14, so ceiling to 9 spaced every column 7.1% wider than
the face was drawn for.
- The dial is one notch per 10 degrees instead of 20, and a release keeps
turning in proportion to how hard it was thrown -- ramping up from zero at
the floor, so a slow twist coasts not a little but not at all.
- A file dropped on the grid is a click plus Look, so it opens beside the pane
it was dropped on. No drop concept was added to the core.
- The titlebar follows the focused pane: proxy icon, filename, and the dirty
dot. File.saved_revision is the watermark that last one needed.
- Config (SPC f c) prints the resolved startup config path.
- build.zig assembles, signs and packages the bundle itself; build-app.sh is
gone. -Dmacos-identity= takes a Developer ID, macos-dmg makes the image, and
the icon is Glenda.
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Esc ran Toggleterm, which hopped between the newest DOC and the newest
TERMINAL. That distinction never earned its keep. It made Esc unpredictable —
which of three panes you landed on depended on their kinds, not on where you
had been — and it could not alternate between two files at all, which is the
case you hit most. Editing two files, Esc did nothing.
The replacement already existed. Last (SPC j j) is "the pane you were in
before this one, whichever it was": it walks the jump stack for the newest
entry naming a different pane and restores its line and column. So Esc, and
Shift-Esc in tty, now run Last, and Toggleterm is deleted rather than renamed
— a third implementation of "go to the other pane" was the thing to avoid.
SPC w t goes with it; the w group is the four directional moves, and the jump
group already had SPC j j.
Held down, Esc alternates. Two files, a file and its shell, a file and a
+Search — all the same, because Last has no notion of kind to get wrong.
This depends on the swap in the same series: Last reads the stack backwards,
and until hopping stopped appending, the pane you came from could fall off it.
windownav.snap needed only its keys and prose changed — its golden did not
move at all, which is the useful evidence here: for the one scenario the old
builtin handled well, Last produces an identical focus sequence.
Coverage for what it did not handle is new: a unit test opens a second FILE by
looking its name and asserts Esc alternates between two panes of the SAME
kind, which is the case that used to be a no-op.
Docs follow: tutor.txt, docs/helix-keys.md, docs/design.typ, and the builtin
index goldens, which are now one row shorter.
75/75 snapshots, both unit suites, and the macOS ABI build all pass.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
search/range look steps, goldens updated
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
file:LINE:COL-ENDLINE:ENDCOL, with the two short forms people actually type
reading naturally: file:412:9-21 on one line, file:412-418 whole ones. Ends are
inclusive. A path feature, not a search feature — a ranged path typed in a tag
or middle-clicked out of a shell's output selects just the same; search is only
its first consumer.
The dash is the fussy part. `-` was already a file char, so a ranged word
survives click expansion whole, but a range needs a number on BOTH sides or
my-file:10, build-2 and 2026-07-30 would stop being paths. Table-driven test in
look.zig for exactly that.
Selecting goes through the cellRange/setPaneRange pair the multi-cursor work
left, and hxOff clamps both ends, so a stale range selects what still exists
rather than crashing or reaching past EOF — pinned with an 8:6-400:9 range in a
nine-line file.
Producers: / search, Grep, and five LSP sites through a new spanRow — goto,
references, rename tokens and both symbol lists were throwing away real
protocol ranges at path:line:col. Left alone deliberately: Find rows are bare
paths with nothing to span, a jump is a spot not a span, and the diagnostic and
format paths only ever have a point, where half a range would be worse than
none.
One knock-on worth knowing: n now leaves an EXPLICIT selection, so a topbar
execute chords it. grep.snap's no-match step was silently becoming
`Grep TARGET`; it runs from the leader path now, which never chords, and the
dedicated chord steps stayed where they were.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
228 in the ring: 3 pardes ships plus all 214 helix runtime themes and all 11
zed variants across its three families. No exclusions.
inherits is what this cost. 76 themes need it, so the reader is two passes now,
and the merge is WHOLE-KEY rather than field-wise because helix merges the
theme body at depth 1 — the three *_transparent themes clear their parent's
background with an empty table, and a field-wise merge would leave it painted.
I had that wrong until I read helix-view/src/theme.rs.
At 214 files the generator meets themes that are SPARSE rather than broken, and
the old fatal-on-anything-missing would have rejected them. Every fallback is
helix's own rule: no background at all means wear the terminal's, so bg and fg
go null (13 themes, correctly); the twelve RGB fields that cannot be null fall
back to ghostty's default palette entries 7 and 0, which is exactly what a
pardes terminal already paints an unstyled ANSI index as. fatal is kept for
what genuinely cannot be read.
Three real bugs surfaced only at scale: #ccc shorthand doubles the nibble
(helix's rule, 58 colours), a quoted inline-table key silently dropped a
selection colour, and four themes name a cursor background EQUAL to the page
because they are about to reverse that cell — taking it painted an invisible
move box. 0 degenerate themes out of 225 now: no fg==bg, no syntax colour on
its own background, no invisible box.
Collisions get an unconditional rule rather than a clever one: a zed variant is
always <name>_zed, because both projects ship gruvbox, ayu and one, and a
conditional tag would move a name when the other source changes. A comptime
assert holds it.
Cost: no-op build 0.257 -> 0.276s, a pardes.zig change 46.8 -> 47.5s, binary
+0.98%. The generator does 217 sources in 54ms.
NextColor stays and is no longer a way to REACH a theme — but the browse got
better, not worse: the generated half sorts by name, so its neighbours are that
theme's own family. theme.golden's fourth click moved from ayu_dark to acid,
which sorting 225 names does; themesel gained a tail capture proving row 228
renders.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Each theme is a .zig file of pure data and nothing enumerates them by hand —
fold() walks the container's declarations, so a theme is a file and that is the
whole registration. Field by field rather than a wholesale coercion, which
makes a missing field a compile error that names it.
tools/gen_themes.zig reads helix .toml and zed .json out of vendor/themes and
emits one .zig each; build.zig reads that directory, so adding a theme is
dropping a file in. Output goes to the build cache rather than the tree, so zig
owns the freshness check and a deleted source cannot leave a stale theme
behind. Vendored, not read from the genizah: the build stays offline. A source
it cannot map is a hard error naming the file and the key, never a silently
black-on-black theme.
ThemeSel is the clever half. Traits gained an `executes` column, so n/N over
that buffer hands the whole line to Exec instead of the leading word to Look —
both arms the ordinary builtin, so a stepped row does exactly what the matching
mouse button on it would. Stepping the list previews each theme live. The trait
is a pane property, not an output-pane branch, so any pane whose lines are
commands can opt in.
Goldens: leader gains SPC t t; theme's fourth NextColor no longer wraps to
helix because the ring is fifteen long. New: themesel.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
One container, not two: focus_hist (a stack of pane ids rebuilt every sync) is
now jumps[] + a current pointer, and the +Jumps buffer is a RENDERING of that
array — nothing copies it, nothing shadows it. prevFocus, Toggleterm, Look's
directory order, Back/Forward, Last and Jumplist all walk the one list.
A pane id is reused, so a location that only remembered an id would retarget
after a respawn: panes now carry a monotonic serial and an entry whose slot
holds a different serial is dead. trackJump compacts those out and fixes the
pointer in the same pass.
The push rule lives in ONE place and says: a location is worth remembering
when you cannot see it any more — a different pane, or more than a bodyful of
rows away in the same one. So hjkl never grows the list and 100G, a search hit
and a goto-definition do.
Ctrl-o/Ctrl-i walk it, SPC j j toggles the last two, SPC j l lists them.
Ctrl-i IS Tab on a legacy host, where the binding simply never fires and
Tab-executes is untouched; kitty reports them apart. SPC j o/i work anywhere.
Two goldens moved, both the SPC ? Help listing gaining four rows.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Their only special feature is now the keys they are assigned. `Look main.zig`
typed in a tag is the same look a right click is; config.look_cmd/exec_cmd
point the two buttons and Enter/Tab at them, so retargeting Enter to Grep is
one line. actOnSelection — a hand-written cascade with the builtin dispatch
nested inside it — is gone, and the `button` parameter it threaded through five
KEYBOARD call sites went with it.
New syntax, spelled once in config.zig: @`ls -la` names a command to run
rather than a file to open. Word expansion takes the quoted run whole, the way
acme does for its own </|/> words, so a click inside one does not hand Look the
fragment `ls`.
And it nests: @`Look .` unwraps, re-enters the dispatcher, and looks at the
directory. Guarded at depth 8, which is unreachable today (every re-entry
strips a word or a delimiter pair, so the string strictly shrinks) and exists
for a future syntax that does not shrink.
leader_path is now optional: a builtin may have no SPC path when its shortcut
is a key and a mouse button. New golden cmdword; the other 59 unmoved.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
An output buffer was a file pane with a flag, and everything special about it
was re-derived from outside by asking the wrong question: the buffer NAME
("+Search", "+Help"), a parallel search_kind field, and f.output predicates
sprinkled through kind-agnostic code.
Now it carries its Origin — the Builtin, or the lsp.Kind for the five gotos
helix binds as motions rather than words — plus that command's argument, and
one Traits table answers every question the scattered code used to ask: what
it is called, whether n/N steps it, whether it is a doc for layout, whether
Esc dismisses it, whether it saves. The name is derived FROM the command
instead of being the thing that identifies it.
Adding a kind of output pane is adding a row. No golden moved.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Retargeting a key, a mouse chord or a spelling is now an edit to src/config.zig
and nothing else. Three parts in reading order: pardes's own bindings (where a
reader lands), the Look/Exec syntax, then the helix keymap under a banner
saying hxdiff/hxparity are differential suites against real helix, so a key
moved there is a divergence and not a tweak.
The bindings are data a comptime loop can walk, because the builtin index is
going to walk them.
Duplication this cut: is/isC/isA became one hit(key, chords) over ~132 call
sites, and a binding being a LIST collapses the letter-or-arrow chains;
swap_enter_tab is gone, replaced by look_key/exec_key that can point anywhere;
the four focus builtins' h/j/k/l lived hardcoded in two places and is now one
table.
No golden moved.
|
|
|
their own files
The core now lies FLAT at src/ and every subdirectory is one backend, so a
file being in no directory at all is what says it is core. Pane-kind bodies
leave pardes.zig for term_pane.zig / file_pane.zig / output_pane.zig, leaving
it the layout, the event/effect machine and the generic render loop.
Builtins are one struct each in builtins.zig, and the enum is folded out of
the file's own declaration list at comptime — a zig file IS a struct, so the
list of builtins and the builtins themselves are the same text. Adding one is
writing a struct. Key paths deliberately stay one table for the config pass.
Pure refactor: no golden moved.
|
